The monitor is a non-invasive, handheld patient monitor. It operates only on Common 1.5V AA alkaline or rechargeable battery power. It is compact, small, light, and easy for learning and handling. It is suitable for monitoring adult, pediatric, infant and neonate patients. It is widely used in the hospitals operation room, ICU, clinic section office, out-patient department, sickroom, emergency treatment, and the recovery and health care organizations, or in the family nursing and in the process of transporting patients. It can also apply to animals selectively.
Parameters measured by the monitor include: arterial oxygen saturation (SpO2), pulse rate (PR), pulse strength. The monitor measures these parameters through a SpO2 sensor and displays them on the LED screen after certain further processing.
The monitor is operated and controlled by the buttons on the front panel. It adopts LED in displaying measurements and in supplementary status indication.
The monitor has the following functions:
Measuring: Display of SpO2, PR and pulse strength.
Prompting: Battery capacity.
Alarm: Judgment of exceeding the limits, Audio and visual alarm.
Power saving: Automatic shutdown when no monitoring.
H.S.Code: 90189090
Net Weight: 0.13kg
Gross Weight: 0.8kg
Package Size: 210x160x70mm
Color: Yellow or Blue can be selected
Standard accessories: one SpO2 adult finger probe
Technical specification General
Monitoring Parameters:SpO2PRPulse strength
Signal socketsSpO2 socket
Display screen           
Type:Red LED
Display area:56mm×36mm
Size:120mm×63mm×32mm
Weight:125gnot include sensor and battery 
Features
Audio and visual alarm:  The speaker sounds the alarm and the parameters measurement flashes on the screen.
Prompting: Indicator of battery capacity.
Power saving: The monitor will automatic shut down when no monitoring for 3 minutes.
Electrical specifications
Working Voltage:D.C. 2.8V∼D.C. 5.4V.
Battery 
Type:Three common 1.5V AA alkaline or rechargeable batteries
Run Time:7-hour continuous operation with a new battery (environment
temperature is 25)
Environment
Temperature
Operation:0 ~ 45 (°C)  
Transportation and storage:-20 ~ 60 (°C)
Humidity
Operation:15% - 95 %( noncondensing)  
Transportation and storage:10% - 95 % (noncondensing)  
Altitude
Operation:86 KPa ~106 KPa
Transportation and storage:50KPa~106 KPa
Parameter Specifications
SpO2
Patient:Adult, pediatric, infant, neonate, animal
Range:35 - 99%
Resolution:1 %
Accuracy:±2 % (70% - 99%), unspecified (0% - 69%)
PR
Range:30~250bpm
Resolution:1bpm
Accuracy:±2bpm

Product Name:Fingertip Pulse Oximeter
Item No.: 07400014
Description:
Feature:

Display Format: 64k color LED 
Display Mode :Two Directions
Back light: OLED
SPO2:35-99%
Pulse Ratio:30-255 BPM
Pleth Wave: OLED Graphic Display
Battery Voltage Low Indication: OLED Bar Graph.
Power Requirements: Two AA size 1.5V Alkali Battery;
Power Consumption: Less than 60 mA.
Resolution: 1% for SPO2 and 1 BPM for Pulse Ratio.
Measurement Accuracy: ±2% in stage of 70%-99% for SPO2
Unspecified in stage of 35-69% for SPO2
±2BPM or ±2% (Select Larger)for Pulse Ratio.
Measurement Performance in Low Perfusion: SPO2  and  pulse rate #118alue can be shown correctly when pulse-filling ratio is 0.4%. 
Interference  Resistance  Capacity  against  Ambient Light :  Deviation  is  smaller  than  ±1%
It is equipped with a function switch, through which the Oximeter can be automatically powered off when no finger is in the Oximeter more than 4 seconds.

 

Product descriptionThe Fingertip Oximeter is applicable to hospital, home, community medical center and so on. It can monitor pulse oxygen saturation(SpO2) and pulse rate through patient's finger.
Features:
Light in weight and small in size
Easy to carry and easy to use with one-key operation
Can monitor SpO2 and pulse rate
High accuracy and repetition
Two AAA batteries are required, and the operation can be working with low power consumption
Automatic power-off if without signal longer for 8 seconds
The continuous working time is 100 hours
There are 4models of Fingertip Oximeter, which are ET-60A, ET-60B,ET-60C and ET-60D. Their differences are described as following tables: