Nanjing Everich Medicare Import & Export Co.,Ltd

Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: ≤600VA
Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: < 45 min
Noise level: ≤55dBA
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer0~9999 hour 59 minutes
Accumulative error of blue light timing≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38
Deviation alarm: air temperature control ±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight83Kg
Net Weight69Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

 1.Sterilizing course: Automatic sterilization controlled by computer, easy to operate

2.The electrical-heated elements of the unit are immersion tubes (AC/220v) with high heating effect. It should be grounded reliably.

3.With over-temperature, over-pressure auto-protect device

4.Whole body inner and outer made by stainless steel, anti-rust, easy maintenance and long time could be use.

Characteristics:

1.Sterilizing course: Automatic sterilization controlled by computer, easy to operate

2.The electrical-heated elements of the unit are immersion tubes (AC/220v) with high heating effect. It should be grounded reliably.

3.With over-temperature, over-pressure auto-protect device

4.Whole body inner and outer made by stainless steel, anti-rust, easy maintenance and long time could be use.

 Technical Data:

 LS-B120L
 
Valid volume
 120L(φ480×660)mm
 
working pressure
 0.14-0.16MPa
 
Working temperature
 126
 
Max. working pressure
 0.165 Mpa
 
Heat average
 ≤±1
 
timer
 0∼60min
 
Adjustment of temperature
 105∼126
 
Power
 6000W /AC220V.50Hz
 
Overall dimension
 670×690×1130mm

Transport dimension
 760×760×1280mm

N/G.W
 105Kg/136Kg
 

 Characteristics:

1.Sterilizing course: Automatic sterilization controlled by computer, easy to operate

2.The electrical-heated elements of the unit are immersion tubes (AC/220v) with high heating effect. It should be grounded reliably.

3.With over-temperature, over-pressure auto-protect device

4.Whole body inner and outer made by stainless steel, anti-rust, easy maintenance and long time could be use.

 Technical Data:

  MODEL

Technical Data
 B01.02102(LS-B75L-)
 
Valid volume
 75L(φ400×600)mm

working pressure
 0.22MPa
 
Working temperature
 134

Max.working pressure
 0.23 Mpa
 
Heat average
 ≤±1
 
timer
 099min 59 sec

Adjustment of temperature
 0134
 
Power
 4500W /AC220V.50Hz

Overall dimension
 460×660×1110 (mm)

Transport dimension
 550×750×1260 (mm)

G/N.W
 105Kg/82Kg