Medical Equipment direct from China - Tsingtao Unicom-Optics Instruments Co., Ltd.
Home» products»Medical Equipment

Tsingtao Unicom-Optics Instruments Co., Ltd.

Select to
Page 1 of 4
  • Hematology Analyzer PE-6300
    Hematology Analyzer (PE-6300)
    PE-6300 auto hematology analyzer is an easy operation and owns perfect blood analytical system with 3-part differentiation of WBC. Its advantaged at digital technology, float discriminator, intelligent flush, time & volume quantitative technique guaran - tees the precise result.
    Built-in sample processor and test unit
    High precision microanalysis technology
    Low consumption of blood sample volume:Venous9.6 µL,prediluted 20 µL for twice
    High voltage zap with monitor in real time,recoil flush technology
    Double convolution and intelligent fitting technology
    Intelligent float discriminator, manual adjustment
    Windows interface
    Graphical buttons, mouse & keyboard opration
    Input various information, induding name, office, sender etc.
    Real-time assistance and operation guide
    Professional calibration programe and comprehensive QC project
    Various printout formats
    20 parameters+3 color histograms
    With three detecting modes: Venous, Capillary and prediluted, accurately detect the following 23 parameters in any mode:
    WBC,LYM#,MID#,GRAN#LYM%,GRAN%,RBC,HGB,HCT,MCV,MCH,MCHC,RDW-SD,RDW-CV,PLT,MPV,PDW,PCR,P-LCR.
    Color histograms:WBC,RBC,PLT
    Technical Specifications
    Principle:
    Electrcal resistance for counting, hemiglobincyanide measurement and SFT method for hemoglobin

    Parameter:
    3-part differentiation of WBC
    20 PARAMERERS + 3 color histograms (WBC,RBC,PLT)
    Sample Volume:
    Venous:9.6µL
    Capillary:9.6µL
    Prediuted:20µL
    Working Mode:
    Counting passage detection+independent HGB measurement system;
    Operation Mode:
    Windows interface, graphical buttons, keyboard & mouse opration
    Aperture Diameter:
    WBC/RBC/PLT:80µm
    Data Storage:
    Up to 12,000 results with histograms
    Quality Control:
    L-J curve,X SD CV
    Calibration Mode:
    Relatively independent manual calibration and auto calibration in three detecting modes.
    Cross Contamination Ratio:
    WBC,RBC,HGB<0.5%,PLT<1%
    Performance:
    Paramerer
    Repeatability(cv%)
    Liner Range
    WBC
    ≤3.0%(7.0-15.0)
    0.0-99.9×103/µL
    RBC
    ≤3.0%(3,50-6.00)
    0.0-99.9×106/µL
    HGB
    ≤2.0%(11.0-18.0)
    0-30.0g/dL
    MCV
    ≤1.0%(80.0-110.0)
    40-150ft
    PLT
    ≤6.0%(100-500)
    0.0-99.9×103/µL
    Display:
    8.4 High Resolution LCD monitor
    Information:
    Input various information, including name, office, sender etc.
    Interface:
    USB,PS/2, parallel interface,RS-232 ports for network
    Printout:
    Internal rapid thermal printer, external inkjet printer, various printout formats
    Working Engcironment:
    Temperature:1535;Humidity:10%-90%
    Power supply:AC100-240V 50±1HZ
  • RAY Machine(GDX-50A)
    RAY Machine(GDX-50A)
    Output image size: 50mm
    Survey thickness:280mm
    Resolving power:>4LP/mm
    Screen lighteness:>40cd/m2
    X tube high pressure:35-75kV
    X tube electricity:0.2-0.5mA
    X ray leak speed: <5mR/h
    Net weight:3.6kg
    Power:80W
    Power Supply:
    220V50HZ

  • Autoclave (YXQ-LS-75G)
    PRODUCT CHARACTERISTIC:
    Auto-control type with drying function
    Structure of handwheel type quick-door-open safety interlock device (accord with the 49th requirement of Vessel Regulations)
    Material: outer and chamber are made of high quality stainless steel SUS304, acidproof, alkali resistance, anti-corrosive
    Microcomputer intelligent control
    Pressure safety interlock device, over temperature protection device
    Auto-raising type packing ring,exhaust cold air automatically
    Auto-exhause when over pressure, low water level alarm, auto-control when lack of water
    Temperature range (109-135), sterilization time range (4-120min), drying time range (drying after sterilization) (30-240min)
    Inner circulation exhaust type, with 3L steam collection bottle
    Automatic inlet, heating, sterilization, exhaust and drying
    Buzzer reminds after work and close-down automatically
     
    Work process of sterilization and drying
    a: sterilization temperature decreases to 102, then exhaust and drain
    b: sterilization, exhaust and drain after sterilization
    c: sterilization, exhaust, drain, drying
     
    Technical Parameters:
    Model: YXQ-LS-75G
    Volume: 75L
    Max. working temperature: 135
    Max. working pressure: 0.22MPa
    Power Consumption of sterilization: 3.2KW
    Power Consumption of drying: 0.8KW
    Power supply: 220V10%/50Hz2%
    DIM. Exterior (mm): 600*500*1150
    DIM. Interior (mm): 350*625
    DIM. Basket (mm): 360*280*2

  • Electric Heat Water Bath Boiler
    Electric Heat Water Bath Boiler
    It is used for precise constant temperature and assistant heating in medical sanitation, industry and mining enterprises, scientific research institute and medical college for inspecting and testing pathology blood serum.

    Product characteristics
    Interior chamber is made of stainless steel. The overall of the apparatus is made of quality steel plate with beautiful and novel shape. The outer is lacquered well.
    The temperature controller is selected with high precision sensor and integrate circuit. With that it controls the temperature precise and reliable.
    Main technical parmeters of water bath boiler
    Model     Working dimensions   Consumption Power    Temp.range&accuracy
    HHS-11-1       170X170X120mm        0.3Kw         RT+5-100oC   ±1oC
    HHS-11-2       310X180X120mm        0.5 Kw        RT+5-100oC   ±1oC
    HHS-11-4       620X170X120mm        1.0 Kw        RT+5-100oC   ±1oC
    HHS-11-6       920X170X120mm        1.5 Kw        RT+5-100oC   ±1oC
    HHS-11-8       1220X170X120mm      2.0 Kw        RT+5-100oC   ±1oC
    HHS-21-4       310X310X120mm        0.8 Kw        RT+5-100oC   ±1oC
    HHS-21-6       500X310X120mm        1.2 Kw        RT+5-100oC   ±1oC
    HHS-21-8       620X310X120mm        1.5 Kw        RT+5-100oC   ±1oC
  • Dentistry chairs (TX6028-B)
    Dentistry chairs (TX6028-B)
    Detailed introduction:
    STANDARD ACCESSOIRES
    NSK four-way high speed air turbine H.P.
    2sets
    NSK four-way low speed air turbine H.P.
    1set
    Automatic timerised water rinsing and cup filling system   
    1set
    24V low-noice DC.motor
    1set
    Operation cold light   
    1set
    Air suction and saliva ejector system
    1set
    Air-lock tool box   
    1set
    3-way syringe
    1set
    Operator stool
    1set

  • Dentistry chairs (TX6058-C-I)
    Dentistry chairs (TX6058-C-I)
    Detailed introduction:
    STANDARD ACCESSOIRES
    NSK four-way high speed air turbine H.P.   
    2sets
    NSK four-way low speed air turbine H.P.
    1set
    Luxury ceramic spitton
    1set
    Automatic timerised water rinsing and cup filling system
    1set
    24V low-noice DC.motor
    1set
    Hard P.U.box   
    1set
    Operation cold light
    1set
    Air suction and saliva ejector system
    1set
    Air-lock tool box
    1set
    3-way syringe   
    1piece each
    Multifunctional foot controller
    1set
    Operator stool
    1set
Select to
Page 1 of 4 << Previous 1
Go to Page