The EM-LT2 Dental Workstation is a necessary tool for laboratories. It is made of parkerized cold-rolled sheet and is painted electrostatically with imported paints. The table board is made of high density fireproof material which has been parkerized. It is also equipped with a cold light lamp, a stainless steel working platform, two elbow supports, an auto-retrieve air gun, a vacuum device, storage drawers etc.
Voltage: 220V/50Hz±10% Power:1600W Dimensions: 160×60×81cmPackage size: 167×71×101cmWeight:140kg
The operator stool be use for dental technician in dental laboratory or dental clinic.
Package size:27×23×54cmWeight:120kg
The Dental Press and Polymerization Unit is a combination of dental press and polymerization unit. It skips the complicated working steps and makes working experience much more easier. With this machine, clamps for polymerization unit and dental press will no long be needed. This durable machine will not have problem if used with proper care, therefore the cost of manufacturing is lowered.
Voltage: 220V/50Hz±10% Rated Power: 600W Rated pressure:2000kg--3500kgMotor power:6W Dimensions:28×14×40cmWeight: 10kg
The AX-D1 Electrolytic Polisher is used in restorative dentistry, it can be used to polish objects that are polished by sandblasters such as cobalt-chrome alloys or objects made of stainless steel: denture frames, crowns and bridges and clasps. This machine can also be used to polish workpieces that are made of special materials. It has a delicate design and beautiful shape, its small size makes it a compact device. The two cylindrical electrolytic baths can work at the same time to improve its efficiency, and it can polish objects from all directions. The electrolytic baths are its cathode, and the anode is the clip which is used to hang castings. The timer controls the duration of electrolytic polishing, and the current can be controlled during the polishing process.
Voltage:220V/50Hz±10% Power:150W Timer:0-15min Working current:10A Dimensions:30×26×23cmPackage size:37×33×30cmWeight:11.5kg
The AX-4-10A Intelligent Burnout Furnace is used in dentistry, it is updated from manual burnout furnaces. Most traditional burnout furnaces have a one-level temperature control, which are not accurate, and the speed and rate of the temperature increase and the temperature preservation time cannot be controlled. However, this intelligent burnout furnace has a multi-level temperature control, thus it does not need to be operated manually. The temperature increases and preserves automatically, and the temperature and time control are very accurate.The time relay function enables the machine to started after 1-96 hours (4 days).
Voltage:220V/50Hz±10% Power: 4000W Maximum temperature:1200 Chamber size:30×20×12cmDimensions:75×46×71cmPackage size:83×54×88cmWeight:120kg
This machine is for polishing and burnishing castings. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operations. The motor and protective device are embedded in this machine to make it easier to carry.
Voltage:220V/50Hz ±10% Power :364WSuction pipe diameter:4cm Motor rotational speed:3000rpmOptional part: Dust Collector Dimensions :60×41×46cmPackage size:68×50×53cmWeight:35.5kg
AX-AWM1 Dental Argon-arc Welding System is a necessary tool used in dental laboratory. This equipment has the same function and lower cost compared with the laser welding machine. Five commonly-used model to weld different materials such as Co-Cr alloy, gold-Co-Cr alloy, ferroferrite and other metal materials used in orthodontics are available.
Besides its small size, safe, stable and noiseless features, this machine is also easy to operate and neednt maintenance. It doesnt take too much room, on the contrary, a standard worktable is enough. Thanks to the free adjustment of power and pulse time the welding point can be accurately positioned. The machine is equipped with pancratic lens and double-eye microscope. The LCD electronic shutter can effectively protect the users eyes. If no operation for 5 fives, the power and the pulse time will be automatically adjusted into Ortho model in order to avoid damaging the welding material.
Voltage:220V/50Hz±10%Max. input current:4.5ADegree of protection:IP21Gas supply pressure:≥0.1MpaWelding voltage:40VWelding current:5A∼600AWelding time:3ms∼30msMax. welding frequency:1HzMax. argon consumption:5L/min
The AX-SCA Steam cleaner is an important piece of equipment in dental laboratories. It offers a quick, efficient way of cleaning porcelain, metal, dentures, and casts during the prosthesis-fabrication process. This machine is equipped with imported controlling devices, which can automatically protect itself from lack of water, over-pressure and overheat. It features large water tank, strong heating power, quick steam generating power, high efficiency, strong and steady output pressure, and strong power. The boiler is reliable and safe which has all the required safety certificates.
Voltage:220V/50Hz±10% Heating power:1600W Maximum pressure: 4.5Bar (default) Working pressure: 4Bar Water tank capacity:5.5L Dimensions:38×38×54cmPackage size:45×44×59cmWeight:24kg
