Dental Unit direct from China - Zhengzhou Linker Trading Co., Ltd.
Home» products»Dental Unit

Zhengzhou Linker Trading Co., Ltd.

Select to
Page 2 of 2
  • Dental Unit

    STANDARD ACCESSORIES

    Compensate Dental Unit
    Four-way high speed air turbine H. P. 2sets
    Four-way low speed air motor H. P. 1set
    Three way springe 2sets
    Water suction and saliva ejector 1set
       Powerful suction apparatus 1set each

    Unify move glass spittoon
    Lay in water of insides pot
    Strong and weak operation light
    X-film viewer
    Spirit lock tight Equilibrium Equip
    Multi-function switch feet steps
    Dental stool 1set
    Instrument tray with air brake

    SPECIFICATIONS
    Supply Voltage 220V 50Hz
    Air Pressure Larger than0.55Mpa
    Water Pressure 0.2Mpa-. 04Mpa
    Lowest position of chair 440mm
    Tallest position of chair 860mm
    Chair-back highest 5°
    Chair-hack lowest 85°.

  • Low Speed Handpiece

    EX-203(Air motor)+EX-6(Straight)+NAC-E(Contra-angle)
    -1:1 Direct Drive
    -Midwest 4 hole -Borden 2 hole
    -Max speed 22,000 min-1
    For CA burs (Ø2.35
    Latch type
     

  • X-Ray Unit

    1 The microprocessor-controlled tmer brings high-tech x-ray imaging at your fingertips.
    2 The control panel allows an accurate and fast exposure time selection while protecting the head during x-ray examinations.
    3 Fitted with 70kv 8ma tube with preheating grid, the machine has been specially designed for intra-oral dental diagnosis applications
    4 Complies with local and international regulations on ionizing radiation protection for maximum safety.
    5 The soft positioner arm ensures naturally smooth and well-balanced movements. It is easy installed at the height and length.
    6 Its ergonomics and design have been studied to meet the requirements of the most semanding practices in matters of floor space optimization.
    SPECIFICATION:
    Classification: Electro medical, Class I, type B
    Supply voltage: 220v 50Hz
    X-ray tube: 70kv 8ma
    Total fiteration: 2.5 mmAL
    Exposure time: 0.2 to 2 sec
    Total weight: 35kg


     

  • Dental Unit

    STANDARD ACCESSORIES
    Compensate Dental Unit
    Four-way high speed air turbine Handpiece tube. 2sets
    Four-way low speed air motor Handpiece tube. 1set
    Three way syringe 2sets
    Water suction and saliva ejector 1set
    Powerful suction apparatus 1set each
    Unify move glass spittoon
    Lay in water of insides pot
    Strong and weak operation light
    X-film viewer
    Spirit lock tight Equilibrium Equip
    Multi-function switch feet steps
    Dental stool 1set
    Instrument tray with air brake
    SPECIFICATIONS
    Supply Voltage 220V 50Hz
    Air Pressure Larger than0.55Mpa
    Water Pressure 0.2Mpa-. 04Mpa
    Lowest position of chair 440mm
    Tallest position of chair 860mm
    Chair-back highest 5º C
    Chair-hack lowest 85º C
    OPTIONS ACCESORIES
    Curing light 1set
    Ultrasonic Scaler 1set
    Intra-oral Camera 1set
     

Select to
Page 2 of 2    2 Next>>
Go to Page