For the implementation of the hospital operating room surgery using various parts of the body.
In addition to the product of all the functions of an integrated operating table, there are unique advantages: leg plate can be removable and outreach. Convenient, very suitable for urology surgery; table translation significantly. Taiwan to adopt the entire panel surface plate made of high-intensity light, the ray examination is very convenient; backplane can be folded on the table to overcome the shortcomings of a significant shift operating table
Lenght:2000mm
Max Height : 1000mm
MIin Height :750mm
Reversed Trendelenburg:≥22°
Trendelenburg :≥22°
Lateral Tilt :≥15°
Head Section Raised form the Horiyontal :≥ 45°
Head Section Loewered form the Horiyontal:≥ 90°
Back Section Raised from the Horiyontal :≥ 45°
Back Section Loewered from the Horiyontal:≥15°
Leg Section Loewered from the Horiyontal:≥90°
Leg Section Opened :≥90°
Kidney BRIDGE Elevation:≥120mm
Supply: (AC)220±10%,50Hz
Volume: lenghe1405*width725*height885mm

The device minimum height from 500mm~800mm,can be adjusted by using touch micro-controller.It high degree of automation and low noise and low noise and reliabilty, easy to disassemble and clean
Min.height for tabletop to floor ≤500mm
Tabletop up and down range ≥300mm
Head rest up and down range ≥180mm
Tabletop length ≥2000mm
Tabletop width ≥520mm

Comperhensive manipulation operating table with Electric lift
Size of mesa :1990mm×480mm
Angle regulation range of front plate
Upper folder: ≥35°Disengage:≥40° Disengage able
Angle regulation range of leg plate
Lower folder:≥90 ° Disengage able
Angle regulation range of back plate
Upper folder: ≥42 ° Lower folder:≥5°
Angle reggulation range of mesa
Front rake ≥ 20° Back rake≥15°
Left rake≥ 15 ° Right rake≥15°
Lift of waist section :≥80mm
The overhead height of mesa ≤680mm
Lift of table top:≥200mm
Rate load weight of mesa : 135kg

Electrical Operating Table DT12-B
DT12-B serves as a multi-purpose operationtable, suitable for thoracic abdominal surgery cerbrial surgery, ENT, gynecology and obstertriocs as well as urology surgery.

Summary of features and properties:
1. Integrated hydraulic. System ensures the reliablility of the table.
2. Superior stainless steel housing for the basement and support system of the table makes cleaning and sterilization a easy matter. Ergonomic design provides the table with a clearcut. All matress are cast and made from polyster rubber.
3. The back section of the table is movable, on which an elevator can be fit for the operation on kidney or gall-bladder.

4. The surfaces of the table are made of plexiglass, By putting the X-ray film container between the upper and bottom deck of the table, radiographic examination can be carried out without moving the patient.
5. All the clamps for fixing the accessories are detachable and easy to use.
6. With the head rest and the double-sheet arm rest, which is optional accessories, the cerebral surgery and lateral surgery are convenient.

Specification:
Table board: 2070x500mm(LxW)
Height of table: Minium of height 650mm,
Adjustment range 0 to 300mm
The lateral adjustment: -19degree to +19degree
Trendlendenburg adjustment: -29degreeto +29degree
Back section: Up to +75degree
Head section: -90degree to 45degree, detachable
Leg section: Bifurcated type,

Abductable up to 180(90either side) down position up to 90 detachable.
Foot section level with or vertical to table board, detachable.
Elevator range of kindney bridge: >120mm
Power Supply: 220V, 50Hz
Electric motor: Singel phase, defferential pace, 370W 1400rpm
Optional accessories
Double deck arm rest
Neurosurgery head rest

Electrical Operating Table DT12-B
DT12-B serves as a multi-purpose operationtable, suitable for thoracic abdominal surgery cerbrial surgery, ENT, gynecology and obstertriocs as well as urology surgery.

Summary of features and properties:
1. Integrated hydraulic. System ensures the reliablility of the table.
2. Superior stainless steel housing for the basement and support system of the table makes cleaning and sterilization a easy matter. Ergonomic design provides the table with a clearcut. All matress are cast and made from polyster rubber.
3. The back section of the table is movable, on which an elevator can be fit for the operation on kidney or gall-bladder.

4. The surfaces of the table are made of plexiglass, By putting the X-ray film container between the upper and bottom deck of the table, radiographic examination can be carried out without moving the patient.
5. All the clamps for fixing the accessories are detachable and easy to use.
6. With the head rest and the double-sheet arm rest, which is optional accessories, the cerebral surgery and lateral surgery are convenient.

Specification:
Table board: 2070x500mm(LxW)
Height of table: Minium of height 650mm,
Adjustment range 0 to 300mm
The lateral adjustment: -19degree to +19degree
Trendlendenburg adjustment: -29degreeto +29degree
Back section: Up to +75degree
Head section: -90degree to 45degree, detachable
Leg section: Bifurcated type,

Abductable up to 180(90either side) down position up to 90 detachable.
Foot section level with or vertical to table board, detachable.
Elevator range of kindney bridge: >120mm
Power Supply: 220V, 50Hz
Electric motor: Singel phase, defferential pace, 370W 1400rpm
Optional accessories
Double deck arm rest
Neurosurgery head rest

 KL-FS·II electric operating table adopts famous imported brand electric machine for controlling. In order to realize the alterability of the operating table's different angle , the machine adjusts the turning angle of the all-in-one table.Gynaecology operating table can be controlled by two independent methods, hand or foot. Hand-holding remote controller can display operating status and have self-locking function without trigger by error. FS·II type has memory and restoring function. Therefore, the machine provides relaxed and professional treatment position for gynecological diagnosing , ultrasonic flaw detection, Induced abortion and some general gynecological surgery.

 KL-FS·II electric operating table adopts famous imported brand electric machine for controlling. In order to realize the alterability of the operating table's different angle , the machine adjusts the turning angle of the all-in-one table.Gynaecology operating table can be controlled by two independent methods, hand or foot. Hand-holding remote controller can display operating status and have self-locking function without trigger by error. FS·II type has memory and restoring function. Therefore, the machine provides relaxed and professional treatment position for gynecological diagnosing , ultrasonic flaw detection, Induced abortion and some general gynecological surgery.

KL-CB·II obstetric beds are designed for various stages of care for patients .They can be used in labor, delivery and postpartum recovery period .The chair posture can be easily converted to provide adequate comfort for the lying-in women .The lying-in women don't need to be moved from one bed to another thanks to the beds' perfect structure. The adjustment of the height and inclining and the angle of the backboard are all driven by the famous imported electric machinery.KL-CB·II It possesses Ultra-low-position function.

KL-CB·II obstetric beds are designed for various stages of care for patients .They can be used in labor, delivery and postpartum recovery period .The chair posture can be easily converted to provide adequate comfort for the lying-in women .The lying-in women don't need to be moved from one bed to another thanks to the beds' perfect structure. The adjustment of the height and inclining and the angle of the backboard are all driven by the famous imported electric machinery.KL-CB·II It possesses Ultra-low-position function.

Input power:500VA