CHARACTERISTICS
Compatible with Syringes of any Brand.
Automatical Calibration for Syringes of any Brand .
Two channel with two governer.
More economy and save space.
Three working modes: Rate control mode,Time control mode and Dose-Weight control mode.
Automatical Detection of Syringe types and settings.
Broad range in delivery rate settings.
8 Hours internal battery life  in high capacity.
Three levels of alarm volume: high, medium and low.
Three levels of occlusion pressure: high, medium and low.
KVO function：After infusion is complete, the pump automatically switches to the smallest flow to prevent creating the thrombus.
SPECIFICATIONS
Compatible Syringe: Any standard syringe with 10ml、20ml(30ml) and 50ml(60ml)
Accuracy: ±2% ( Any manufacturers of syringes, right after calibration )
Delivery Rate Range:
50ml(60ml)：0.1ml/h～1800.0ml/h (0.1ml/h step)
20ml(30ml)：0.1ml/h～800.0ml/h (0.1ml/h step)
10ml：0.1ml/h～400.0ml/h (0.1ml/h step)
Time Mode Range:
Volume：0.1～999.9ml (0.1ml step)
TIME：1～1999min (1min step)
Body Weight Mode Range:
Volume：0.1～999.9ml(0.1ml step)
DRUG MASS：0.1～999.9mg(0.1mg step)
DOSE：0.01～99.99ug/kg/min(0.01ug/kg/min step)
WEIGHT：0.1～300kg(0.1kg the least step)
Volume Limit Range: 0～1999.9ml (0.1 ml step)
Total Volume Range: 0.1～1999.9ml (0.1 ml step)
Rapid injection: 50ml(60ml)：1800.0ml/h, 20ml(30ml)：800.0ml/h, 10ml：400.0ml/h
KVO Rate: 1ml/h
Alarms:
Near empty, Syringe empty, Volume complete(a volume limit has been set ), Occlusion, Syringe loose, Operation error, Low battery and other device failures.
Power Supply:
AC power supply: AC 100 to 240V±10%，50/60Hz；
Internal LI Battery: 11.1V, 2000mAh. Approximmately 8 hours of continuous operation on a new and fully  charged battery running at 5ml/h.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type BF
Dimensions: 280mm(L)×160mm(W)×130mm(H)
Net Weight: Approximately. 3.0kg
Operating Conditions: Ambient temperature: 5 to 40℃　Relative humidity: 20 to 90%
Storage Condition: Ambient temperature: -10 to 55℃　Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual
 

 

CHARACTERISTICS
Compatible with Syringes of any Brand.
Automatical Calibration for Syringes of any Brand .
Two channel with two governer.
More economy and save space.
Three working modes: Rate control mode,Time control mode and Dose-Weight control mode.
Automatical Detection of Syringe types and settings.
Broad range in delivery rate settings.
8 Hours internal battery life  in high capacity.
Three levels of alarm volume: high, medium and low.
Three levels of occlusion pressure: high, medium and low.
KVO function：After infusion is complete, the pump automatically switches to the smallest flow to prevent creating the thrombus.
SPECIFICATIONS
Compatible Syringe: Any standard syringe with 10ml、20ml(30ml) and 50ml(60ml)
Accuracy: ±2% ( Any manufacturers of syringes, right after calibration )
Delivery Rate Range:
50ml(60ml)：0.1ml/h～1800.0ml/h (0.1ml/h step)
20ml(30ml)：0.1ml/h～800.0ml/h (0.1ml/h step)
10ml：0.1ml/h～400.0ml/h (0.1ml/h step)
Time Mode Range:
Volume：0.1～999.9ml (0.1ml step)
TIME：1～1999min (1min step)
Body Weight Mode Range:
Volume：0.1～999.9ml(0.1ml step)
DRUG MASS：0.1～999.9mg(0.1mg step)
DOSE：0.01～99.99ug/kg/min(0.01ug/kg/min step)
WEIGHT：0.1～300kg(0.1kg the least step)
Volume Limit Range: 0～1999.9ml (0.1 ml step)
Total Volume Range: 0.1～1999.9ml (0.1 ml step)
Rapid injection: 50ml(60ml)：1800.0ml/h, 20ml(30ml)：800.0ml/h, 10ml：400.0ml/h
KVO Rate: 1ml/h
Alarms:
Near empty, Syringe empty, Volume complete(a volume limit has been set ), Occlusion, Syringe loose, Operation error, Low battery and other device failures.
Power Supply:
AC power supply: AC 100 to 240V±10%，50/60Hz；
Internal LI Battery: 11.1V, 2000mAh. Approximmately 8 hours of continuous operation on a new and fully  charged battery running at 5ml/h.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type BF
Dimensions: 280mm(L)×160mm(W)×130mm(H)
Net Weight: Approximately. 3.0kg
Operating Conditions: Ambient temperature: 5 to 40℃　Relative humidity: 20 to 90%
Storage Condition: Ambient temperature: -10 to 55℃　Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual
 

 

CHARACTERISTICS
Compatible with Syringes of any Brand.
Automatical Calibration for Syringes of any Brand .
Three working modes: Rate control mode,Time control mode and Dose-Weight control mode.
Automatical Detection of Syringe types and settings.
Broad range in delivery rate settings.
8 Hours internal battery life  in high capacity.
Three levels of alarm volume: high, medium and low.
Three levels of occlusion pressure: high, medium and low.
KVO function：After infusion is complete, the pump automatically switches to the smallest flow to prevent creating the thrombus.

SPECIFICATIONS
Compatible Syringe: Any standard syringe with 10ml、20ml(30ml) and 50ml(60ml)
Accuracy: ±2% ( Any manufacturers of syringes, right after calibration )
Delivery Rate Range:
50ml(60ml)：0.1ml/h～1800.0ml/h (0.1ml/h step)
20ml(30ml)：0.1ml/h～800.0ml/h (0.1ml/h step)
10ml：0.1ml/h～400.0ml/h (0.1ml/h step)
Time Mode Range:
Volume：0.1～999.9ml (0.1ml step)
TIME：1～1999min (1min step)
Body Weight Mode Range:
Volume：0.1～999.9ml(0.1ml step)
DRUG MASS：0.1～999.9mg(0.1mg step)
DOSE：0.01～99.99ug/kg/min(0.01ug/kg/min step)
WEIGHT：0.1～300kg(0.1kg the least step)
Volume Limit Range: 0～1999.9ml (0.1 ml step)
Total Volume Range: 0.1～1999.9ml (0.1 ml step)
Rapid injection: 50ml(60ml)：1800.0ml/h, 20ml(30ml)：800.0ml/h, 10ml：400.0ml/h
KVO Rate: 1ml/h
Alarms:
Near empty, Syringe empty, Volume complete(a volume limit has been set ), Occlusion, Syringe loose, Operation error, Low battery and other device failures.
Power Supply:
AC power supply: AC 100 to 240V±10%，50/60Hz；
Internal LI Battery: 11.1V, 2000mAh. Approximmately 8 hours of continuous operation on a new and fully  charged battery running at 5ml/h.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type BF
Dimensions: 280mm(L)×160mm(W)×130mm(H)
Net Weight: Approximately. 3.0kg
Operating Conditions: Ambient temperature: 5 to 40℃　Relative humidity: 20 to 90%
Storage Condition: Ambient temperature: -10 to 55℃　Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual
 

CHARACTERISTICS
Compatible with Syringes of any Brand.
Automatical Calibration for Syringes of any Brand .
Three working modes: Rate control mode,Time control mode and Dose-Weight control mode.
Automatical Detection of Syringe types and settings.
Broad range in delivery rate settings.
8 Hours internal battery life  in high capacity.
Three levels of alarm volume: high, medium and low.
Three levels of occlusion pressure: high, medium and low.
KVO function：After infusion is complete, the pump automatically switches to the smallest flow to prevent creating the thrombus.

SPECIFICATIONS
Compatible Syringe: Any standard syringe with 10ml、20ml(30ml) and 50ml(60ml)
Accuracy: ±2% ( Any manufacturers of syringes, right after calibration )
Delivery Rate Range:
50ml(60ml)：0.1ml/h～1800.0ml/h (0.1ml/h step)
20ml(30ml)：0.1ml/h～800.0ml/h (0.1ml/h step)
10ml：0.1ml/h～400.0ml/h (0.1ml/h step)
Time Mode Range:
Volume：0.1～999.9ml (0.1ml step)
TIME：1～1999min (1min step)
Body Weight Mode Range:
Volume：0.1～999.9ml(0.1ml step)
DRUG MASS：0.1～999.9mg(0.1mg step)
DOSE：0.01～99.99ug/kg/min(0.01ug/kg/min step)
WEIGHT：0.1～300kg(0.1kg the least step)
Volume Limit Range: 0～1999.9ml (0.1 ml step)
Total Volume Range: 0.1～1999.9ml (0.1 ml step)
Rapid injection: 50ml(60ml)：1800.0ml/h, 20ml(30ml)：800.0ml/h, 10ml：400.0ml/h
KVO Rate: 1ml/h
Alarms:
Near empty, Syringe empty, Volume complete(a volume limit has been set ), Occlusion, Syringe loose, Operation error, Low battery and other device failures.
Power Supply:
AC power supply: AC 100 to 240V±10%，50/60Hz；
Internal LI Battery: 11.1V, 2000mAh. Approximmately 8 hours of continuous operation on a new and fully  charged battery running at 5ml/h.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type BF
Dimensions: 280mm(L)×160mm(W)×130mm(H)
Net Weight: Approximately. 3.0kg
Operating Conditions: Ambient temperature: 5 to 40℃　Relative humidity: 20 to 90%
Storage Condition: Ambient temperature: -10 to 55℃　Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual
 

Smooth consistent plunger action clear, legible and accurate graduation minimal dead space.

0.3ML 0.5ML 1.0 ML available
Gamma ray resistant material are available
Latex free rubber seal are available
PE or blister are available

Smooth consistent plunger action clear, legible and accurate graduation minimal dead space.

0.3ML 0.5ML 1.0 ML available
Gamma ray resistant material are available
Latex free rubber seal are available
PE or blister are available

Product Description
Syringe Size 10mL, 20mL, 30mL, 50mL

Applicator Syringe:
Brand  Build-in 10 brands of syringe, 2 reservisions for user-defined
Volume Limit  0.1~9999mL; <1000mL 0.1mL increment;  1000mL 1mL increment

Flow rate range  Syringe 10mL: 0.1~400mL/h; Syringe 20ml: 0.1~600mL/h
Syringe 30mL: 0.1~900mL/h; Syringe 50ml: 0.1~1300mL/h
<100mL/h 0.1mL/h increment or decrement;  100mL/h 1mL/h increment or decrement

Bolus rate Syringe10mL: 400mL/h; 20mL: 600mL/h
30mL: 900mL/h; 50mL: 1300mL/h
KVO rate  0.1mL/h~1mL/h(adjustalbe); 0.1mL/h increment or decrement
Accuracry   2%(with approved syringe mechanical accuracy less than 1%)
Alarm  Occlusion\syringe drop off\near empty\completion\low battery\ battery power off\AC power loss\, Motor Abnormal working\No action\Syringe moved by accident\Pressure sensor error
Other function  Syringe Automatic Identification\Bolus\Three work modes(time, speed, body weight), accumulated volume display, occlusion
Release, mute, over flow rate range control, AC and DC Auto-switch, residual solvent alarm, Previous settings memory

Occlusion sensitivity  Adjustable(High, middle, low)
0.02MPa~0.06Mpa, 0.06MPa~0.09Mpa, 0.09MPa~0.12MPa
Keys  9 keys and 1 jog-shuttle
Display  LCD DOT-matrix display\LED indicator(battery charge\AC\alarm)\luminance;
Display information  LED: For battery charge, AC, alarm
LCD: Flow rate, accumulated volume, syringe specification, alarm, fault handling solution
Power supply  AC: 220V 22V/50Hz 1Hz
DC: 9.6V 1.6V(over 3 hours continues work at the flow rate of 5ml/h when fully charged)
Power consumption  15VA
Safety classify  Class type CF; Enclosure protection level: IPX3
Enclosure  PC+ABS(UL94; V-0)
Weight  Less than 2.5Kg
Dimension(mm) 314 167 140
Working conditions  temperature: 5C~40C; Relative humility: 20%~90%(no condensation);
Atmospheric pressure: 86KPa~106KPa
Storage conditions  temperature: -20C~55C;

For more information, please contact us.

Product Description
Syringe Size 10mL, 20mL, 30mL, 50mL

Applicator Syringe:
Brand  Build-in 10 brands of syringe, 2 reservisions for user-defined
Volume Limit  0.1~9999mL; <1000mL 0.1mL increment;  1000mL 1mL increment

Flow rate range  Syringe 10mL: 0.1~400mL/h; Syringe 20ml: 0.1~600mL/h
Syringe 30mL: 0.1~900mL/h; Syringe 50ml: 0.1~1300mL/h
<100mL/h 0.1mL/h increment or decrement;  100mL/h 1mL/h increment or decrement

Bolus rate Syringe10mL: 400mL/h; 20mL: 600mL/h
30mL: 900mL/h; 50mL: 1300mL/h
KVO rate  0.1mL/h~1mL/h(adjustalbe); 0.1mL/h increment or decrement
Accuracry   2%(with approved syringe mechanical accuracy less than 1%)
Alarm  Occlusion\syringe drop off\near empty\completion\low battery\ battery power off\AC power loss\, Motor Abnormal working\No action\Syringe moved by accident\Pressure sensor error
Other function  Syringe Automatic Identification\Bolus\Three work modes(time, speed, body weight), accumulated volume display, occlusion
Release, mute, over flow rate range control, AC and DC Auto-switch, residual solvent alarm, Previous settings memory

Occlusion sensitivity  Adjustable(High, middle, low)
0.02MPa~0.06Mpa, 0.06MPa~0.09Mpa, 0.09MPa~0.12MPa
Keys  9 keys and 1 jog-shuttle
Display  LCD DOT-matrix display\LED indicator(battery charge\AC\alarm)\luminance;
Display information  LED: For battery charge, AC, alarm
LCD: Flow rate, accumulated volume, syringe specification, alarm, fault handling solution
Power supply  AC: 220V 22V/50Hz 1Hz
DC: 9.6V 1.6V(over 3 hours continues work at the flow rate of 5ml/h when fully charged)
Power consumption  15VA
Safety classify  Class type CF; Enclosure protection level: IPX3
Enclosure  PC+ABS(UL94; V-0)
Weight  Less than 2.5Kg
Dimension(mm) 314 167 140
Working conditions  temperature: 5C~40C; Relative humility: 20%~90%(no condensation);
Atmospheric pressure: 86KPa~106KPa
Storage conditions  temperature: -20C~55C;

For more information, please contact us.

Features:
All the parts are made by virgin grade medically raw material, with is sterile, pyrogen-free and atoxic
Tightened inspection and sterilizing make the disposable syringe safer.
Disposable design

Specification:
3-Pieces set: needle, barrel, plunger
Sizes:1ml, 2ml, 3ml, 5ml, 10ml, 20ml, 50ml, 60ml, 100ml
Needle:16G--27G
latex-free or Latex plunger
Breakable plunger-NO REUSE
Siliconized for easy and smooth plunger slide
Positive plunger stop
Permanent engraved fine scale marking on barrel
Grid plunger top for controlled injection

Quality:
ISO13485:2007
CE 0123

Material:
PP, Stainless steel needle

Sterilization:
EO

Shelf life:
5 years

Packing:
polybag(PE) or blister packed
 

Features:
All the parts are made by virgin grade medically raw material, with is sterile, pyrogen-free and atoxic
Tightened inspection and sterilizing make the disposable syringe safer.
Disposable design

Specification:
3-Pieces set: needle, barrel, plunger
Sizes:1ml, 2ml, 3ml, 5ml, 10ml, 20ml, 50ml, 60ml, 100ml
Needle:16G--27G
latex-free or Latex plunger
Breakable plunger-NO REUSE
Siliconized for easy and smooth plunger slide
Positive plunger stop
Permanent engraved fine scale marking on barrel
Grid plunger top for controlled injection

Quality:
ISO13485:2007
CE 0123

Material:
PP, Stainless steel needle

Sterilization:
EO

Shelf life:
5 years

Packing:
polybag(PE) or blister packed