Shenzhen Comen Medical Instruments Co., Ltd.

12.1 Large-screen Color TFT Display
Light Weight and Portable, Easy Operation Mode
Maximum 11 Hours Storage and Replay of Monitoring Data
Built-in High-capacity Battery, Up to 7 Hours Working Time
Advanced Digital Signal Processing (DSP) Technique is Applied for Real-time Calculation and Mode Identification;
High-sensitive Probe, Excellent Signal/Noise Rate and Calculation Accuracy Enable to Monitor Fetus More Safely
Intellectualized Voice/Light Alarms Accurately Transmit Diseases
Built-in Recorder, Able to Print or Store Waveforms and Monitoring Status at Real Time
Network Capability, Compatible with Obstetric Central Monitoring System
Standard Configuration
FHR
TOCO
FM
Battery

Optional Configuration
Build-in Printer
Twin

Technical Parameters
TOCO
Range: 0-100 Pressure Units
Nonlinear Tolerance for Measurement: ± 5%

FHR
Probe: 9 Chips, Wide Wave Packet, Pulse Wave
Strength of Ultrasonic Wave: ≤ 3mW Cm2
Working Frequency: 1.0MHz or 2.2MHz
Signal Processing: Special Digital Signal Processing (DSP) and Mode Identification
Range: 10-240bpm

FM Counting Method
Manual

Printer (Optional)
Type: Built-in 50mm Thermal Printer
Port: Standard Parallel

Safety Specification
In Compliance with IEC60601 and GB9706 Related Standards

Weight: 5.5kg

Dimension: 320mm(W)x280mm(H)x170mm(D)
Power Requirement
Voltage: AC100-240V 50HZ/60HZ

Standard Accessories: 1 x Three -in -One Probe (FHR, TOCO, FM), 1 x Biding Belt, 1 x Caster Oil, 1 x Ground Line

Optional Accessories: Build-in Recorder