Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; the infant bed can be pulled out from the side door

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: 600VA
Air Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: ≤45min
Noise level: ≤55dBA

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the temperature control ≤38
Deviation alarm:±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight72Kg
Net Weight60Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

Characteristic:

Water-jacket heating mode. Temperature is even in the working chamber. if power failure, the chamber can keep constant temperature for longer.

Technical Datas:

Main voltage:  220V.50Hz

Temperature Control Range:    RT+5~65

Temperature Fluctuation:      ± 0.5

Consumption Power:         530W

Dimensions of the working chamber:    350 x 350 x 410mm

Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: ≤600VA
Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: < 45 min
Noise level: ≤55dBA
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer0~9999 hour 59 minutes
Accumulative error of blue light timing≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38
Deviation alarm: air temperature control ±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight83Kg
Net Weight69Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: ≤600VA
Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: < 45 min
Noise level: ≤55dBA
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer0~9999 hour 59 minutes
Accumulative error of blue light timing≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38
Deviation alarm: air temperature control ±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight83Kg
Net Weight69Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: ≤600VA
Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: < 45 min
Noise level: ≤55dBA
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer0~9999 hour 59 minutes
Accumulative error of blue light timing≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38
Deviation alarm: air temperature control ±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight83Kg
Net Weight69Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: ≤600VA
Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: < 45 min
Noise level: ≤55dBA
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer0~9999 hour 59 minutes
Accumulative error of blue light timing≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38
Deviation alarm: air temperature control ±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight83Kg
Net Weight69Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: ≤600VA
Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: < 45 min
Noise level: ≤55dBA
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer0~9999 hour 59 minutes
Accumulative error of blue light timing≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38
Deviation alarm: air temperature control ±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight83Kg
Net Weight69Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: ≤600VA
Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: < 45 min
Noise level: ≤55dBA
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer0~9999 hour 59 minutes
Accumulative error of blue light timing≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38
Deviation alarm: air temperature control ±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight83Kg
Net Weight69Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.