Shenzhen Jumper-medical Equipment Co.,Ltd

Multi-parameter Patient Monitors 7'/8.4'/12.1'/15' all available

8.4 inch TFT; Resolution: 800*600
ECG , Spo2 , PR , NIBP , RR , Temp

Function
6 display interface
720 hours trend data storage, 12 hours waveform review
Voice alarm
Support wired and wireless networking
Support software upgrade online

Specification

ECG
Leads Mode:5 leads:
Gain(mm/mV): 1/4,1/2,1,2,4
Scanning speed: 12.5mm/s 25mm/ 50mm/s
Frequency response: diagnosis 0.05-130Hz
Monitoring 0.5  40Hz
Operation 1.0- 20Hz
Heart rate range: 15-350BPM
Heart rate accuracy:±1%
ST segment analysis:-0.8-+0.8Mv
ST segment accuracy:±0.02Mv

NIBP
Measure and Alarm Range
Adult Mode
SYS 40 ~ 280 mmHg
DIA 10 ~ 220 mmHg
MEAN 20 ~ 240 mmHg
Pediatric Mode
SYS 40 ~ 220 mmHg
DIA 10 ~ 160 mmHg
MEAN 20 ~ 170 mmHg
Neonatal Mode
SYS 40 ~ 135 mmHg
DIA 10 ~ 100 mmHg
MEAN 20 ~ 110 mmHg
Static pressure range: 300 mmHg
Static pressure accuracy: ±3 mmHg or 2%
Resolution: 1 mmHg
Protection mode: dual over voltage protection

SPO2
Measure range: 1-100%
Accuracy: ±2% (70-100%
Resolution: 1%

Pulse rate
Measure range: 20-300 BPM
Accuracy: ±2 BPM
Resolution: 1 BPM

Temperature
Channel; 2
Measure range: 0-50
Accuracy: ±0.1
Resolution: 0.1

Respiration
Measure range: Adult 120 BrPM
Pediatric/ Neonatal 150 BrPM
Accuracy: ± 2%
Resolution: 1 BPM

IBP(optional)
Accuracy (no sensor); ±2%or1mmHg
Band width: Normal mode: 40Hz
Smooth mode: DC 12.5Hz

ETCO2(optional)
Measure range: 0% - 13%
Resolution: 1 mmHg
Accuracy : &plusmn;2 mmHg @ < 5.0% CO2 (at ATPS)
Respiration: 3 150 BPM

Option
Lead-acid battery (built-in)
Recorder (built-in)
IBP
ETCO2

Ultrasonic Pocket Doppler JPD-100S FDA & CE proved

--------------------------------------------------------------------------------

Ultrasonic Pocket Doppler JPD-100S Series can meet the routine examination requirements of obstetricians, midwives and pregnant woman themselves. JPD-100S is for simple listening to the fetal heart beat. JPD-100S is a split-design with built-in loud speaker. MT-1000C4 built-in record and LCD display. All these models are portable and suitable for home-use, have strong ability of processing fetal heart sound signals.
 
Features

All to one design
Small beautiful appearance
Strong ability of processing fetal heart signals
Invulnerable to outside interference
Power with dry batteries (9V)
The probe taking the principal of fetal ultrasound to collect the fetal heart beat signals of fetus
Broadcast the fetal heartbeat sound through headphones or out with loudspeaker
Can transmit the real-time sound of fetal heartbeat to the computer saving for memory by specialized data lines

JPD-100A
Features
Safe: Ultrasound dosage is under 50% of the standard.
Portable: light measure, handset, portable.
LCD display: LCD display FHR
Loudspeaker: Built-in loudspeaker & clearly
Power off: Auto- power off function.
Working time: Adopt with recharger battery, constantly working 10 hours over when full of recharger.
Durable: Huge capacity battery, work more than 12 hours after full charge.
Convenience: Single key control. Automatic battery recharge and protection.
Sensitivity: Monitor 9 weeks above unborn baby’s blood wall pulsate.
Three model account: Real-time, ten seconds average & handly account the FHR.
Specification
Probe: Solid and durable, anti-shock and anti-falling down.
Power: DC 7.2V
Size: 133mm*85mm*31mm
Weight:Main body 0.12kg
Temperature: 5℃-40℃
Humidity: 0-85%

 

JPD-100T
Features
Safe: Ultrasound dosage is under 50% of the standard.
Durable: Huge capacity battery, work more than 12 hours after full charge.
Convenience: Single key control. Automatic battery recharge and protection.
Sensitivity: FHR of fetus 9 weeks up.
Probe: According to difference of pregnant week, users can select 2.2MHz or 3.3MHz probe.
Specification
Probe: Solid and durable, anti-shock and anti-falloing down.
Ultrasound frequency:3.3MHz or 2.2MHz +3%
Ultrasound intensity: <2.5mW/cm2
Display: LED, display time (second)
Power: AC 220V 50Hz, DC18V.
Rechargeable battery: 1100mAh(can work more than 12 hours continuously)
Size: 240mm*160mm*115mm
Weight:Main body 1.12kg,charger0.64kg

 

JPD-300AI
Feature:
Probe: Solid and durable, anti-shock and anti-falling down.
Multi-fetus: Single fetus,twin fetus,tri-fetus are optional.
Multi-parameter: Real-time Matemal SPO2 and NIBP monitor.
Patent: Special fetus awaking function within FHR probe.
Three to one design: Special three to one design among FHR probe, TOCO probe, fetal movement marker, avoid twisting
Tone: Quality speaker take more clear and loud sound.
System: Operate and control mutually with center monitor.
Specification:
Ultrasound: Multi wafer, wide wave-beam.
Ultrasound frequency: 0.8-2.2MHz+-5%
Ultrasound intensity: <5mW/cm2
TOCO transducer: external transducer
FHR range: 30-210bpm
TOCO range: 0-100 (relative unit)
Power: AC 220V 50Hz
Paper: 112mm thermal
Weight: 3.65KG
Size: 340mm X 310mm X 125mm
Working condition: Temperature 10℃-45℃
Humidity 10-80%
 

JPD-100A
Features
Safe: Ultrasound dosage is under 50% of the standard.
Portable: light measure, handset, portable.
LCD display: LCD display FHR
Loudspeaker: Built-in loudspeaker & clearly
Power off: Auto- power off function.
Working time: Adopt with recharger battery, constantly working 10 hours over when full of recharger.
Durable: Huge capacity battery, work more than 12 hours after full charge.
Convenience: Single key control. Automatic battery recharge and protection.
Sensitivity: Monitor 9 weeks above unborn baby’s blood wall pulsate.
Three model account: Real-time, ten seconds average & handly account the FHR.
Specification
Probe: Solid and durable, anti-shock and anti-falling down.
Power: DC 7.2V
Size: 133mm*85mm*31mm
Weight:Main body 0.12kg
Temperature: 5℃-40℃
Humidity: 0-85%