Contec medical

Feature:
Baby Sound B Fetal Doppler is a safe and easy to use device that has been specially designed for use at home, allowing pregnant women to listen to their unborn baby's heart beat, movements and hiccups from as early as 10 to12 weeks. It is suitable for expectant mother to carry out regular checks on her baby in between routine hospital checks. It can not only reduce the expectant mother’s anxiety but also allow other members of the family to listen to the baby heartbeat. This portable device is also suitable for obstetricians, midwives and pregnant women. It can connect to a computer, CD or Type to record the baby heart sound and share your baby’s heart beat with family and friends via email. Baby Sound B integrates a single chip CPU, LCD display and our accurate arithmetic software, it can display the baby’s heart rate and it is very convenient to get baby’s accurate heart rate. 2 AAA size batteries (alkaline or chargeable) are very easy to buy. The batteries can last more than 6hours for continuous use (depend on capability)
Feature and Technical Specification
■ All in one design.
■ The probe and main units integrated together
■ High sensitive Doppler probe
■ Crystal clear sound
■ Low power consumption
■ Compact and light
■ Ergonomic design
■ Easy to use
■CE approved
■ Heart Rate Display (LCD)
■ Automatic Display Freezing After remove from the body
■ Heart Rate Range 50-240 bpm
■ Accuracy ± 2 or 2%
■ Ultrasound Frequency 2MHz
■ Ultrasound Intensity <10mW/cm2
■ Out put Headset with Volume Control
■ Double Audio Output sockets for Headset
■ Power Supply: 1.5V Battery x 2 (Type: AAA)
■ Sensitivity From 10 - 12 weeks
■ PC Interface cable
■ Battery Life >360 minutes
Safety Standards
■ CE Certified, EN ISO 13485:2003 compliant
■ Conforms to UK and EC Medical Safety Requirements (Medical Directive
93/94/EEC) CE 0123

CONTEC-06 ABPM is a non-invasive，silent, compact, lightweight and reliable blood pressure monitor for ambulatory applicaton.2AA alkaline batteries can sustain more than 600 measurement in a period of 48 hours. It provides double safety protection and can be connected to any laptop or desktop PC.
The software provides a user-friendly interface and comprehensive analysis.
Specification:
Measurement method: Oscillometry
Operation model: Manual/Automatic/STAT
Measurement unit: mmHg/KPa selectable
Measurement types: Systolic, Diastolic, Mean
Measurement range: Adult pressure: 10 to 270 mmHg; Pulse rate: 30 to 220; Pediatric pressure: 10 to 200 mmHg; Pulse rate: 30 to 220; Neonate pressure: 10 to 135 mmHg; Pulse rate: 30 to 220
Resolution: 1 mmHg
Over-pressure protection: Yes
Input/output: RS232
Accuracy: Pulse rate:?% or ? BPM which is greater
Blood pressure: Meets ANSI/AAMI SP10-1992
Safety: Independent safety microprocessor monitors cuff pressure, measurement time as well as the operation of the main microprocessor

Integrated with SPO2 probe and processing display module.
Can be used in: hospital, home, community medical treatment, sports healthcare, etc.
Can measure SPO2 and PR accurately
SPO2 and PR display, PR waveform and bargraph display
Battery voltage low indication
Four directions and six modes
Low power consumption; shut off automatically when no signal.
USB port, sync with PC based analysis software.
Built-in memory, store more than 24 hours patient data.
Small volume(58.5(L) × 31(W) ×32(H) mm)、light，convenient tocarry
Technical Parameters
1.0' double Color OLED display, resolution 128*64
Spo2：35～99％ Pulse Ratio：30～250BPM
Resolution: 1% for SPO2, 1BPM for pulse ratio
Accuracy: ±2% (70％～99％), unspecified (<70%) for SPO2, ±2BPM or±2% (select larger)for pulse ratio
Power: 1.5V (AAA size) alkaline batteries × 2
Can work more than 30 hours continuously
Interference resistance capacity against ambient light and measurement performance at low perfusion

■ Integrated with SPO2 probe and processing display module
■ Can be used in: hospital, home, community medical treatment, sports healthcare, etc.
■ Can measure SPO2 and PR accurately
■ SPO2 and PR display, PR waveform and barograph display
■ Battery voltage indication
■ Backlight
■ Low power consumption; shut off automatically when no signal
■ Small volume(65(L) × 35(W) ×40(H) mm)、light, convenient to carry
Technical Parameters
■ 1.6' LCD display, resolution 128*64
■ SPO2: 35～99％ Pulse Ratio：30～250BPM
■ Resolution: 1% for SPO2, 1BPM for pulse ratio
■ Accuracy: ±2% (70％～ 99％), unspecified (<70%) for SPO2, ±2BPM or±2% (select larger) for pulse ratio
■ Power: 1.5V (AAA size) alkaline batteries × 2
■ Can work more than 30 hours continuously (backlight off)
■Interference resistance capacity against ambient light and measurement performance at low perfusion

Feature:
Routine Check Mode and Continuous Monitoring Mode
Data Graph and Trend Table Review
Rich Analysis Report
Perfect Mount Solution
Convenient operation by touch screen
Large SD card memory for more than 2000 patient cases storage
Sync with PC based Software (WinXP and WinVista)
Performance Specifications:
Display: 3.5" Color TFT
Resolution: 320x240
Display Mode: Standard face, Waveform face, SPO2 view, ECG view, BigNum view
Indicator: Power indicator light, Alarm sound, Pulse tone
Interface: One dual-purpose socket for connecting sensors and communication cables
Power Supplied 5V, <500MA
Battery: Builtin Li-Polymer, 2 hours for charging, 3 hours
For continuous working.10 hours for standby mode
Trend Graph: Resolution from 1s, 5s, 10s. Maximum time: 96 hours.
Trend Table: Resolution from 1s, 5s, 10s. Review up to 1000 items.
Alarm: Adjustable High and Low limits. Three level audible and visual alarm
User Configuration: All the color of parameters and waves can be set according to user's willing
Technical specifications:
Safety
Meet the requirement of IEC60601 series
Type of Protection: Class II with internal electric power supply
Degree of Protection: BF
Dimension and Weight
Dimention: 92(W) x82(H) x22(D) mm
Weight: 136g (with battery)
Operation Environment:
Temperature:0℃~ +40℃
Humidity: 15% ~ 95%
Storage Environment:
Temperature:-20℃~ +60℃
Humidity: 10% ~ 95%
Patient Range
Neonate, Pediatric and Adult

Features:
■ Routine Check Mode and Continuous Monitoring Mode
■ Data Graph and Trend Table Review
■ Rich Analysis Report
■ Perfect Mount Solution
■ Convenient operation by touch screen
■ Large SD card memory for more than 2000 patient cases storage
■ Sync with PC based Software (WinXP and WinVista)
Technical specifications:
■ Safety
■ Meet the requirement of IEC60601 series
■ Type of Protection: Class II with internal electric power ¡supply
■ Degree of Protection: BF
■ Dimension and Weight
■ Dimention: 92(W) x82(H) x22(D) mm
■ Weight: 136g (with battery)
Operation Environment:
■ Temperature:0℃~ +40℃
■ Humidity: 15% ~ 95%
Storage Environment:
■ Temperature: -20℃~ +60℃
■ Humidity: 10% ~ 95%
■ Patient Range
■ Neonate, Pediatric and Adult