Contec Medical Systems Co., Ltd.

1.This device can be wear easily and comfortably on the patients'wrist.

2.It use to spot-check of blood oxygen saturation and pulse rate .

3.Can be used for monitoring daily activities and overinght sleep studies,The compact 

design is intended to give the patient greater freedom while improving patient compliance.

 4.Compact and light weight design,fit comfortably on the patients wrist

5.Simply plug in the sensor and out

6.High accuracy and repetition

7.Friendly operation menu for the funcion setting

8.256k color OLED display with 4 directions

9.Pulse strength:OLED Graphic display

10.Battery Voltage indication:OLED graphic display

11.Plethysmograph Wave to assist in obtaining a strong reading

12.Can be used in high altitudes, at high & low temperatures

13.Built-in Alarms for SPO2 and Pulse Rate

14.Built-in Memory for up to 24hrs of Data Storage

15.Ideal for Doctors, Home Health Care, Clinics, Hospitals

16.Also can be used for Aviation, Sports, Mountain Climbers, Walkers

17.Superior Color OLED Screen with Multi-Directional Views

18.Brightness Adjustment for Viewing in any Light

19.Built-in Rechargeable Lithium Ion Battery Cell

20.Includes USB Cable for Download

21.Includes SPO2 Monitoring Trend Software

22.Inner flash memory for data storage

23.Power supply:3.7V Rechargeable Lithium battery and accharger with USB interface

 Can be used in: hospital,home,community medical treatment,sports healthcare, etc.

 Can measure SPO2 and PR accurately

 SPO2 and PR display, bargraph display

 Battery voltage low indication

 Low power consumption; shut off  automatically when no signal

 Small volume(57(L) × 33(W) ×32(H) mm)light,convenient to carry

 LED display

 SPO2: 35-99%  Pulse Ratio:30-250BPM 

 Resolution: 1% for SPO2, 1BPM for pulse ratio

 Accuracy: ±2% (7099), unspecified (<70%) for SPO2, ±2BPM or±

  2% (select larger) for pulse ratio

 Power: 1.5V (AAA size) alkaline batteries × 2

 Can work more than 30hours continuously 

 Interference resistance capacity against ambient light and measurement performance 

 at low perfusion

Can be used in: hospital, home,community medical treatment,sports healthcare, etc.

Can measure SPO2 and PR accurately

SPO2 and PR display, PR waveform and bargraph display

Battery voltage indication

Backlight

Low power consumption;shut off automatically when no signal

Small volume(65(L) × 35(W) ×40(H) mm)light, convenient to carry

Technical Parameters

1.6' LCD display,resolution 128*64

SPO2:35-99% Pulse Ratio:30-250BPM 

Resolution: 1% for SPO2, 1BPM for pulse ratio

Accuracy: ±2% (7099), unspecified (<70%) for SPO2, ±2BPM or

2% (select larger) for pulse ratio

Power: 1.5V (AAA size) alkaline batteries × 2

Can work more than 30 hours continuously (backlight off)

Interference resistance capacity against ambient light and measurement performance at low perfusion

1.Display Mode : Color OLED  6 Direction Display

2.SPO2 measuring range: 35-100%

3.Pulse Ratio:30-254 BPM

4.Pulse Waveform display: bargraph display

5.Battery indication: OLED display

6.Power Requirements: 1.5V(A A A size )Alkali Batteries×2

7.Adaptable range:2.6V-3.6V

8.Working current:≤25mA

9.Resolution: SPO2 : 1% Pulse Rate: 1bpm

10.Accuracy: SPO2 :70% to 100% ±2digits,below 70% unspecified Pulse rate:±2bpm or ± 2%(select larger)

11.Measurement at Low Perfusion: The values of SPO2 and pulse rate can be displayed       properly when pulse saturation is at 0.4%.

12.Resistance to surrounding light: Deviation is smaller than ±1% between value of 13.Oxyhemoglobin measured in natural lighting indoor condition and present lighting sources and that measured in dark room.

14.Automatic shutdown function:The device will power off automatically within 5 seconds when there is no finger in the device. I.

15.When working,the display direction can be changed by pressing the button shortly.

16.There are six modes of direction. J.In working irem,long press can change the lighteness of the screen.

1.Display Mode : Color OLED  6 Direction Display

2.SPO2 measuring range: 35-100%

3.Pulse Ratio:30-254 BPM

4.Pulse Waveform display: bargraph display

5.Battery indication: OLED display

6.Power Requirements: 1.5V(A A A size )Alkali Batteries×2

7.Adaptable range:2.6V-3.6V

8.Working current:≤25mA

9.Resolution: SPO2 : 1% Pulse Rate: 1bpm

10.Accuracy: SPO2 :70% to 100% ±2digits,below 70% unspecified Pulse rate:±2bpm or ± 2%(select larger)

11.Measurement at Low Perfusion: The values of SPO2 and pulse rate can be displayed       properly when pulse saturation is at 0.4%.

12.Resistance to surrounding light: Deviation is smaller than ±1% between value of 13.Oxyhemoglobin measured in natural lighting indoor condition and present lighting sources and that measured in dark room.

14.Automatic shutdown function:The device will power off automatically within 5 seconds when there is no finger in the device. I.

15.When working,the display direction can be changed by pressing the button shortly.

16.There are six modes of direction. J.In working irem,long press can change the lighteness of the screen.

Can be used in: hospital, home,community medical treatment,sports healthcare, etc.

Can measure SPO2 and PR accurately

SPO2 and PR display, PR waveform and bargraph display

Battery voltage indication

Backlight

Low power consumption;shut off automatically when no signal

Small volume(65(L) × 35(W) ×40(H) mm)light, convenient to carry

Technical Parameters

1.6' LCD display,resolution 128*64

SPO2:35-99% Pulse Ratio:30-250BPM 

Resolution: 1% for SPO2, 1BPM for pulse ratio

Accuracy: ±2% (7099), unspecified (<70%) for SPO2, ±2BPM or

2% (select larger) for pulse ratio

Power: 1.5V (AAA size) alkaline batteries × 2

Can work more than 30 hours continuously (backlight off)

Interference resistance capacity against ambient light and measurement performance at low perfusion