Shenzhen Jumper-medical Equipment Co.,Ltd

Multiparameter Monitors 12.1” Display
JPD-800B
Features:
12.1” high Brightness FTF LCD
1-8 Channel Waveform Display
7 Channel ECG Waveform Display;ST Segment analysis;Arrhythmia Analysis
Anti-movement and low perfusion SPO2 Measurement
Pace pulse Detection
Defibrillation and ESU Protection
OxyCRG diagram;Drug Dose Calculation
Blood Dynamics Analysis
Venous Punch
Flexible parameter configuration

Specification:
ECG
ECG Cable:5 Leadwires
Lead Section
Lead I,II,III/AvR,AvL,AvF/Vgain(mm/mV):1/4,1/2,1,2,4
Frequency response:
Diagnosis:0.05-100Hz
Monitor:0.5-40Hz
Surgery:1.0-25Hz
Sweep Speed(mm/Sec):6.25,12.5,25,50
Heart Rate range:0-350 BPM
Heart Rate accuracy:±1%

ST Segment Deviation Analysis:-0.8~+0.8mV
ST accuracy: ±0.02mV
Non-Invasive Blood Pressure
Measurement Type: Adult,Pediatric,Neonatal
Meansurement Range:
Systolic 4.0-270mmHg
Diastolic 20-200mmHg
Mean 30-220mmHg
Accuracy: ±3mmHg or 2%(choice max)
Resolution:1mmHg
Protection:over pressure

Pulse Oximeter
SPO2 measurement range:0-100%
Accuracy: ±2% at 70-100%(No specification under 70%)

Resolution:1%
Pulse measurement range:30-250BPM
Accuracy: ±2% or 1BPM(Choice Max)
Resolution:1 BPM
Respiration Rate:
Measurement Range:0-120 BPM
Accuracy: ±1 BPM or 5%(choice max)
Resolution:1 BPM

CO2:
Measurement Range:
0%-10.0%(in Co2 and et CO2)
Accuracy: ±2 mmHg(<5% Measurement Value)
±10%(>5% Measurement Value)
Response Time:180ms

IBP:
Channel number:2ch
Range:-40-+330mmHg
Accuracy: ±4mmHg or ±4%(choice max)
Resolution:1mmHg

Environment
Operation Storage Temperature:5~40℃
Storage Temperature:-20~70℃
Relative humidity:≤80%
Storage Temperature: ≤95%

Temperature:
Channel number:2ch
Measurement range:25-45℃
Accuracy: ±0.1℃
Resolution:0.1℃
Response time: ≤3 Min
Power requirements:
Input:98-260V AC,50/60 Hz
Consumption: ≤80VA

This is not what I'm looking for.