Shanxi Jerry Medical Instrument Co.,Ltd

Parameters：
Three Parameters：SPO2、TEMP、Pulse Rate.
Waveforms：
Waveform: SPO2 waveform-PLETH

Features：
1、 Compact, small, light, easy for carrying and handling.
2、 LCD display of measurement and PLETH.
3、 Intelligent parameter monitoring interface.
4、 Audio and visual alarm.
5、 Storage and review of patient’s trend data up to 36 hours which is never lost even when power’s off.
6、 Common AA alkaline or rechargeable batteries to support 7 continuous working hours;
7、 Battery capacity indicator.
8、 Automatic power-off
9、 Patient’s trend can be transmitted to a personal computer for display, saving and printing.
10、 Suitable for adult, pediatric, infant and neonate patients;

Applications：
It is widely used in the hospital’s operation room, ICU, clinic section office, outpatient department, sickroom, emergency treatment, and the recovery and health care organizations, or in the family nursing and in the process of transporting patients.
Standard Packing List：
Handheld SpO2/TEMP patient monitor main unit 1pc
Adult finger SpO2 sensor 1pc
Surface TEMP probe 1pc
Communication cable 1pc
The operator’s manual 1pc

Selectable Accessory:
pediatric soft tip SpO2 sensor、Neonate/infant wrap SpO2 sensor

The pulse oximeter is a non-invasive, handheld patient pulse oximeter. It operates only on Common 1.5V AA alkaline or rechargeable battery power. It is compact, small, light, and easy for learning and handling. It is suitable for pulse oximetering adult, pediatric, infant and neonate patients. It is widely used in the hospital’s operation room, ICU, clinic section office, out-patient department, sickroom, emergency treatment, and the recovery and health care organizations, or in the family nursing and in the process of transporting patients. It can also apply to animals selectively.
Parameters measured by the pulse oximeter include: arterial oxygen saturation (SpO2), pulse rate (PR), pulse strength. The pulse oximeter measures these parameters through a SpO2 sensor and displays them on the LED screen after certain further processing.
The pulse oximeter is operated and controlled by the buttons on the front panel. It adopts LED in displaying measurements and in supplementary status indication.
The pulse oximeter has the following functions:
■ Measuring: Display of SpO2, PR and pulse strength.
■ Prompting: Battery capacity.
■ Alarm: Judgment of exceeding the limits, Audio and visual alarm.
■ Power saving: Automatic shutdown when no pulse oximetering.
Standard Packing List:
■ Pulse Oximeter main unit 1pc
■ Adult finger SpO2 sensor 1pc
■ The operator’s manual 1pc
Selectable Accessory:
■ pediatric soft tip SpO2 sensor
■ Neonate/infant wrap SpO2 sensor
■ Ear clip SpO2 sensor

Parameters:
Three Parameters:SPO2,TEMP, Pulse Rate.
Waveforms:
Waveform: SPO2 waveform-PLETH

Features:
1. Compact, small, light, easy for carrying and handling.
2. LCD display of measurement and PLETH.
3. Intelligent parameter monitoring interface.
4. Audio and visual alarm.
5. Storage and review of patient's trend data up to 36 hours which is never lost even when power's off.
6. Build-in rechargeable Ni/MH battery.
7. Battery capacity indicator.
8. Automatic power-off
9. Patient's trend can be transmitted to a personal computer for display, saving and printing.

Applications:
SPO2 and TEMP Patient Monitor can be applied in the hospital's operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.

Standard Packing List:
Handheld SpO2/TEMP patient monitor main unit 1pc
Adult finger SpO2 sensor 1pc
Surface TEMP probe 1pc
AC power adaptor 1pc
Communication cable 1pc
The operator's manual 1pc

Selectable Accessory:
Child finger/toe SpO2 sensor

Parameters:
Two Parameters:SPO2, Pulse Rate.
Waveforms:
No Waveform.
Features:
1. Small, light, easy for carrying and handling.

2. Brightness LED displays, easy to read, and the brightness can be adjusted.

3. Build-in rechargeable Ni/MH battery, longtime operating time.

4. Audio and visual alarm, and alarm limit can be set.

5. Automatic Power-off.

6. Battery capacity indicator.

Parameters:
Four Parameters: NIBP,Pulse Rate,SPO2,TEMP.
Waveforms:
SPO2 waveform

Features:
1. Intelligent monitoring NIBP,SPO2,PR,Pulse Strength,PLETH and TEMP;
2. Bright and clear LED and LCD display ;
3. Compact,light for handing and easy operation;
4. Audio and visual alarm when sensors off or alarm limit exceeded;
5. Storage and review of patient's NIBP data up to 900 groups and SPO2,TEMP trend data up to 3150 groups.The data is never lost even when power's off;
6. Three kinds of power supply, AC Power, Build-in rechargeable Li-ion battery and Common AA alkaline or rechargeable batteries;
7. Automatic shut down,shut down time adjustable from 2~15Min ;
8. History data uploading to a personal computer for display,observing and printing;
Applications:
This model can be applied in the hospital's operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.
Standard Packing List:
NBIP/SPO2 Patient Monitor main unit 1pc
NIBP extension tube 1pc
Adult NIBP cuff 1pc
Adult SPO2 Sensor(include TEMP Probe) 1pc
AC power adaptor 1pc
Communication cable 1pc
The operator's manual 1pc
Selectable Accessory:
Pediatric NIBP cuff
Pediatric SPO2 sensor

Parameters：
Three parameters：NIBP, SPO2, Pulse Rate.
Waveforms:
No waveform.

Features：
1、 Compact, light, easy for carrying and handling.
2、 Large bright LED display of measurement, easy to read.
3、 Unique character and icon display of information, easy for setting and watching.
4、 Storage and review of NIBP and SpO2 data up to 800 groups.
5、 Build–in rechargeable LI-battery for 10 working hours.
6、 Low battery power indicator.
7、 Automatic power-off.
8、 Audio and visual alarm.
9、 External printer available.

Applications：
This product can be applied in the hospital’s operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.

Standard Packing List：
1. NIBP＆SPO2 Patient Monitor main unit 1pc
2. Adult finger SpO2 sensor 1pc
3. Adult NIBP cuff 1pc
4. Child NIBP cuff 1pc
5. NIBP extension tube 1pc
6. AC power adaptor 1pc
7. The operator’s manual 1pc

Selectable Accessory：
Child finger/toe SpO2 sensor