Nanjing Everich Medicare Import & Export Co.,Ltd

DT12-D serves as a multi-purpose operation table, suitable for thoracic abdominal surgery cerebrial surgery,ENT,gynecology and obstertriocs as well as urology surgery.

Summary of Features and Properties:

The operating table is controlled by microprocessor.Two control panels are available,suitable for operation from different position.Locking keys are designed to avoid false operating.

Integrated hydraulic system adopts imported components,which guarantees low noise feature and ensures the reliability of the table.
Extra low position has been designed especially for cerebral and ophthalmic surgery.Doctor is able to take a seat druing operation.
The whole table's top can be moved forward,
back-ward,laft-ward and right-ward,which permits maximum full body use for a C-am,X-ray unit.
Extra width of table meets today's clinical requirement.
DT12-D is divided into five sections.including Head Section.Shoulder Section.Body Section,Pelvis Section and Leg Section.The surfaces of these sections are made of radiolucent material.By putting the x-ray film container between the upper and bottom deck of the table,radiographic examination can be carried out without moving the patient.
The movement of all sections are controlled by electric-driven.hydraulic controlled system.except for Head Section and Leg Section,which is made manually.
Shoulder section and body section can be
elevated,which make surgeries on gallbladder and kidney much easier.
The maneuverability and stability table base is fiexible and reliable.
With wide range of accessories,the table is suitable for all kinds of operation.
The whole unit is in accordance with the National Safety Standard for medical electric appliance.
The operating table is compact in structure and new in design.

Specitication:
Table top:Overall length:2060mm;width:480mm

Range of table height:minimum:550mm;elvatint range:330mm

Motor-powered longitudinal shift for the table tops:220mm

Optional accessories:
Anaesthesia screen 1set
Knee crutches 1set
Body Support 1set
Mattress 1set
Cassette Support 1set
Body strap 1set

YC.DT12-B serves as a multi-purpose operationtable,suitable for thoracic abdominal surgery cerbrial surgery,ENT,gynecology and obstertriocs as well as urology surgery.

Summary of features and properties:

1.Integrated hydraulic.system ensures the reliablility of the table.
2.Superior stainless steel housing for the basement and support system of the table makes cleaning and sterilization a easy matter.Ergonomic design provides the table with a clearcut.All matress are cast and made from polyster rubber.
3.The back section of the table is movable,on which an elevator can be fit for the operation on kidney or gall-bladder.
4.The surfaces of the table are made of plexiglass,By putting the x-ray film container between the upper and bottom deck of the table,radiographic examination can be carried out without moving the patient.
5.All the clamps for fixing the accessories are detachable and easy to use .
6.With the head rest and the double-sheet arm rest ,which is optional accessories,the cerebral surgery and lateral surgery are convenient.

Specification:

Table board:2070×500mm(L×W)
Height of table:   minium of height 650mm,
                                 adjustment range 0 to 300mm
The lateral adjustment:    -19° to +19°
Trendlendenburg adjustment: -29°to +29°
Back section:       up  to +75°
Head section:       -90°to 45°,detachable
Leg section: bifurcated type,
                    abductable up to 180(90either side) down position up to 90 detachable.
Foot section level with or vertical to table board,detachable.
Elevator range of kindney bridge:120mm
Power Supply:220V,50HZ
Electric motor:singel phase ,defferential pace,370W 1400rpm

Mandatory accessories:

1.Anaesthesia screen   1 set
2.X-ray film cassette   1 set
3.Kidney bridge         1 set
4.Side supports          1 set
5.Shoulder supports      1 set
6.Knee crutches          1 set
7.Arm rest            1 set
8.Body strap           1 set
9.Mattress            1 set
10.Cushions             1 set

Optional accessories:

Double deck arm rest
Neurosurgery head rest

500PCS/CTN 88.5X31.5X34.5CM 21KGSThe mechanical operating table model JT-1A is suitable for operating on head,neck, abdomen,chest,legs and so on in general surgery as well as gynaecological and urological surgery in hospitals and clinics.
Characteristic:

1.The new type of oil pump adopted in hydraulic pressure elevating and lowering system makes elevation very easy,the other operations are made manully.
2.It has a compact and reasonable structure,and a superior performance and quality.
3.The protective cove for table column is made of stainless steel.
4.It's designed with new and fine art on the table's outline which is easy for cleaning and sterilization.
5.All accessories can be detached with clamps. 6.By switching brake the table is convenient for transportation,moving and cleaning.
7.A new design of handle which is flexible is used for most of adjustments.
8.All adjustment are to be carried out at the left side of the table to make operations at most convenient.
9.A unique features of smooth elevation.
Technical data:

1.Table top:overall length 1930mm,width 480mm height adjustment 710~910mm
2.Head section adjustment+30~90°and detachable
3.Back section:adjustment 0°~75°,
4.Leg section:diverted range 0°~180°,
adjustment 0°~90°and detachable.
5.Foot section:
diverted type,level with table top or vertical,and detachable 6.Trendlendenbury movement:+20°~15°
7.Lateral tilt:+15° ~ -15°
8.Kidney bridge:elevation up to 80mm and detachable
Accessories:

1.Anaesthesia screen 1 set
2.Body supports 1 set
3.Body straps 1 set
4.Knee crutches 1 set
5.Handle 1 set
6.Single-sheet arm rest 1 set
Optional accessories:

1.Double-sheet arm rest 1 set
2.Versatile head rest 1 set
3.Head rest 1 set