Infusion pump & syringe pump top manufacturer, welcome to contact Ms Sunny for further.
1> Flow rate: 1ml/h~1000ml/h or 1 drops/min ~250 drops/min.
2> 2 work modes: Liquid volume mode and drops mode, ml/h or drops/min.
3> 3 levels of occlusion value: Adjustable from high, meddle and low.
4> Free-flow protection: Prevent any free flow or leakage.
5> Reasonable and unique structure and design prevent bringing any air bubble and air bubble alarm error.
6> Drop detector: Automatically demarcate the accuracy of any IV set, accordingly improve the infusion accuracy.
7> Can use any standard of IV set, automatically remember this IV line type.
8> Rechargable battery.
9> Visible and audible alarms for any malfunction, air-on-line, operation error, unnormal flow rate and so on.

Top manufacturer of infusion pump, welcome to contact Ms Sunny for further.
Infusion pump XB-1000

1> Flow rate: 1ml/h~1000ml/h or 1 drops/min ~250 drops/min.
2> 2 work modes: Liquid volume mode and drips mode, ml/h or drops/min.
3> 3 levels of occlusion value: Adjustable from high, meddle and low.
4> Free-flow Fprotection: Prevent any free flow or leakage.
5> Reasonable and unique structure and design prevent bringing any air bubble and air bubble alarm error.
6> Drop detector: Automatically demarcate the accuracy of any IV set, accordingly improve the infusion accuracy.
7> Can use any standard of IV set, automatically remember this IV line type.
8> Rechargable battery.
9> Visble and audible alarms for any malfunction, air-on-line, operation error, unnormal flow rate and so on.
 

Introduction:
XB-800 Syringe Pump syringe pump is routine use equipment for hospital emergent treatment, cure and nursing. It adopts the new technology of microcomputer with compact structure. It has multi-intelligent alarm functions, could use disposable syringe of many kinds of, strong functions and use convenient. It is especially suitable for exact micro infusion or quick infusion for long time. This product is use for push the syringe to control the liquid amount into patient body for medical institution.
1. Work Condition
1.1 Ambient temperature: +5c---- 40c
1.2 Relative humidity: 20%~90%
1.3 Power supply: AC220V 22V, 50Hz
1.4 Built-in batteries: 12V, 1.2h/A (Undervoltage value ≤ 10.5V)
It can be used for 2 hours continuously after 24 hours full charged.
1.5 Atmospheric Pressure: 860hpa~1060hpa
1.6 Storage Temperature: -40c~+55c
2. Basic Parameters
2.1 Dimensions (mm): 320 (L)/145(W)/120(H)
2.2 Weight: Approximately 3 kg
2.3 Power Consumption: ≤19.8VA
2.4 Compatible Syringe Size: 10ml, 20ml, 30ml, 50ml Disposable
2.5 Infusion Flow Selection: 0.1~199.9ml/h, original value is 0.1ml/h
2.6 Infusion Range: 0.1~999.9ml, original value is 0.1ml
2.7 Occlusion Pressure: 40K~70K pa
2.8 Flow Rate Precision: 5%(0.1ml/h≤Flow Rate≤50ml/h)
/3%(50ml/h≤Flow Rate≤199.9ml/h)
2.9 Alarm: Self-Test, Occlusion, Nearly Finish, Finish, Low battery,
Standby, Move
2.10 Functions: Syringe's Type Test, Transfusion amount display, Flow rate display, Power display, Auto-Alarm, KVO function

After power off, the electrical memory function keeps for five years
(Only effective for setting content)
 

Vet infusion pumps, vet syringe pumps, vet anaesthesia pump, syringes, infusion sets and so on vet use medical equipments; Human use infusion pump, human use syringe pump and so on medical equipments in China, our head office is located in Hunan province, China, and has branches in Shenzhen and Changsha, have our own R&D dept. And sales teams, we welcome OEM, ODM and custom-tailor according to your actual requirements.

XB-900 Vet Infusion Pump

CHARACTERISTICS:
1>2 control ways: Can be used in either drop counting control way or volumetric control way ml/h or drops/min
2>High speed: 1ml/h~1000ml/h or 1 drop/min ~250 drop/min.
3>3 levels of occlusion value: High, middle and low.
4>Hard based free-flow protection: Avoid any free flow or leakage, prevent any danger to patients.
5>Drops detector: Can detect the drops infused, automatically detect the IV line type and ensure the accuracy for any IV line.
6>Applicable IV Sets: Any standard IV sets.
7>Rechargeable internal battery.
8>Visible and audible alarm: When any malfunction, error, air-on-line, occlusion, error flow rate and so on.
9>KVO function: After infusion is complete, the pump automatically switches to the smallest flow to prevent creating the thrombus.
10>Bolus function: When during infusion, press a key to infuse at the rate of 400ml/h.
 

CHARACTERISTICS
Compatible with  IV sets of any Brand with high accuracy.
Automatical calibration for IV sets of any Brand.
Three working modes: Drop counting control,Rate control  and time control mode.
8 Hours internal battery life in high capacity.
Has a unique color LCD and an internal battery with a high capability.
Swith between ml/h and drops/min freely.
Three levels of alarm volume: high, medium and low.
Three levels of Occlusion pressure: high, medium and low.
KVO function: When finish the total volume of an infusion,   the pump will alarm and enter KVO state.  

SPECIFICATIONS
Controls:
Drop counting and adjusting the delivery rate automatically
Pump Type: Peristaltic finger
Applicable IV Sets:
Compatible with IV sets of any standard(including lucifugal IV sets)
Accuracy:
≤25drop/min:±2%, >25drop/min:±3% (With the drop counting control mode)
±5% (With the rate control mode after the correct calibration)
Delivery Rate Range:
1～400drop/min(1drop/min step)
1.0ml/h～1200ml/h (1.0ml/h～99.9ml/h, 0.1ml/h step; >99.9ml/h, 1ml/h step)
Delivery Time Range: 1min～1999min (1 min step)
Volume Limit Range: 0～9999ml (1 ml step)
Total Volume Range: 1～9999ml (1 ml step)

Rapid injection: 600ml/h
KVO Rate:

600ml/h
KVO Rate:
W hen the delivery rate≤10ml/h, KVO is  1 ml/h .   O therwise KVO is 3ml/h.
Alarms:
Air-in-line, Infusion complete when limited volume has been set, Empty container, Occlusion, Door is open, waitting time Over, No drop been detected, Operational errors, Low battery, other device failures.
Power Supply:
AC power supply: AC 100 to 240V±10%，50/60Hz；
Internal LI Battery: 11.1V, 2000mAh. 8 Hours of continous operation on a new fully charged battery with the rate of 20 drops/min.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type BF
Dimensions: 130mm(L)× 200mm(W) × 230mm(H)
Net Weight: Approximately. 2.5kg
Operating Conditions: Ambient temperature: 5 to 40℃　Relative humidity: 20 to 90%
Storage Conditions: Ambient temperature: -10 to 55℃　Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual

CHARACTERISTICS
Compatible with  IV sets of any Brand with high accuracy.
Automatical calibration for IV sets of any Brand.
Three working modes: Drop counting control,Rate control  and time control mode.
8 Hours internal battery life in high capacity.
Has a unique color LCD and an internal battery with a high capability.
Swith between ml/h and drops/min freely.
Three levels of alarm volume: high, medium and low.
Three levels of Occlusion pressure: high, medium and low.
KVO function: When finish the total volume of an infusion,   the pump will alarm and enter KVO state.  

SPECIFICATIONS
Controls:
Drop counting and adjusting the delivery rate automatically
Pump Type: Peristaltic finger
Applicable IV Sets:
Compatible with IV sets of any standard(including lucifugal IV sets)
Accuracy:
≤25drop/min:±2%, >25drop/min:±3% (With the drop counting control mode)
±5% (With the rate control mode after the correct calibration)
Delivery Rate Range:
1～400drop/min(1drop/min step)
1.0ml/h～1200ml/h (1.0ml/h～99.9ml/h, 0.1ml/h step; >99.9ml/h, 1ml/h step)
Delivery Time Range: 1min～1999min (1 min step)
Volume Limit Range: 0～9999ml (1 ml step)
Total Volume Range: 1～9999ml (1 ml step)

Rapid injection: 600ml/h
KVO Rate:

600ml/h
KVO Rate:
W hen the delivery rate≤10ml/h, KVO is  1 ml/h .   O therwise KVO is 3ml/h.
Alarms:
Air-in-line, Infusion complete when limited volume has been set, Empty container, Occlusion, Door is open, waitting time Over, No drop been detected, Operational errors, Low battery, other device failures.
Power Supply:
AC power supply: AC 100 to 240V±10%，50/60Hz；
Internal LI Battery: 11.1V, 2000mAh. 8 Hours of continous operation on a new fully charged battery with the rate of 20 drops/min.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type BF
Dimensions: 130mm(L)× 200mm(W) × 230mm(H)
Net Weight: Approximately. 2.5kg
Operating Conditions: Ambient temperature: 5 to 40℃　Relative humidity: 20 to 90%
Storage Conditions: Ambient temperature: -10 to 55℃　Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual