Qingdao Medicon Trading Company

Function features:
☆ Microprocessor based servo controlled
　 temperature system
☆ Temperature displayed by LED
☆ Alarms functions:
　　 Power failure; over
　　 temperature;
　　 temperature deviation;
　　 temperature sensor failure;
　　 fan failure;
☆ >37℃ temperature setting
☆ A keypad lock prevent inadvertent changes
　 the setting
☆ Humidity is adjustable continuously
☆ Heating power displayed on panel
☆ A second thermal cut-off function for more safety
☆ The infant bed inclination angle is adjustable
☆ Trough for pulling and pushing ,which is
　 convenient to add the water and wash
☆ Fan with low noise and long life-span
☆ Temperature deviation and over temperature
　 could be amended in front panel directly
☆ Silence/reset button for alarms
☆ six operating windows,two side operating
　 windows can be swiveled
☆ Heater is electrically cut-out if air temperature
　 inside incubator exceed 40℃
☆ Cabinet with three drawers
Standard configuration
Main body(including the transparent hood,control system,infant bed,water trough),I.V.pole, mattress, cabinet, silence castors.

Optional parts:
　Phototherapy up side unit;
　phototherapy from up and down sides;
　RS232(485)conncector;Tray/pole;
　Infant bed pulled from side door;
　Infant bed pulled from side and front door;
　Double wall hood.

Technical data:
　※ Power supply : AC 110/220V 60/50Hz
　 ※ Power input : ≤420VA

Operating conditions:
　※ Environment temperature: 20℃~30℃
　※ Environment relative humidity: 30%~75%RH
　※ Environment air velocity of flow: <0.3m/s
　※ Air Temperature control range： 25℃~38℃
　※ Temperature fluctuation: +0.5℃
　※ Uniformity of mattress temperature: ≤0.8℃
　※ Humidity accuracy: ≤10%RH
　※ Warm-up time: ≤45min
　※ Internal noise level: ≤55dB
　※ Infant bed tilt angle : +10º
　※ Mattress size: 65cm(L)×37cm(W)
　※ Trough capacity: 1200ml
　※ Air filter:0.5um
Package:
Each unit is packed in two wooden crate:
　 ※Size (control unit and cabinet):120×70×96cm
　　N.W.:80Kg G.W.:110Kg
　※ Hood: 97×56×63cm
　　 N.W.:15Kg G.W.:40Kg
Transport and storage:
　Environment Temp:-10℃--+70℃
　Environment Relative Humidity: ≤80%
　Atmospheric Pressure: 500～1060Hpa