Air mode and baby mode controlled by micro-computer;

Humidity control system and Oxygen concentration control system;

Set temperature, air temperature, baby temperature, humidity and oxygen are displayed separately;

>37 temperature set function;

Failure alarm indication;

Embedded integrated sensor box;

integrated water reservoir in the shape of drawer;

Double wall hood, automatic air circulation device;

Inclination of bassinet is adjustable;

RS-232 connector;

Weighing system and Monitor shelf is optional.

Air mode and baby mode controlled by micro-computer;

The information can be stored, consulted and indicated by the LCD display screen;

Humidity and oxygen concentration display and servo control;

>37 temperature set function;

Double wall hood, air circulation system in the way of air outlet from front and back;

X-ray cassette under the bassinet;

Embedded integrated sensor module, integrated water reservoir in the shape of drawer;

Inclination of bassinet is adjustable;

The height of whole unit can be adjusted;

Failure alarm indication;

RS-232 connector;

Weighing system and Monitor shelf is optional.

Air mode and baby mode controlled by micro-computer;

Humidity concentration display system;

Set temperature, air temperature, baby temperature, humidity concentration are displayed separately;

>37 temperature set function;

Failure alarm indication;

Embedded integrated sensor box;

Double wall hood, automatic air circulation device;

Inclination of bassinet is adjustable;

RS-232 connector;

Weighing system and Monitor shelf is optional.

separately;

Natural air flow humidity;

Inclination of bassinet is adjustable;

Failure alarm indication;

RS-232 connector;

Weighing system and Monitor shelf is optional.

Air mode and baby mode controlled by micro-computer;

Set temperature, air temperature, baby temperature are displayed separately;

Natural air flow humidity;

Inclination of bassinet is adjustable;

Failure alarm indication;

RS-232 connector

Weighing system and Monitor shelf is optional.

Based on YP-90, YP-90B is configured with fixed Neonate Bilirubin Phototherapy Equipment model: XHZ-90 (with blue fluorescence lamps)

Based on YP-90, YP-90B is configured with fixed Neonate Bilirubin Phototherapy Equipment model: XHZ-90L (with LED bulb) as optional;

Weighing system and Monitor shelf is optional.

ased on YP-90A, YP-90AB is configured with fixed Neonate Bilirubin Phototherapy Equipment model: XHZ-90 (with blue fluorescence lamps)

Based on YP-90A, YP-90AB is configured with fixed Neonate Bilirubin Phototherapy Equipment model: XHZ-90L (with LED bulb) as optional;

Weighing system and Monitor shelf is optional.

STANDARD COMPOSITION 
●Servo Control Mode:air temperature
● Instant Parameter Display: set temp, skin temp, heat power rate;
● Audible/Visual Alarms: temp deviation, sensor failure, power failure, temp override;
● Tilting Bed with Rotary Radiant Head
● X-ray Cassette Tray under infant bed, examination light of high illuminance;
● Use anti-blast quartz infrared tube as radiant heating source.
 

STANDARD COMPOSITION 
●Servo Control Mode:air temperature
● Instant Parameter Display: set temp, skin temp, heat power rate;
● Audible/Visual Alarms: temp deviation, sensor failure, power failure, temp override;
● Tilting Bed with Rotary Radiant Head
● X-ray Cassette Tray under infant bed, examination light of high illuminance;
● Use anti-blast quartz infrared tube as radiant heating source.
 

SPECIFICATIONS:
Model: B-2000
POWER
Power Requirements: AC220V 10%, 50Hz 2%
Power Input: ≤450VA
Refer to IEC60601-1, this equipment belongs to Class I, Type B. Its operation is Continuous.
ALARM
Power Alarm
Power Failure: Activates if primary power to the Incubator
Fails or the power wire is accidentally
Disconnected from the wall receptacle.

Fan Alarm
Fan Failure: Activates if Fan motor malfunctions. Sensor Alarm
Air Sensor Failure: Air Sensor malfunction, refer unit to service.
Sensor Out of Position: Activated when Sensor is not in correct position To perform calibration or continue operation.
Skin Sensor Disconnected: Activated during Skin Control Mode when Skin Sensor is disconnected from Temperature Controller. Skin Sensor Failure: Activated when Skin Sensor malfunctions.
Deviation Alarm High Air Temperature: Activated if displayed Air Temperature is 1.5 centigrade above set point
Low Air Temperature: Activated if displayed Air Temperature 2.5centigrade below set point

Skin Temperature: Activated if displayed Skin Temperature is 1.0 centigrade above set point
Low Skin Temperature: Activated if displayed Skin Temperature is 1.0Over Temperature Alarm
Over Air Temperature: Activated when displayed Air TemperatureWas approach 38centigrade for set temperature ≤37centigrade, Or approach 40centigrade for set temperature >37centigrade in Air Mode.

Over Skin Temperature: Activated when displayed Skin Temperature was approach 38centigrade for set temperature ≤37centigrade, Or approach 39centigrade for set temperature >37centigrade in Skin Mode. System Alarm
System Failure: Activated if Temperature Control System malfunctions.

TEMPERATURE CONTROLRANGEAND CORRELATIVE SPECIFICATIONS
Air Temperature: 20centigrade ~37centigrade, for set temperature ≤37centigrade
37centigrade ~39centigrade, for set temperature >37centigrade
Skin Temperature: 20centigrade ~37centigrade, for set temperature ≤37centigrade
37centigrade~38centigrade, for set temperature >37centigrade
Temperature Rise Time: ≤30min
Temperature Variability: 0.5centigrade
Temperature Uniformity: ≤ 1 centigrade
Skin Sensor Precision: ≤0.3centigrade
ENVIRONMENT REQUIREMENT

Environment Temperature
Operation Temperature Range+20centigrade ~+30centigrade
Store Temperature Range -40centigrade ~+70centigrade
Environment Humidity
Operation Humidity Range: 30%~75%
Store Humidity Range: ≤80%
Atmospheric Pressure Range: 500hPa~1060hPa
OTHER SPECIFICATION
Noise Level Within Hood Environment ≤55dB(Environment noise below 45dB Carbon Dioxide (CO2) Level within the Hood Less than 0.5% when a mixture of CO2

In air is delivered at 750ml/min
At point 10cm above the center of the mattress.
Air Velocit y Over Mattress less than: 0.35m/s
Infant Bed Max Load: 10kg
Transfusion Shelf Max Load: 2kg
Shelf Max Load:
Cabinet Max Load: 6kg