The AX-88 Laser Pin is designed to assist fabricating accurate model and dies for use in the fabrication of dental restorations. It features high rotational speed, low noise, high precision and easy operations. It is use to accurately drill parallel holes into the underside of the model. This machine has a laser positioning system, the work table and the main axis match precisely which ensure the quality of the drilling. The depth of drilling can be adjusted by a rotary switch, the minimum adjustable height is 0.15mm. The travel switch enables the motor to be turned on after the work table is being pressed, and stop after the work table is being released, this will protect the motor and prolong its lifespan.

Voltage:220V/50Hz±10%
Power:150W
Motor rotational speed:2800rpm
Drilling depth:0 -12mm (can be adjusted)
Dimensions: 18×18×39cm
Package size: 25×25×47cm
Weight:17kg

The AX-JT4 Dental Workstation is a necessary tool for laboratories. It is made of parkerized cold-rolled sheet and is painted electrostatically with imported paints. The table board is made of high density fireproof material which has been parkerized. It is also equipped with a cold light lamp, a stainless steel working platform, two elbow supports, an auto-retrieve air gun, a vacuum device, storage drawers etc.

Voltage: 220V/50Hz±10%
Power: 800W
Dimensions: 120×60×109cm
Package size: 127×71×122cm
Weight:120kg

Fout color choices(black,red,white,blue),the actual colors depends on the products.

The AX-JT3 Dental Workstation is a necessary tool for laboratories. It is made of parkerized cold-rolled sheet and is painted electrostatically with imported paints. The table board is made of high density fireproof material which has been parkerized. It is also equipped with a cold light lamp, a stainless steel working platform, two elbow supports, an auto-retrieve air gun, a vacuum device, storage drawers etc.

Voltage: 220V/50Hz±10%
Power: 800W
Dimensions: 120×60×81cm
Package size: 127×71×97cm
Weight:110kg

The AX-JT6 Dental Workstation is a necessary tool for laboratories. It is made of parkerized cold-rolled sheet and is painted electrostatically with imported paints. The table board is made of high density fireproof material which has been parkerized. It is also equipped with a cold light lamp, a stainless steel working platform, two elbow supports, an auto-retrieve air gun, a vacuum device, storage drawers etc.The height of this height adjustable Laboratory Table can be set according to the needs of the users.

Power supply voltage:220V/50Hz±10%
Power: 800W (Standard)
Dimensions:160×60×85cm
Package size:167×71×100cm
Weight:140kg

The EM-LT1 Dental Workstation is a necessary tool for laboratories. It is made of parkerized cold-rolled sheet and is painted electrostatically with imported paints. The table board is made of high density fireproof material which has been parkerized. It is also equipped with a cold light lamp, a stainless steel working platform, two elbow supports, an auto-retrieve air gun, a vacuum device, storage drawers etc.

Voltage: 220V/50Hz±10%
Power: 800W
Dimensions: 120×60×85cm
Package size: 127×71×97cm
Weight:120kg

The AX-JT7 Dental Workstation is a necessary tool for laboratories. It is made of parkerized cold-rolled sheet and is painted electrostatically with imported paints. The table board is made of high density fireproof material which has been parkerized. It is also equipped with a cold light lamp, a stainless steel working platform, two elbow supports, an auto-retrieve air gun, a vacuum device, storage drawers etc.The height of this height adjustable Laboratory Table can be set according to the needs of the users.

Power supply voltage:220V/50Hz±10%
Power: 800W (Standard)
Dimensions:120×60×85cm
Package size:127×71×102cm
Weight:120kg

The Automatic Polymerization Forming Unit is an newly developed equipment that has entered dental laboratories and changing the working environment, making it much more easier for dental technicians to do their jobs. This machine is a user-friendly machine. No boiling and pressing is needed, it featured: automatic pressure, automatic heating, high efficiency and environmental friendly, which makes it superier comparing to the traditional boiling method.
It is a high-tech equipment with easy operations. Simply put flasks which are ready on its platform, screw it down with the handle, after that remove the flask and remove unecessary materials on the flask. Then put the flask on the platform again and turn on the power, turn to the automatic mode, adjust positions (upper and lower position, two flasks for each position), set the timer to 20-25 minutes. After about 40 minutes the pressure, heating, keep warm and pressure release processes will be done, and the dentures will be ready. Low price, high efficiency, low power consumption are its main features.

Advantages:

This machine is safe to use, no need to be guarded by users. Users can just leave it working unguarded after adjusting the programs.

• Low power consumption. Its power rating is 600W; 900W which enables the machines to consume less water, electric and gas energy.
• Easy operations for dental laboratory technicians. The heating time of 20-25 minutes are need for making both big and small dentures.
• This machine can be looked as two separate machine: the dental press, which is used to press the dentures and remove the unnecessary materials; and polymeriation unit, which is used to polymerize the denture under appropriate temperatures to make it turn solid to make the dentures more durable.

 

Power supply voltage: 220V/50Hz±10%
Rated Power: 900W
Rated pressure:2000kg--3500kg
Motor power:6W
Dimensions:75×31×19cm
Weight: 15kg

The AX-ZL5 Medium Frequency Vacuum Casting Machine is a high-end equipment in dental laboratories. It is upgraded from the older medium and high frequency casting machines. This unique machine is designed and developed with our own patented technologies. It is now the only patented vacuum casting machine in China . The advantages of this machine are: small size, light weight, easy operations, no radiation, less electricity consumption and the machine can be used on electric outlets in general homes. As the vacuum and argon pumping processes are being done in an oxygen-free state, the integrity and the success rates are much higher. There are no holes, bubbles in the castings and they will not be oxidized, as a result improving the hardness and density of the workpieces.

Power supply voltage:220V/50Hz±10
Power:2500W
Centrifugal rotational speed:500rpm
Maximum melting amount :50g (cobalt-chrome alloy)
Melting duration:30g≤185s
Casting radius:21cm
Casting method:Horizontal centrifugal casting
Cooling method:Air cooled
Motor power:370W
Vacuum pump:220V/50Hz,
120W,1440rpm
Working pressure:-0.08~-0.09MPa
Vacuum duration:≤1min
Dimensions:68×54×91cm
Package size:80×65×109cm
Weight:120Kg

The EM-DC1 Die Cutting Machine is used in dental labs, it is the ideal equipment for cutting dental models. This machine can replace the traditional handsaws. It features high speed, low noise, stable rotation, and angle-adjustable working platform. The highly reinforced tungsten saw blade, which is imported from Germany(DFS), will provide excellent cutting results.

Voltage:220V/50Hz±10%
Power:90W
Saw blade:Tungsten carbide saw blade
Rotational speed: 2800rpm
Saw blade thickness: 0.2mm
Dimensions: 47 ×37×34cm
Package size:53×43×40cm
Weight:20kg

The EM-BX1 Dust Cabinet features wide operating view, strong cold lighting system, wide hand inlets, dust collection system, and the optional wooden arm rests. With this cabinet, dental technicians no longer have to do the irritating desk top cleaning work, and it can get rid of dusts, fragments and gas, which greatly improves working quality and working environment of dental technicians.

Voltage:220V/50Hz±10%
Power:<8W
Optional part: Dust Collector
Arm Rest:Removable
Dimensions: 39 ×34×26cm
Package size:44×39×31cm
Weight:15kg