Size2100×480×800(1050)mm
Forward≥30°
Retrovert≥25°
Side towards≥18°
Head board fold upward≥45°
Head board fold downward≥90°
Back board fold upward≥75°
Back board fold downward≥18°
Leg board fold downward≥90°
Waist board lifting≥120mm

Intended for surgical operations, on head neck. pleuroperitoneal cavity, perineum, limbs etc. in hospitals. Oil pump provides hydraulec elevat on; operating table controlled on the two sidles to achieve the tequired position.XXS3008C boasts double beds legs can be separated tortilming leg board dischargeable, traction trame can be used to conduot bone surgery.

Technical parameters

Size2100×480×800(1050)mm
Back board fold upward≥90°
Back board fold downward≥20°
Head board fold upward≥45°
Head board fold downward≥90°
Leg board fold downward≥90°
Waist board lifting≥120mm

This table is suitable for surgical procedures of the head, neck, thorax and abdomen, perineum and extremities as well as for gynaeeological, otorhino laryngologiecal and orthopaedics operations It is characterized by versatility, easy operation,practical,good and cheap.

This table is suitable for surgical procedures of the head, neck, thorax and abdomen, perineum and extremities as well as for gynaeeological, otorhino laryngologiecal and orthopaedics operations It is characterized by versatility, easy operation,practical,good and cheap.

Technical Data:
Size: Length-----2000mm width-------480mm
Max Height-----1000mm Min Height-----750mm

1. Reversed Trendel enburg: ≥40°
2. Trendel enburg: ≥15 °
3. Left Tilting: ≥20 °
4. RightnTiliting: ≥15 °
5. Back Section Raised: ≥70°
6. Back Section Loewered: ≥15 °
7. Leg Section Lowered: ≥90 °
8. Supply: AC 220V± 100 50hz
9. Volume: 139× 77× 107cm

This operation table is an electric controlled, mechanical driven multi-purpose operation table. The most remarkable features of this operation table include easy operation, long service life, and long maintenance free period, which can be widely employed for operation in different parts of the body.

1. Dimensions of Table : 2000(L)×(W)500mm

2. height of bed surface: Minimum height :650      Maximum height :900

3. before and after inclination of bed surface : Front inclination:25°     Back inclination :25° (Electric)

4.left and right inclination of bed surface :left inclination :20°         right inclination :20° (Electric)

5. Backplane Fold angle : Rise 80°    Lower25° (Electric)

6. Head Section MovementRise 45°    Lower90°  (Manual)

7. Leg Section MovementRise 0°    Lower 90°  (Manual)

8. Lumbar Bridge Movement height :0~120     (Manual)

9. Power Supply Voltage AC220V (50HZ)