Powder coated steel wheelchair, black nylon upholstery(flame retardant), Fixed full armrest, swing away footrest, 8"*1" front rubber solid tyre, 24" rear mag wheel, With height adjustable footrest and plastic footplate.

Specification:
Seat Width: 16", 18"
Seat Depth: 16"
Seat Height: 19.5"
Overall with: 24.81"
Overall length: 38.58"
Overall height: 36.22"

N. W.: 18KGS (40 lbs)
G. W.: 21 KGS (46.2lbs)
Weight capacity: 114 KGS (250 lbs )
Box size: 0.83*0.25*0.92 CBM
Q'TY/CASE: 1 PC/CASE
20'GP, 40'GP, 40'HC Q'TY: 154/308/340 PCS

Powder coated steel wheelchair, black nylon upholstery(flame retardant), Fixed full armrest, swing away footrest, 8"*1" front rubber solid tyre, 24" rear mag wheel, With height adjustable footrest and plastic footplate.

Specification:
Seat Width: 16", 18"
Seat Depth: 16"
Seat Height: 19.5"
Overall with: 24.81"
Overall length: 38.58"
Overall height: 36.22"

N. W.: 18KGS (40 lbs)
G. W.: 21 KGS (46.2lbs)
Weight capacity: 114 KGS (250 lbs )
Box size: 0.83*0.25*0.92 CBM
Q'TY/CASE: 1 PC/CASE
20'GP, 40'GP, 40'HC Q'TY: 154/308/340 PCS

AI-1 infant incubator (luxury) Function features: -- Microprocessor based servo controlledtemperature system -- Temperature displayed by LED -- Alarms functions: Power failure; Over temperature; temperature deviation; temperature sensor failure; fan failure; -- >37°C temperature setting -- A keypad lock prevent inadvertent changes the setting -- Humidity is adjustable continuously -- Heating power displayed on panel -- A second thermal cut-off function for more safety -- The infant bed inclination angle is adjustable -- Trough for pulling and pushing ,which is convenient to add the water and wash -- Fan with low noise and long life-span -- Temperature deviation and over temperature could be amended in front panel directly -- Silence/reset button for alarms -- six operating windows,two side operating windows can be swiveled -- Heater is electrically cut-out if air temperature inside incubator exceed 40°C -- Cabinet with three drawers.

AI-1 infant incubator (luxury) Function features: -- Microprocessor based servo controlledtemperature system -- Temperature displayed by LED -- Alarms functions: Power failure; Over temperature; temperature deviation; temperature sensor failure; fan failure; -- >37°C temperature setting -- A keypad lock prevent inadvertent changes the setting -- Humidity is adjustable continuously -- Heating power displayed on panel -- A second thermal cut-off function for more safety -- The infant bed inclination angle is adjustable -- Trough for pulling and pushing ,which is convenient to add the water and wash -- Fan with low noise and long life-span -- Temperature deviation and over temperature could be amended in front panel directly -- Silence/reset button for alarms -- six operating windows,two side operating windows can be swiveled -- Heater is electrically cut-out if air temperature inside incubator exceed 40°C -- Cabinet with three drawers.

AW-1 (Medium) infant radiant warmer
 
Brief introduction of infant radiant warmer:
--Microprocessor based servo controlled temperature system.
--The microprocessor-controlled unit allows for three settings: pre-warm, manual or automatic.
--Alarm functions for safety of infant radiant warmer includes:
　　 Power failure;
　　 Temperature deviation;
     Temperature sensor failure;
　　 Over temperature;
--APGAR timer to record therapy time
--Convenient X-ray cassette under infant bed
--Heater head of infant radiant warmer can be adjusted + 90ºhorizontally
--Tilt angle of infant bed is adjustable
--Observe light angle is adjustable
--Transparent protector folded in infant radiant warmer
--Adopts anti-explosion micro crystal quartz infrared radiation tube for its radiation source, the heating is quick and life-span is long
--Alarms are audible and visual in infant radiant warmer
--A second thermal cut-out function for more safety
--Skin temperature sensor failure protect function avoid over temperature in infant radiant warmer
--Temperature deviation can be amended in front panel of infant radiant warmer directly
--LED phototherapy unit
 
Standard configuration of infant radiant warmer:
　Main body (including the radiant source, control system, infant bed, bracket), X-ray cassette , Observe light , I.V.pole, skin temperature sensor, tray, mattress, transparent protector, castors.LED phototherapy unit.
 
Optional parts of infant radiant warmer:
　Drawer;
　RS-232(485) connector;
 
Technical data of infant radiant warmer:
　1.Power supply : 110/220V   60/50Hz
　2. Power input: ≤1200VA
　3. Operating condition:
　　　An ambient Temperature:18°C-30°C
　　　An ambient Relative Humidity: 30%--75%RH
　　　Atmospheric Pressure: 700～1060 hPa
　　　An ambient Air Velocity ＜0.3m/s
　4. Temperature control: 32°C～38°C
　5.Temperature control accuracy: ≤0.5°C
　6.Mattress temperature uniformity : ＜2°C
　7.Skin temperature sensor accuracy: + 0.3°C
　8.Warm-up time: ≤30min
　9. Infant Bed tilt angle:+ 10°
　10.APGAR timer range: ≤24h
　11.Heater head horizontal: ±90°
　12.Mattress size: 67cm×54cm
　13.Distance from heater to mattress: 80cm
　14.LED phototherapy light: 2pcs × 8W
 
Transport and storage:
　Environment Temperature:-40°C~ +55°C
　Environment Relative Humidity: ≤95%
　Atmospheric Pressure: 500～1060hPa
 
Package:
Each unit is packed one case
Size:120cm×80cm×95cm
Gross weight: ≤100kg

 

AW-1 (Medium) infant radiant warmer
 
Brief introduction of infant radiant warmer:
--Microprocessor based servo controlled temperature system.
--The microprocessor-controlled unit allows for three settings: pre-warm, manual or automatic.
--Alarm functions for safety of infant radiant warmer includes:
　　 Power failure;
　　 Temperature deviation;
     Temperature sensor failure;
　　 Over temperature;
--APGAR timer to record therapy time
--Convenient X-ray cassette under infant bed
--Heater head of infant radiant warmer can be adjusted + 90ºhorizontally
--Tilt angle of infant bed is adjustable
--Observe light angle is adjustable
--Transparent protector folded in infant radiant warmer
--Adopts anti-explosion micro crystal quartz infrared radiation tube for its radiation source, the heating is quick and life-span is long
--Alarms are audible and visual in infant radiant warmer
--A second thermal cut-out function for more safety
--Skin temperature sensor failure protect function avoid over temperature in infant radiant warmer
--Temperature deviation can be amended in front panel of infant radiant warmer directly
--LED phototherapy unit
 
Standard configuration of infant radiant warmer:
　Main body (including the radiant source, control system, infant bed, bracket), X-ray cassette , Observe light , I.V.pole, skin temperature sensor, tray, mattress, transparent protector, castors.LED phototherapy unit.
 
Optional parts of infant radiant warmer:
　Drawer;
　RS-232(485) connector;
 
Technical data of infant radiant warmer:
　1.Power supply : 110/220V   60/50Hz
　2. Power input: ≤1200VA
　3. Operating condition:
　　　An ambient Temperature:18°C-30°C
　　　An ambient Relative Humidity: 30%--75%RH
　　　Atmospheric Pressure: 700～1060 hPa
　　　An ambient Air Velocity ＜0.3m/s
　4. Temperature control: 32°C～38°C
　5.Temperature control accuracy: ≤0.5°C
　6.Mattress temperature uniformity : ＜2°C
　7.Skin temperature sensor accuracy: + 0.3°C
　8.Warm-up time: ≤30min
　9. Infant Bed tilt angle:+ 10°
　10.APGAR timer range: ≤24h
　11.Heater head horizontal: ±90°
　12.Mattress size: 67cm×54cm
　13.Distance from heater to mattress: 80cm
　14.LED phototherapy light: 2pcs × 8W
 
Transport and storage:
　Environment Temperature:-40°C~ +55°C
　Environment Relative Humidity: ≤95%
　Atmospheric Pressure: 500～1060hPa
 
Package:
Each unit is packed one case
Size:120cm×80cm×95cm
Gross weight: ≤100kg