Jiangyin Binjiang Medical Equipment Co., Ltd.

1. The lid is equipped with safety valve and air releasing valve. When the steam pressure exceeds 0.16MPa, the safety valve can automatically release the pressure that is too high, having double safety function and featuring safety and reliability in use. The lid is also equipped with a pressure gauge with megabar and temperature readings, which conveniences the user.
2. The product can also use liquefied petroleum gas and coal stove as the heating energy.The product is heated by the immersed electro-thermal tube.
3. The container and drum adopted stainless steel 0Gr18Ni9Ti, anti-acid, anti-alkali and anti-rust.
 
TECHNICAL DATA:
 
  Model Technical Data
 YX-280B (new type)
 
sterilizing volume
   
18L (φ280×260 mm)
 
working pressure
   
0.14-0.16 MPa
 
Max. safety pressure
   
0.165Mpa
 
power / consumption
   
AC220V.50Hz / 2KW
 
dimension
   
400×400×540  mm
N / G. W
   
11 / 13 Kg

Model: LS-B35L, LS-B50L, LS-B75L,LS-B100L

Technical data:
1. Valid volume: 35L, 50L, 75L,100L
2. Working pressure: 0.22 MPa
3. Working temperature: 134°C
4. Max. working pressure: 0.23 Mpa
5. Heat average: ≤±1°C
6. Timer: 0~60 min
7. Adjustment of temperature: 105~134°C
8. Power: 2,500W/AC220V, 50Hz; 3,000W/AC220V,50Hz; 4,500W/AC220V, 50Hz
9. Overall dimensions: 480 x 460 x 850mm, 520 x 520 x 980mm, 560 x 560 x 980mm,590×590×1080mm

Packing:
Dimensions: 57 x 55 x 101cm, 59 x 59 x 112cm, 65 x 63 x 115cm,68×65×122cm
N.W.: 42kg, 50kg, 60kg,66kg
G.W.: 56kg, 68kg, 80kg,88kg

Saturated pressure steam is used to sterilize article, for it will liberate a great amount of heat when condensing. To make the articles (need to be sterilized) hot and wet for a certain time, most resistant bacterial spores will be killed, and then sterilization aim is reached. The method is reliable, economical, and easy to be controlled, so it has been used for more than one hundred years.

  This unit is ideal equipment for clinics, scientific research institutes and other organizations to sterilize surgical instruments, fabric glassed, culture media etc.

Technical data

         Volume of sterilizing chamber:              0.28m³ (Φ0.6m x 1m)

         The Max. Working pressure:                    0.22 MPa 

         The Max. Working temperature:              134 ±1

         Preset Operation temperature:                40~134

         Range of setting time for sterilization:      0min~60min adjustable, selected by user

         Range of setting time for drying:              0min~60min adjustable, selected by user

         Heat equilibrium:                       ≤2

         Power: Supply with mains steam:         12kW/AC380v/50Hz

         Dimension:                                77X150X 175  (cm)

         Transport size:                         92×168×208  (cm )

         Weight:                              Net 365kg / Gross 470kg 

         Sterilizing course automatic sterilization controlled by computer, easy to operate.

         With drying function, suitable dressing drying.

         With over-temperature, over-pressure auto-protect device.

        The door opening mechanism cannot be operated until the pressure in the chamber is reduced to 0.027MPa.

        It can't be start on if the door doesnt close well.

        The safety valve will be open automatically when the inner pressure over 0.24MPa, and the steam be exhausting to the water tank..

        The power will be cut -off automatically, cut-off the water and alarm when the machine lacking water.

Saturated pressure steam is used to sterilize article, for it will liberate a great amount of heat when condensing. To make the articles (need to be sterilized) hot and wet for a certain time, most resistant bacterial spores will be killed, and then sterilization aim is reached. The method is reliable, economical, and easy to be controlled, so it has been used for more than one hundred years.

  This unit is ideal equipment for clinics, scientific research institutes and other organizations to sterilize surgical instruments, fabric glassed, culture media etc.

Technical data

code
 name
 WS-280YDB
 
1

Capacity
 280L (Φ0.6m x 1m)
 
2
 Max.work pressure
 0.22MPa
 
3
 Max.work temperature
 134
 
4
 Heat evenness
 ≤2
 
5
 Temp.range
 40134
 
6
 Timer range
 1min99min59sec
 
7
 Dry time range
 1min99min59sec
 
8
 Power consumption
 12KW/AC220V.50Hz
 
9
 Characteristic
 Auto water-incooling air releasesterilizetimingair releasedrytimingalarm
 
10
 Safety
 Over pressureover temperature protection deviceauto pressure releaselack water and overheat protectionover current power cut off the door be locked when the pressure inner over0.027MPa,with the function of interlock
 
11
 Dimension
 85×154×187  (cm)
 
12
 Trans Dimension
 96×161×202  (cm )
 
13
 Weight
 Net: 460kg / Gross: 700Kg
 

Specifications

         Sterilizing course automatic sterilization controlled by computer, easy to operate.

         With drying function, suitable dressing drying.

         With over-temperature, over-pressure auto-protect device.

        The door opening mechanism cannot be operated until the pressure in the chamber is reduced to 0.027MPa.

        It can't be start on if the door doesnt close well.

        The safety valve will be open automatically when the inner pressure over 0.24MPa, and the steam be exhausting to the water tank..

        The power will be cut -off automatically, cut-off the water and alarm when the machine lacking water.

Saturated pressure steam is used to sterilize article, for it will liberate a great amount of heat when condensing. To make the articles (need to be sterilized) hot and wet for a certain time, most resistant bacterial spores will be killed, and then sterilization aim is reached. The method is reliable, economical, and easy to be controlled, so it has been used for more than one hundred years.

  This unit is ideal equipment for clinics, scientific research institutes and other organizations to sterilize surgical instruments, fabric glassed, culture media etc.

Technical data

         Volume of sterilizing chamber:              0.28m³ (Φ0.6m x 1m)

         The Max. Working pressure:                    0.22 MPa 

         The Max. Working temperature:              134 ±1

         Preset Operation temperature:            40~134

         Range of setting time for sterilization:      0min~60min adjustable, selected by user

         Range of setting time for drying:          0min~60min adjustable, selected by user

         Heat equilibrium:                       ≤2

         Power: Supply with mains steam:         12kW/AC380v/50Hz

         Dimension:                           77X140X 178  (cm)

         Transport size:                         96×161×200  (cm )

         Weight:                              Net 410kg / Gross 650kg 

         Sterilizing course automatic sterilization controlled by computer, easy to operate.

         With drying function, suitable dressing drying.

         With over-temperature, over-pressure auto-protect device.

        The door opening mechanism cannot be operated until the pressure in the chamber is reduced to 0.027MPa.

        It can't be start on if the door doesnt close well.

        The safety valve will be open automatically when the inner pressure over 0.24MPa, and the steam be exhausting to the water tank..

²        The power will be cut -off automatically, cut-off the water and alarm when the machine lacking water.

Detailed Product Description Technical data: 1. Model: CQS/D0.25,CQS/D0.36.CQS/D5.0 2. Valid volume: From 250L to 5000L 3.Design pressure0.245MPa 4.Design temp.139 5.Working pressure: 0.000.22Mpa 6.Working temperature: 100134 7.Heat average≤±1 8.Max vacuum0.09Mpa 9.Transportation terms: Ralative temperature -40-+50 This equipment is specially suitable for sterilizing clothes and filled canned products in high sanitation places.It has function of both pulsation vacuum removing cold air disturbing and vacuum drying. Horizontal rectangle structure.High quality acid-proof stainless steel 304 inner chamber,stainless steel hair-drawing plate for decoration deck.The sealing door can adopt double-ddor-leaf auto-moving door or mechanical door,it meets GMP standard and has joint for users to test and verify equipment at any time. The computer-control or PLC+touching screen system can be adopted in control system.Main parts are water recycle vacuum pump,peumatic valve etc.