Nanjing FoiNoe Co.LTD

Functional Character
·This machine can clean and oil the parallel shank or bending handpiece accurately and easily at any time．
·It have the character of high security，easily operating，easily commandeering，and any person can operate it．
·Three dental handpieces can be oiled and cleaned at the same time．
·Swing pinion of the machine can effectively clean and oil the dental handpiece from different angles．
·Having completed the procedure of the cleaning and oiling，the remained oil can be cleared by pressing the air key．
·Different handpieces can be oiled by choosing the short mode。The long mode，and the longer mode．
·Oil mist filtration cotton can prevent the least diffusing of the oil mist．

Parameters
Voltage Rating AC220V, 50Hz AC110V, 60Hz
Air Pressure 0.35～O.60Mpa (3.5～6.Okgf/cm2) (50～80ps)
Can Volume 350mL
Overall Dimension 285mm×355mm×275mm
Net Weigh 7.5 kg


Mode Style of handpiece Time of cleaning and oiling Time of cleaning
Short Mode Air-compressed turbo handpiece
Handpiece using of NAKANISHI
NM series gear end
Handpiece using of NAKANISHI SGM series gear end Aimost 35 Seconds Aimost 60 Seconds
Long Mode Bending handpiece Aimost 45 Seconds Aimost 80 Seconds
Long Mode handpiece is alien to
the short mode and long mode Aimost 50 Seconds Aimost 90 Seconds