Animal ID Transponder Syringe contains the syringe body and the ZS001 Electronic Tag, which specially designed for the management of the animal raising and butchering. It meets the international standard of animal identification. It is designed and produced on the imported high-level chips and it has both read and write functions, and also has a unique design of data security. In the animal raising and butchering, it can trace the animal’s identification by using our company’s readers together.

Specifications:

 Product introduction
XB-1202 dual Syringe Pump is designed for delivery of anesthetic drugs by target-controlled infusion mode according to the pharmacokinetics. The pump makes good use of the 32 bit CPU and built-in intellectualized operation System, and has two syringe drive systems which can delivery drugs independently and cooperatively.It has the powerful performance of calculation and good expansibility of functions. It is fit for mainlining anesthetic drugs.


Functions and Features:
(1) Operation modes: Plasma Target-Controlled Infusion mode, Effect site Target-Controlled Infusion mode and Flow rate controlled infusion mode, volume and time controlled infusion mode, intermittent infusion mode .
(A) Plasma target controlled Infusion mode enables users to set the target plasma concentration, Effect site target Controlled Infusion mode enables users to set the target effect site concentration. The pump delivers drugs to maintain the desired concentration according to the pharmacokinetic model. The Infusion rates are altered automatically.
B) Flow rate controlled infusion mode: It enables the users to control the infusion by setting the flow rate. There are seven flow rate units of available such as ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
C) Intermittent Infusion mode: It enables the user to control the infusion by setting the flow rate to be infused, volume to be infused per interval, intermitted time per interval, and KVO rate during intermitted time. It is fit for infusing the drugs which has long effect duration.
D) Volume and time controlled infusion mode: It enables the users to control the infusion by setting the desired volume and the desired time to be infused.
(2) Available drugs: Fentanyl, Alfentanil, Sufentanil, Midazolam, Propofol, Etomidate, Vecuronium, Atracurium, Rocuronium, Remifentanil, Ketamine.
(3) Automatic compensation for drug when the infusion is paused and maintain the concentration required.
(4) Advanced intelligence, recovery time forecast function, help the doctors to stop the infusion at the right time.
(5) RS-232 communication: this enables the history data to be transmitted from pump to PC.
(6) Bolus function: help patients to past the stimulative phase safely and steadily.
(7) KVO function: automatically start the KVO(keep the vein open) infusion when the normal infusion stopped.
(7) Closed-loop Target-Controlled Infusion: Connected to a specified anesthetic depth monitor (Aspect A2000/3000 BIS monitor) with RS232, the pump can adjust the target plasma or effect site concentration automatically according to the feedback from the monitor.
(8) Alarm and Warns: when something abnormal occurs, the pump can give out alarming and warning information such as AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged, check syringe etc.
(9) Available syringe :all kinds of syringe whose standard capacity is in the standard capacity set 10ml,20ml,50(60)ml can be used in the pump by custom syringe’s setting. And the infusion accuracy can be guaranteed.


SPECIFICATIONS:
Range of flow rate: 10ml syringe: 0.1~300ml/h;
20ml syringe: 0.1~600ml/h;
50(60)ml syringe: 0.1~1200ml/h;
Suitable Syringe: all the syringe in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe’s setting.
Accuracy: ±3% (on condition that the total infusion capacity is more than 5.0ml and the infusion rate is more than 2.0ml/h and the syringe extension set have been purged)
Bolus rate: 300ml/h
Display: A large Screen(320×240pixel), rotary setting with convenient operation interface.


Operating conditions:
Ambient temperature: +5℃～+40℃
Relative humidity (RH): 30 %～75 %
Power supply:
AC:100V～245V、50 ±1Hz
Battery: 14.8V battery can use for more than 3 hours after charged for 10 hours.
Atmospheric pressure: 860~1060hPa
Dimension (mm): 272(L) ×200(W) ×270(H)
Weight: 3.9kg
Safety Classification: Class II and Type CF
 

Stackable Syringe Pump
Functions and features:
(1) Operation modes: Flow rate controlled infusion mode. Volume and Time controlled infusion mode, Total intravenous anesthesia infusion (TIVAI)mode.
A) flow rate controlled infusion mode: Control by flow rate: Seven flow rate units: Ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
B) Volume and Time Controlled Infusion: Control by the desired volume and time. C) Total intravenous anesthesia infusion (TIVAI) mode: Controlled by the first dose, the time need for the initial infusing dose and the maintain infusion rate.
(3) KVO function: Automatically start KVO when infusion stopped.
(4) Alarm and Warns: When AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged etc. It will send alarms.
(5) Available syringe: All kinds of 10ml, 20ml, 50(60)ml syringes.
(6) Modular design, designed for both stationary and mobile use freely. The pumps can be assembled to a unit to save room or mounted independently.

SPECIFICATIONS:
Range of Flow rate: 10ml syringe: 0.1~300ml/h; 20ml syringe: 0.1~600ml/h; 50(60)ml syringe: 0.1~1200ml/h;
Suitable Syringe: All the standard 10ml, 20ml, 50(60)ml syringes. Accuracy: +/-3% Bolus rate: 300ml/h
 

XB-1101 syringe pump is a kind of intellectualized automatic infusion device which is designed for delivery of vein by a constant flow rate. The product can be applied to clinical application of intravenous Injection. It is characterized by precision of dosage rate, sufficient function and simple operation.
Functions and Features:
(1) Operation modes: Flow rate controlled infusion mode, volume and time controlled infusion mode.
A) flow rate controlled infusion mode: There are seven flow rate units of available such as ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
B) Volume and Time Controlled Infusion mode: It enables the users to control the infusion by setting the desired volume and the desired time to be infused, it will be the assistance to the traditional manual injection.
(2) Bolus function: Help patients to past the stimulative phase safely and steadily.
(3) KVO function: Automatically start the KVO(keep the vein open) infusion when the normal infusion stopped.
(4) Non-volatile memory: The pump memories all the setup parameters and history data of the last infusion.
(5) Alarm and Warns: When something abnormal occurs, the pump can give out alarming and warning information such as AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged etc.
(6) Available syringe: All kinds of syringe whose standard capacity is in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting. And the infusion accuracy can be guaranteed.

SPECIFICATIONS:
Range of Flow rate: 10ml syringe: 0.1~300ml/h;
20ml syringe: 0.1~400ml/h;
50(60)ml syringe: 0.1~600ml/h;
Accuracy: +/-3% (on condition that the total infusion capacity is more than 5.0ml and the infusion rate is more than 2.0ml/h and the syringe extension set have been purged)
Bolus rate: 300ml/h
Display: A large screen (128*64 pixel), rotary setting with convenient operation interface.
Operating conditions:
Ambient temperature: +5~+40C
Relative humidity (RH): 30 %~75 %
Power supply:
AC: 100V~245V\50 +/-1Hz
Battery: 14.4V battery can use for more than 3 hours after charged for 10 hours.
Atmospheric pressure: 860~1060hPa
Dimension (mm): 336(L)*153(W)*132(H)
Weight: 2.5kg
Safety Classification: Class II and Type C

XB-1102 Anaesthesia Syringe Pump
Product introduction:
XB-1102 Anaesthesia Syringe Pump is a kind of intellectualized automatic infusion devices, which is designed for delivery of anesthetic drugs by target-controlled infusion mode according to the pharmacokinetics and the experience in clinical use. It makes use of the integration of the technology of micro-processor control and precise manufacture. It is available for performing an intravenous analgesia infusion. It is Applicable to all the inpatient surgical anesthesia and endoscopic examination, sedation of ICU patients etc. It is characterized by accurate infusing, sufficient function and simple operation.

Functions and Features:
(1) Operation modes: Plasma target controlled infusion mode, Effect site target controlled infusion mode and Flow rate controlled infusion mode.
A) Plasma target controlled Infusion mode enables the users to set the target plasma concentration, Effect site target Controlled Infusion mode enables the users to set the target effect site concentration. The pump delivers drugs to maintain the desired concentration according to the pharmacokinetic model. The Infusion rates are altered automatically.
B) Flow Rate Controlled Infusion mode: It enables the users to control the infusion by setting the flow rate. There are seven flow rate units of available such as ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
(2) Available drugs: Fentanyl, Alfentanil, Sufentanil, Midazolam, Propofol, Etomidate, Vecuronium, Atracurium, Rocuronium, Remifentanil, Ketamine.
(3) Automatic compensation for drug when the infusion is paused and maintain the Plasma or Effect site concentration required.
Advanced intelligence, recovery time forecast function, which helps the doctors to stop the infusion at the right time.
(4) RS-232 communication: It enables the history data to be transmitted from pump to PC.
(5) Alarm and Warns: When something abnormal occurs, the pump can give out alarming and warning information such as AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged etc.
(6) Syringe available: All kinds of syringe whose standard capacity is in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting. And the infusion accuracy can be guaranteed.

SPECIFICATIONS:

Range of Flow rate:
10ml syringe: 0.1~300ml/h;
20ml syringe: 0.1~600ml/h;
50(60)ml syringe: 0.1~1200ml/h;
Suitable Syringe: All the syringe in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting.
Accuracy: +/-3% (on condition that the total infusion capacity is more than 5.0ml and the infusion rate is more than 2.0ml/h and the syringe extension set have been purged)
Display: A Large Screen(240*180pixel), rotary setting with convenient operation interface.
Non-volatile memory: The pump memories all the setup parameters and history data of the last infusion.

Operating conditions: >
Ambient temperature: +5~+40C
Relative humidity (RH): 30 %~75 %
Power supply:
AC: 100V~245V\50 +/-1Hz
Battery: 14.4V battery can use for more than three hours after charged for 10 hours.
Atmospheric pressure: 860~1060hPa
Dimension (mm): 336(L)*153(W)*132(H)
Weight: 2.5kg
Safety Classification: Class II and Type
 

3-part and 2-part syringe
Luer slip and luer lock
Size: 0.5-100ml
Normal type and insulin syringe
Packing: PE and blister
Sterilization methods: E.O.
CEO123 and ISO13485 certified