Luer slip: 1ml, 2ml, 3ml, 5ml10ml, 20ml, 50ml
Luer lock: 3ml, 5ml, 10ml, 20ml
Catheter tip: 50ml, 60ml
General specifications:
Sterile, single-use, non -toxic, pyrogen- free
The high transparency of the barrel offers the end user a strict control of the mixture and of the liquid flow.
The graduation of black indelible color permits an easy reading
The special treatment by silicone of medical grade guarantees a safe, regular sliding of the piston
The distance finger grips/barrel, according to the ISO standards, guarantees an easy grip. The syringes, Luer or Luer Lock nozzle, (ISO standard 594- 1/2) permit to adapt and/or block on the needle hub.
Components specifications:
Barrel made of medical, transparent polypropylene with plunger retention ring.
Plunger made of medical polypropylene
"Standard" Piston with two natural rubber retaining rings,
Cannula made of stainless steel AISI 304; Diameter and length according to ISO standards 9626.
Needle hub made of medical grade polypropylene colored according to ISO standards 6009
Needle protector made of transparent, medical grade polypropylene
Lubricant: Medical grade silicone (ISO 7864)
Graduation: Indelible according to the ISO standards
Blister: Medical grade paper and plastic film

XB-1101 syringe pump is a kind of intellectualized automatic infusion device which is designed for delivery of vein by a constant flow rate. The product can be applied to clinical application of intravenous Injection. It is characterized by precision of dosage rate, sufficient function and simple operation.

Functions and Features:
(1) Operation modes: Flow rate controlled infusion mode, volume and time controlled infusion mode.
A) flow rate controlled infusion mode: There are seven flow rate units of available such as ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
B) Volume and Time Controlled Infusion mode: It enables the users to control the infusion by setting the desired volume and the desired time to be infused, it will be the assistance to the traditional manual injection.
(2) Bolus function: Help patients to past the stimulative phase safely and steadily.
(3) KVO function: Automatically start the KVO(keep the vein open) infusion when the normal infusion stopped.
(4) Non-volatile memory: The pump memories all the setup parameters and history data of the last infusion.
(5) Alarm and Warns: When something abnormal occurs, the pump can give out alarming and warning information such as AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged etc.
(6) Available syringe: All kinds of syringe whose standard capacity is in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting. And the infusion accuracy can be guaranteed.SPECIFICATIONS:
Range of Flow rate: 10ml syringe: 0.1~300ml/h;
20ml syringe: 0.1~400ml/h;
50(60)ml syringe: 0.1~600ml/h;
Accuracy: +/-3% (on condition that the total infusion capacity is more than 5.0ml and the infusion rate is more than 2.0ml/h and the syringe extension set have been purged)
Bolus rate: 300ml/h
Display: A large screen (128*64 pixel), rotary setting with convenient operation interface.
Operating conditions:
Ambient temperature: +5~+40C
Relative humidity (RH): 30 %~75 %
Power supply:
AC: 100V~245V\50 +/-1Hz
Battery: 14.4V battery can use for more than 3 hours after charged for 10 hours.
Atmospheric pressure: 860~1060hPa
Dimension (mm): 336(L)*153(W)*132(H)
Weight: 2.5kg
Safety Classification: Class II and Type C

Introduction:
XB-800 Syringe Pump syringe pump is routine use equipment for hospital emergent treatment, cure and nursing. It adopts the new technology of microcomputer with compact structure. It has multi-intelligent alarm functions, could use disposable syringe of many kinds of, strong functions and use convenient. It is especially suitable for exact micro infusion or quick infusion for long time. This product is use for push the syringe to control the liquid amount into patient body for medical institution.
1. Work Condition
1.1 Ambient temperature: +5c---- 40c
1.2 Relative humidity: 20%~90%
1.3 Power supply: AC220V 22V, 50Hz
1.4 Built-in batteries: 12V, 1.2h/A (Undervoltage value ≤ 10.5V)
It can be used for 2 hours continuously after 24 hours full charged.
1.5 Atmospheric Pressure: 860hpa~1060hpa
1.6 Storage Temperature: -40c~+55c
2. Basic Parameters
2.1 Dimensions (mm): 320 (L)/145(W)/120(H)
2.2 Weight: Approximately 3 kg
2.3 Power Consumption: ≤19.8VA
2.4 Compatible Syringe Size: 10ml, 20ml, 30ml, 50ml Disposable
2.5 Infusion Flow Selection: 0.1~199.9ml/h, original value is 0.1ml/h
2.6 Infusion Range: 0.1~999.9ml, original value is 0.1ml
2.7 Occlusion Pressure: 40K~70K pa
2.8 Flow Rate Precision: 5%(0.1ml/h≤Flow Rate≤50ml/h)
/3%(50ml/h≤Flow Rate≤199.9ml/h)
2.9 Alarm: Self-Test, Occlusion, Nearly Finish, Finish, Low battery,
Standby, Move
2.10 Functions: Syringe's Type Test, Transfusion amount display, Flow rate display, Power display, Auto-Alarm, KVO function

After power off, the electrical memory function keeps for five years
(Only effective for setting content)

Product introduction
XB-1301 stackable syringe pump is a kind of intellectualized automatic infusion equipment which makes use of the integration of the technology of micro-processor control and precise manufacture. It is available for performing an intravenous infusion and the lab scientific research. It is characterized by accurate infusing, sufficient function and simple operation. Functions and features:
(1) Operation modes: Flow rate controlled infusion mode. Volume and Time controlled infusion mode, Total intravenous anesthesia infusion (TIVAI)mode.
A) flow rate controlled infusion mode: It enables the users to control the infusion by setting the flow rate. There are seven flow rate units of available such as ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min .
B) Volume and Time Controlled Infusion: It enables the users to control the infusion by setting the desired volume and the desired time to be infused。
C) Total intravenous anesthesia infusion (TIVAI) mode: The infusion is controlled by the setting the first dose, the time need for the initial infusing dose and the maintain infusion rate. It is a function likes target control infusion ,this make drug dispensing more convenient and safer.
(2) Bolus function: help patients to past the stimulative phase safely and steadily.
(3) KVO function: Automatically start the KVO(keep the vein open) infusion when the normal infusion stopped.
(4) Alarm and Warns: when something abnormal occurs, the pump can give out alarming and warning information such as AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion ,end of infusion, Syringe disengaged etc.
(5) Available syringe :all kinds of syringe whose standard capacity is in the standard capacity set 10ml,20ml,50(60)ml can be used in the pump by custom syringe’s setting. And the infusion accuracy can be guaranteed.
(6) Modular design, designed for both stationary and mobile use freely. The pumps can be assembled to a unit to save room or mounted independently. SPECIFICATIONS:
Range of Flow rate: 10ml syringe: 0.1~300ml/h;
20ml syringe: 0.1~600ml/h;
50(60)ml syringe: 0.1~1200ml/h;
Suitable Syringe: all the syringe in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe’s setting.
Accuracy: ±3% (on condition that the total infusion capacity is more than 5.0ml and the infusion rate is more than 2.0ml/h and the syringe extension set have been purged)
Bolus rate: 300ml/h
Display: A large screen (192×64 pixel), rotary setting with convenient operation interface.
 

XB-1201 dual Target-Controlled Infusion Syringe Pump is a intellectualized automatic infusion device, The pump makes good use of the 32 bit CPU and built-in intellectualized operation system, It has a powerful performance of calculation and good expansibility of functions. It has two syringe drive systems which can delivery drugs independently and cooperatively.

Functions and Features:
(1) Operation modes: Flow rate controlled infusion mode, volume and time controlled infusion mode, intermittent infusion mode.
A) Flow rate controlled infusion mode: It enables the users to control the infusion by setting the flow rate. There are seven dose rate units of available such as ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
B) Volume and Time Controlled Infusion: It enables the users to control the infusion by setting the desired volume and the desired time to be infused.It will be the assistance to the traditional manual injection.
C) Intermittent Infusion mode: It enable the user to control the infusion by setting the flow rate to be infused, volume to be infused per interval, intermitted time per interval, and KVO rate during intermitted time. It is fit for infusing the drugs which has long effect duration.
(2) Bolus function: help patients to past the stimulative phase safely and steadily.
(3) RS-232 communication: it enables the history data to be transmitted from pump to PC
(4) Alarm and Warns: when something abnormal occurs, the pump can give out alarming and warning information such as AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged, check syringe etc.
(5) Available syringe :all kinds of syringe whose standard capacity is in the standard capacity set 10ml,20ml,50(60)ml can be used in the pump by custom syringe’s setting .And the infusion accuracy can be guaranteed.


SPECIFICATIONS:
Range of Flow rate: 10ml syringe: 0.1~300ml/h;
20ml syringe: 0.1~600ml/h;
50(60)ml syringe: 0.1~1200ml/h;
Suitable Syringe: all the syringe in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe’s setting.
Accuracy: ±3% (on condition that the total infusion capacity is more than 5.0ml and the infusion rate is more than 2.0ml/h and the syringe extension set have been purged)
Bolus rate: 300ml/h
Display : A large Screen(320×240pixel), rotary setting with convenient operation interface.
 

Introduction: XB-800 syringe pump is routine use equipment for hospital emergent treatment, cure and nursing. It adopts the new technology of microcomputer with compact structure. It has multi-intelligent alarm functions, could use disposable syringe of many kinds of , strong functions and use convenient. It is especially suitable for exact micro infusion or quick infusion for long time. This product is use for push the syringe to control the liquid amount into patient body for medical institution.
1. Work Condition
1.1 Ambient temperature: +5℃ ---- 40℃
1.2 Relative humidity: 20%~90%
1.3 Power supply: AC220V±22V, 50HZ±1HZ
1.4 Built-in batteries: 12V, 1.2h/A (Undervoltage value ≤ 10.5V)
It can be used for 2 hours continuously after 24 hours full charged.
1.5 Atmospheric Pressure: 860hpa～1060hpa
1.6 Storage Temperature: -40℃～+55℃
2. Basic Parameters
2.1 Dimensions (mm): 320 (L)×145(W)×120(H)
2.2 Weight: Approximately 3 kg
2.3 Power Consumption: ≤19.8VA
2.4 Compatible Syringe Size: 10ml, 20ml, 30ml, 50ml Disposable
2.5 Infusion Flow Selection: 0.1～199.9ml/h, original value is 0.1ml/h
2.6 Infusion Range: 0.1～999.9ml, original value is 0.1ml
2.7 Occlusion Pressure: 40K～70K pa
2.8 Flow Rate Precision: ±5%（0.1ml/h≤Flow Rate≤50ml/h）
±3%（50ml/h≤Flow Rate≤199.9ml/h）
2.9 Alarm: Self-Test, Occlusion, Nearly Finish, Finish, Low battery,
Standby, Move
2.10 Functions: Syringe’s Type Test, Transfusion amount display, Flow rate display, Power display, Auto-Alarm, KVO function