Etai Medical Co.,Ltd.

Parameters
Three ParametersSPO2TEMPPulse Rate.
Waveforms
Waveform: SPO2 waveform-PLETH
Features
1.Compact, small, light, easy for carrying and handling.
2.LCD display of measurement and PLETH.
3.Intelligent parameter monitoring interface.
4.Audio and visual alarm.
5.Storage and review of patients trend data up to 36 hours which is never lost even when powers off.
6.Build-in rechargeable Ni/MH battery.
7.Battery capacity indicator.
8.Automatic power-off
9.Patients trend can be transmitted to a personal computer for display, saving and printing.
Color
Blue or Pink can be selected.
Standard accessories
one SpO2 adult finger probe
one TEMP skin face probe
one charger
one communication cable
one software CD
1. General
Monitoring Parameters: SpO2PRPLETHPulse strengthTEMP
Signal socketsSpO2 socketPR socketTEMP socketadaptor socketPC communication socket
2. Display screen
Type:128×64 dot matrix homochromy LCD
Display area:45mm×30mm
Backlight color: White
LED:Dual-color LED (red/green)
Size: 120mm×63mm×32mm
Weight: 300gnot include probes and adaptor
3. Features
PLETH: The monitor can display PLETH waveform
Intelligent parameter monitoring screen: The monitor automatically selects the parameter measurements to display according to the probes connected to the monitor.
Audio and visual alarm: The speaker sounds the alarm and the parameters measurement flashes on the screen.
Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch.
Power saving: The monitor will automatic shut down when no monitoring for 3 minutes.
Trend: The monitor saves parameter measurements every 2 seconds and can store trend data up to 36 hours.
Data storage: The saved data will never be lost even if the monitor is powered off.
Communication: Transmitting the patients trend to a PC for display, observation, saving and printing.
4. Electrical specifications
Working Voltage: 6.0VD.C.9.0VD.C.
AC power adaptor
Input: 100-240VAC, 50/60Hz, 0.7A
Output: 8V D.C., 800mA
Internal battery
Type: 2Ahr/6V Ni/MH rechargeable battery
Run Time: 15-hour continuous operation with a new, fully charged battery (environment temperature is 25)
Recharge time: 10 hours
5. Environment
Temperature
Operation: 0°C ~ 45 °C
Transportation and storage: -20°C ~ 60 °C
Humidity
Operation: 15% - 95 %( noncondensing)
Transportation and storage: 10% - 95 % (noncondensing)
Altitude
Operation: 86 KPa ~106 KPa
Transportation and storage: 50KPa~106 KPa
6. Parameter Specifications
SpO2
Patient: Adult, child
Range: 35% - 100%
Resolution: 1 %
Accuracy: 70% - 99%: ±2 %
0% - 69%: Unspecified
PR
Range: 30 bpm ~250bpm
Resolution: 1bpm
Accuracy: ±2bpm
TEMP
Channel: 1
Input: Body surface thermal-sensitive resistor temperature sensor
Range: 050
Resolution: 0.1
Accuracy: ±0.2

Parameters
Three ParametersSPO2TEMPPulse Rate.
Waveforms
Waveform: SPO2 waveform-PLETH
Features
1.Compact, small, light, easy for carrying and handling.
2.LCD display of measurement and PLETH.
3.Intelligent parameter monitoring interface.
4.Audio and visual alarm.
5.Storage and review of patients trend data up to 36 hours which is never lost even when powers off.
6.Common AA alkaline or rechargeable batteries to support 7 continuous working hours;
7.Battery capacity indicator.
8.Automatic power-off
9.Patients trend can be transmitted to a personal computer for display, saving and printing.
10.Suitable for adult, pediatric, infant and neonate patients.
Standard accessories
one SpO2 adult finger probe
one TEMP Skin face probe
one communication cable
one software CD
Specifications:
Patient Range
Adult, pediatric, infant, neonate patients
Oxygen saturation (SpO2)
SpO2
Measurement range: 35%~100%
Accuracy: ±2%(70%~100%) ,0%~69% unspecified
Resolution: 1%
Pulse Rate
Measurement range:30 bpm -250 bpm
Accuracy:±2bpm
Resolution:1bpm
Temperature (TEMP)
Channel: 1
Input: Body surface thermal-sensitive resistor temperature sensor
Measurement range:0 oC50
Accuracy:±0.2
Resolution:0.1
Alarm
Mode:Audio and visual alarm
Setup:User-adjustable high and Low limits
Storage and Review
36 hours SpO2 \PR\TEMP trend data with corresponding date and time
Display Mode
LCD screen:128×64 dot matrix homochromy LCD
Measurements and information display
LED indicator:Red and green Dual-color LED
Red LED: insufficient battery power indicator
Green LED: pulsating rhythm indicator.
Operation Environment
Temperature:
Working:0 oC ~ 45oC
Transport and storage:-20 oC ~ 60 oC
Humidity:
Working:15%~ 95%(non-condensing)
Transport and storage:10 %~ 95%(non-condensing)
Altitude:
Working:86 kPa ~ 106 kPa
Transport and storage:50 kPa ~ 106 kPa
Power Requirements
Battery type:common 1.5V AA alkaline or rechargeable batteries
Run time:7 hours
Dimension
72 (W) ×130 (H) × 34 (D) mm

The Multi-parameter Patient monitor can be used to monitor 6 vital signals such as patients ECG, Respiratory value, Temperature value, Non-Invasive Blood Pressure (NIBP) value, SpO2 value and Pulse Rate (PR).
Features:
12.1 high-resolution TFT display, which can indicate waves of ECG, respiratory rate (RESP) and pulse in detail;
20 methods of automatic arrhythmia analysis, ST segment analysis;
Can recall lapsed ECG wave in 5 minutes, and the wave can be frozen;
Complete ECG monitoring through selection by different leads positioning;
Up to 96 hour tendency statistics of SpO2, pulse rate and non-invasive blood pressure;
Data memory of up to about 10 groups of VPC events for review and analysis;
Memory and view of a list of up to 400 measures of non-invasive blood pressure, as well as heart     rate, temperature, respiratory rate and SpO2/pulse rate when the measure of blood pressure is taken;
Unique SpO2 measuring device is used to ensure accuracy of the SpO2 and pulse rate measurements;
Resistance against interference from defibrillator and electrosurgical knife. It may be used along with cardiac pacemaker;
Blood pressure may be measured in the mode of adult/infant/neonate, which may be selected via the menu, to better suit the neonate or infant or adult patient;
Information like printer, output waveform and text may be set as necessary;
The modular equipment design allows the user to choose different monitoring parameters and form a monitor according to users own need;
It may be networked with the center as a part of the central network.

The Multi-parameter Patient monitor can be used to monitor patients ECG, Respiratory value, Temperature value, Non-Invasive Blood Pressure (NIBP) value, SpO2 value, Pulse Rate (PR) and other physiological parameters.

1. Monitoring Parameters: ECG, NIBP, SPO2, Pulse Rate (Heart Rate), TEMP, Respiration
2. Display in both Chinese and English.
3. Multi-waveforms rolling(or renovating) display with adjustable display speed
4. S-T segment synchronized detection and analysis ST
Maximum 380-hour graphic and tabular trends of all parameters
5. 400-set NIBP, HR, TEMP, SPO2, RESP data storage
6. 50-min.ECG real time waveform and parameters storage and review

7. Able to be connected with the central monitor station
8. Inner High-definition thermal dot matrix recorder optional, which can output waveforms and characters
9. Build-in rechargeable battery, long operating time

Specifications
ECG
Whole-lead ECG cable, standard AAMI cable connector
Lead selectionI, II, III ,avR; avL; avF; C (v1,v2,v3,v4,v5,v6)
Gain selection×1/4, ×1/2, ×1, ×2
Sweep speed12.5,25,50mm/s
Bandwidth0.05-40Hz
0.05-100Hz
Calibration signal1mv
ProtectionAgainst electrosurgical interference and defibrillation
Heart Rate
Measuring Range30-250bpm
Accuracy ±1bpm
Resolution 1bpm
Alarm Mode: Audible and visual alarm

RESP
MethodResistance on chest
Measuring Range0-120bpm
Gain selection ×1/2, ×1,×2,×4
Oxygen Saturation (SPO2)
Measuring Range35-100%
Accuracy ±2%70%-100%
NIBP
Method Oscillometric
Mode : Manual, Auto, STAT
Measuring interval in AUTO mode: 1-250(min)
Measuring period in STAT mode: 5min
Measuring type SYS, DIA, MEAN
Measuring RangeSYS5.3-36 kPa
DIA2.7-26.7 kPa
MEAN4.0-29.3 kPa
Temperature
Measuring Range35.5-45.5
Resolution: ­0.1
Accuracy ±­0.2

Parameters:
Five Parameters: ECG, NIBP, Pulse Rate, TEMP, SPO2.
Waveforms:
Two Waveforms: ECG waveform, SPO2 waveform (PLETH).
Features:
1.Handheld; Compact, light, easy for carrying and handling.
2.Clear and bright LCD small screen real time display, Touch Screen.
3.Can be display the data and the waveform in a screen, and also can be switch between ECG waveform and PLETH.
4.English interface to simple read and handling.
5.Build-in rechargeable Ni/MH battery, longtime operating time.
6.Storage and review of patient trend data up to 36 hours which is never lost even when power is off.
7.Audio and visual alarm.
8.Battery capacity indicator.
9.Automatic power-off.
Standard accessories :
one ECG cable with TEMP sensor
one NIBP cuff with extend tube
one SpO2 adult finger probe(soft)
one charger
one touch pen inside the model
Technical Specifications
ECG
Input3-core ECG cable, standard AAMI cable connector
Lead selectionI,II,III
Gain selection:X1, X2, X4, X8
Frequency response:
None filter: 0.05100Hz (-3dB)
filter: 0.540Hz (-3dB)
Scan Speed: 12.5, 25, 50 mm/S
ECG standard signal: 1mV square wave generated by hardware
Heart rate
Measure range: 20250 bpm
Renew time: 1 time per beat
Accuracy: 1 bpm
Alarm limits range: Upper limits 80250bpm, Lower limits 40100 bpm
Alarm mode: Audible and visual alarm
NIBP
Measure Method: Automatic oscillometric
Average measure time: 40 seconds
Repeat Cycles: 1, 2, 3, 5, 10, 15, 20, 30, 60 minutes
Alarm limits range:
SYS : Upper limits 120250 mmHg, Lower limits 60180 mmHg
DIA : Upper limits 80150 mmHg, Lower limits 40120 mmHg
MAP : Upper limits 100230 mmHg, Lower limits 50160 mmHg
SpO2
Measure Range: 35100%
SpO2 Accuracy: 2%(7099%), 3%(4070%)
Pulse Rate Range: 0254 bpm
Pulse Rate Accuracy: 1 bpm

Alarm limits range:
SpO2 upper limits : 9599%
lower limits: 8596%
Pulse Ratekeep up with the heart rate

Temperature
Input : Apply the same sensor with ECG
Measure range: 050
Alarm limits range: Upper limits 3645 Lower limits 3438
Measure accuracy: 0.1

System specifications
Alarm ON/OFF: controlled by general switch and parameter switch (two levels)
Display mode: Homochromy LCD hand touch screen
Waveform channel: Single channel
Trend data: 36-hour HR, SpO2, TEMP,SYS, DIA, trend data.
Dimensions: 114(D)X45(H)X150(W) mm