Nanjing FoiNoe Company

This x-ray unit is mobile full-wave x-ray unit. It can perform general radiography and ward radiography.

This x-ray unit adopts high voltage silicon full wave commuting technique. Compared with half-wave commuting x-ray unit, it has higher efficiency of the x-ray tube lower supply requirement and better resolution. It’s electricity consumption is only 2/3 of the half-wave unit which had the shortcomings of high reverse peak voltage.

This x-ray unit posses light and audio double indication systems for radiography, which gives the operators and patients more convenience and flexibility.

This x-ray unit had the x-ray had the x-ray tube capacity protective indicating devices. When the capacity is over the highest, the exposure does not take place so as to avoid the x-ray tube’s damages in case of the wrong operation during the radiography.

This x-ray unit is equipped with a foldable fluoroscopy screen. While performing beside radiography the arm of the x-ray tube can circumgyrate 90°. This x-ray unit with a light mobile cart can be easily brought into wards by the operators for use.

This x-ray unit also has remote control for exposure. During radiography, operators can use either hand control or remote control according to the requirements of doctors.

Technical data
1. The unit is of single-focus, whole-wave commuting, Oil-inner, self-cooling, mobile diagnostic-X-Ray unit.
2. Maximum rating
Current (mA) Voltage (kVp) Exposure tine (second)
30 90 0.063~5.0
50 90 0.063~1.0
80 0.063~2.5
70 70 0.063~1.0


3. Power supply
Voltage: 180~250V
Frequency: 50Hz
Power Line ohm= 0.8Ω
rating: 5.5KVA
Current: ＜24A (instant)

4. Timer 0.063~5.0s 20 step electron type
5. X-ray tube focus 2.6mm
6. Maxim height of focal spot from floor ＞ 1820mm
7. Minimum height of focal spot from floor ＜550mm
8. Collimator: Maximum film size at 650mm focal distance: 350mm*350mm
9. Unit moving force: ＜5kg The net weight of the unit: 95kg