Sickle-arm Digital Radiography System YSDR03
The unique Sickle arm support system, is an affordable DR solution designed for all radiography environments. it can satisfied vertical position, lying position, sitting position and each kind of special helmet angle`s filming request, Extremely good counterweight balance design, reliable electromagnetism locks control device, operates cleverly, continuously adjustable SID in each kind of body position to obtain the perfect camera shot effect. Used in digital x-ray and a general health check-up, skull, abdomen, back. This DR system CCD detector compares with ordinary CCD detector has a higher sensitivity and more superior image quality, compares the flat detector has the longer service life and a higher reliability, higher spatial resolution and extremely low use-cost.The high voltage generate equipment: uses the import generator which has 36-50kw isopotential high voltage, Its output electric power is extremely stable, guaranteed the image clear and trenchancy, it also has malfunction automatic detection software, built-in 99 kinds of exposures patterns, so the operation is convenience and the performance is stable.X-ray tube: use the import high speed revolve bifocus X-ray tube, in the real-time the high voltage generator can examination the X-ray tube's running status and achieves the best movement guarantees the image output the low noise.
Imaging detector specifications:
1. Detector Array :Full field, single VHD CCD
2. Active Image Size :35 cm x 43 cm (14" x 17")
3. Pixels :4,096 x 4,096 (16 Megapixel) 3,056 x 3,056 (16 Megapixel)
4. Pixel Size (element pitch): 108 microns
5. Spatial Frequency (Nyquist) : 4.6 lp/mm 3.4lp/mm
6. Bit Depth : 16bit capture
7. Fill Factor: 100%
8. AEC:3 field
9. Preview Image : Less than 6 seconds
10. Processed Image Display Approximately 10 seconds
11. Acquisition Cycle Time: Immediately upon display of previous image
Allocation Table
Apellation
specification and explanation
QTY
500mA high-frequency X-ray
36-50kw high frequency generator
1
Toshiba tube;
360℃expansion U style of arm and flat bed;
grid; ratio:1:8; 180line/inch; 1.8m/1.0m;
Manual Collimator;
console: The programmable exposure technology contains 99 kind of procedures
Image detector
980A
1
Vertical Stand Dedicated power
12V Vertical Stand Dedicated
1
USB Data transmission line
12.8 meters high-speed USB Data transmission line
1
Image acquisition workstation (lowest configuration)
3.0G CPU, 17 inch high resolution LCD, 1G memory, 80G hard disk, 100M net card, DVD-R/RW
1
Image acquisition software
patient registration, image acquisition, cutting, negative image, image turning over, revolving, contraction and release, tagging, translation, demonstration, image window width and position adjustment, dicom image transmission, dicom film printing , worklist function, statistical inquiry image dedicated processing technology
1
Image processing technology for special-purpose
Dynamic range optimizationt echnology：
1
automatically carries on the compression on
the primitive image dynamic curve, achieving
image characteristic that doctor is familiar with,
being convenient to diagnosis
High-frequency image enhancement technology:
strengthen image contrast , enhance detail
resolution, remarkably enhance high-frequency image
quality of the bone trabecula, demonstrating more perfect.
Noise abatement technology:
automatically filtrate mixed frequency signal data ,
obviously reduces the image noise, Enhance image signal
noise ratio, improved the image quality.
Edge enhancement technology:
automatically diagnostic and analytic image data, enhance image edge sharpness to make the image clearly
Digital image workstation software
DICOM receiving, transmission, inquiry, storage, film printing, report printing
1
ZK-PACS/RIS and IBM server
including the whole function of PACS/RIS
1
