Member Since Jul 2009

Changsha Epower Electronics & Science, CO.,LTD

Select to

Page 1 of 1

Multi-parameters Monitor

XB-1008 multi-parameters moitor is specially designed for the monitoring application in the ICU/CCU and ICU for adlt, pediatric and neonatal patient to achieve maximum flexibility and optimum performance. The intelligent monitoring, alarming, TCP/IP networking and many other features will provide easy, integrated monitoring in any application.

High-performance monitoring for flexible care settings:

1, 12.1' color TFT LCD screen supports display max. 8 waveforms

2, Personated voice reminding alarm; Visual On-display and integrated alarm light

3. Real time S-T segment analysis, pace detection and arrhythmia analysis

4. Drug calculation and titration table

5. Extended advance function: IBP, BIS, EtCO2, Multi-Gas/ O2

6. Suitable for monitoring adult, pediatric and neonatal patient.

7. Display mode: Standard, Large Font, NIBP Trend, Trend Table, Full lead ECG, Oxy CRG.

8. 720 hours of graphic and tabular trends of all parameters

Standard Configuration:

Anti-glare screen, Lithium battery, 5-Lead ECG, Respiration, NIBP, SpO2, Pulse Rate, Temperature

Optional Configuration:

2IBP, Depth of Anesthesia Monitoring Module (BIS), EtCO2 (Side stream CO2), Multi-Gas/ O2

VGA, Thermal printer (50 mm)

Pediatric / neonatal accessories: reusable NIBP cuff & SpO2 probe; disposable NIBP cuff & SpO2 probe
PM-9000E+ Fetal Maternal Monitor

PM-9000E+ Fetal Maternal Monitor

Fetal Heart Rate

l           Probe: nine-unit, wide range, pulse wave, high sensitivity

l           Signal Strength:             < 1 mw/cm2

l           Frequency:                      1.0 MHz

l           Signal processing:         DSP processor

l           Max Sound Power:        1.5 watt

TOCO Pressure

Measure Range:      20 – 100

Pressure ultrasonic probe output

In accordance with international practice IEC1157 1992, the peak negative pressure less than 1 Map (Map). Beam intensity is less than 20 mW / cm 2 (mW/cm2). Space instantaneous peak intensity average density is less than 100 mW / cm 2 (mW/cm2). The type of sound intensity less than 1mW/cm2

Coupling agent (GEL)

Viscosity of water-based compounds no stimulates to the skin, no allergies. Chemical stability, inhibit bacteria.

ECG measurement：

Leads choices: All, I, II, III, aVF, aVR, aVL. V1--6 chest leads showed

Gains options:   × 1, × 2, × 4, and × 0.5 four trenches

Frequency: 0.5 Hz - 100 Hz

Common-mode signal inhibition: More than 70 dB

Scan rate: 12.5 mm / S, 25 mm / S, 50 mm / S standard three stalls.

HR: ± 5 bpm

Precision calibration signal: 1mv(peak, ± 3% accuracy)

ST Detection: measurement range (-1.0mV----+1.0mV)

Using Standard: meet the ANSI / AMI EC13 -1992 standard

Response time: 1s

Alarm: Sound and Light

Preset heart rate range: (Alarm over preset numerical)

Ceiling:       1-250 bpm adjustable

Threshold:     0-249 bpm adjustable

NIBP measurement

Technology: Oscillometric

Mode: manual / automatic

Measurement units: mmHg / kpa

Protection: Double security protection

A measurement time: less than 45 S

Scope: Pressure Cuffs 0-250 mmHg

Blood pressure measurement accuracy: ANSI /AAMI, SP10-1992 standard error and standard deviation of the average value of the initial

Inflatable cuffs: 180 mmHg (120 mmHg newborn   children 70 mmHg)

Inflatable cuffs follow: original SBP: + 30 mmHg

Blood pressure measuring range:

Systolic blood pressure: 60-250 mmHg

Diastolic blood pressure: 40-220 mmHg

Pressure on the average: 45-235 mmHg

Response time: 1s

Alarm: Sound and Light

Preset range: report (Numerical exceed preset alarm)

Systolic blood pressure maximum: 1-255 mmHg adjustable

Threshold: 0-254 mmHg adjustable

Diastolic blood pressure ceiling: 1 -255 mmHg adjustable

Minimum standards: 0 -254 mmHg adjustable

Use standard: compliance with the ANSI / AAMI SP10-1992 standard

Spo2 measurement

Range: 0-100%

Accuracy: 1%

Resolution: 1%

Pulse frequency: 20-250 times / min

Response time: 1s

Alarm: Sound and Light

Preset range: report (Alarm over preset numerical)

Ceiling:      1% - 100% adjustable

Threshold:   0% - 99% adjustable

TEMP measurement:

Technology: thermostat temperature probe temperature

Measuring range: 20 ° C-45 ° C

Temperature resolution: 0.1%

Accuracy: ± 1 ° C

Response Time: 1s
PM-9000AI Multi-parameter Patient Monitor

PM-9000AI Multi-parameter patient Monitor

PM-9000AI Multi-parameter patient Monitor

ECG measurement;

Leads choices: All, I, II, III, aVF, aVR, aVL. V1--6 chest leads showed

Gains options:   × 1, × 2, × 4, and × 0.5 four trenches

Frequency: 0.5 Hz - 100 Hz

Common-mode signal inhibition: More than 70 dB

Scan rate: 12.5 mm / S, 25 mm / S, 50 mm / S standard three stalls.

HR: ± 5 bpm

Precision calibration signal: 1mv(peak, ± 3% accuracy)

ST Detection: measurement range (-1.0mV----+1.0mV)

Using Standard: meet the ANSI / AMI EC13 -1992 standard

Response time: 1s

Alarm: Sound and Light

Preset heart rate range: (Alarm over preset numerical)

Ceiling:       1-255 bpm adjustable

Threshold:     0-254 bpm adjustable

RESP Breath

Breathing frequency range: 0-60 bum

Accuracy:    ± 1brpm

Response   time: 1s

Gains options: × 1, × 2, × 4, and × 0.5 four trenches

Alarm: Sound and Light

Alarm   range:    (numerical preset alarm over)

Ceiling:       10-100 bpm adjustable

Threshold:     0 -99 bpm adjustable

NIBP measurement

Technology: Oscillometric

Mode: manual / automatic

Measurement units: mmHg / kpa

Protection: Double security protection

A measurement time: less than 45 S

Scope: Pressure Cuffs 0-250 mmHg

Blood pressure measurement accuracy: ANSI /AAMI, SP10-1992 standard error and standard deviation of the average value of the initial

Inflatable cuffs: 180 mmHg (120 mmHg children   newborn 70 mmHg)

Inflatable cuffs follow: original SBP: + 30 mmHg

Blood pressure measuring range:

Systolic blood pressure: 60-250 mmHg

Diastolic blood pressure: 40-220 mmHg

Pressure on the average: 45-235 mmHg

Response time: 1s

Alarm: Sound and Light

Preset range: report (Numerical exceed preset alarm)

Systolic blood pressure maximum: 1-255 mmHg adjustable

Threshold: 0-254 mmHg adjustable

Diastolic blood pressure ceiling: 1 -255 mmHg adjustable

Minimum standards: 0 -254 mmHg adjustable

Use standard: compliance with the ANSI / AAMI SP10-1992 standard
Fetal Maternal monitor

XB-10E Fetal Maternal monitor
Description;
Unicare XB-10E are high-tech Fetal Maternal monitor, it offers a reliable, high-performance solution for fetal monitoring needs in doctors’ practices, clinics and hospitals, from pre-natal check-ups to antepartum monoring of high-risk pregnancies

Feature
Folded 12.1inch TFT LCD high-brightness screen with a wide viewing angle and large numerics
12 elements / 1 MHz water proof pulse Doppler transducer for accurate detection
Event marker for easy documentation of events and kick counts
Fetal Movement Profile (FMP) detects and automatically records gross fetal body movements
On-screen scrolling for viewing stored fetal traces
Twin ultrasound monitoring capability
Configurable audible and flashing fetal heart rate alarms
Twin signal overlap alarm function
Built-in high speed thermal printer, printing width can be set to 112mm,150mm and 210mm
24-hours memory for fetal traces
Supporting TCP/IP or wireless connection to the central monitoring station
Internal Li-ion battery power or AC power from external power supply
Fetal/maternal Monitor Station

Fetal/maternal monitor station

--Optional perinatal comprehensive information management software

--The database is greater than or equal to 10 million records, store the information of pregnant women, CTG and mother's vital signs trends

--24-hour playback CTG and maternal vital signs trends

--To view CTG in omnidistance in order to quick know the whole situation of monitoring, you can choose excerpts to diagnose or print.

--The maternal and fetal parameters could alarm, alarm limits is adjustable, sound and light alarm, 3 class alarm.

--Printing could support Chinese standard/ American standard /European standard formats and supports A4/B5 etc, paper.

--Support split-screen formats, such as top to bottom, left and right split screen display, can to observe the key bed in convenience.

--Can be arbitrarily to extended network port

--Green Wireless Network

--Save function with power-down
PM-9000B Fetal Monitor

PM-9000B Fetal Monitor

General parameters

Size: 300mm× 230mm ×130mm

Weight: 2.5Kg (excluding accessories and embedded batteries)

Display screen: 10.4 inch TFT Color LCD Flat

Resolution: 640× 480

Mode: continuous operation

Supply voltage: AC 220V ±10%, 50Hz

Power: less than 20W

Ambient temperature: 10 ° C-40 ° C

Relative humidity: 10-80%

TOCO Pressure

Measure Range:      20 - 100

Pressure ultrasonic probe output

In accordance with international practice IEC1157 1992, the peak negative pressure less than 1 Map (Map). Beam intensity is less than 20 mW / cm 2 (mW/cm2). Space instantaneous peak intensity average density is less than 100 mW / cm 2 (mW/cm2). The type of sound intensity less than 1mW/cm2

Fetal Heart Rate

Probe;                nine-unit, wide range, pulse wave, high sensitivity

Signal Strength:                 < 1 mw/cm2

Frequency:                          1.0 MHz

Measuring range: 60-210 bpm

Signal processing:    DSP processor

Max Sound Power: 1.5 watt

Select to