Test Items: 18 parameters: RBC, HGB, WBC, LY#, MO#,
GR#, LY%, MO%, GR%, HCT, MCV, MCH,
MCHC, RDW, PLT, MPV, PCT, PDW
Linearity Range: RBC: 1.00~9.99*1012/L
HGB: 20g/L~200g/L
WBC: 0.50~99.0*109/L
PLT: 50~999*109/L
Precision (CV): RBC: ≤2.5%
HGB: ≤1.5%
WBC: ≤3.5%
LY%: ≤6%
MO%: ≤12%
GR%: ≤6%
MCV: ≤2%
PLT: ≤5%
MPV: ≤3%
Dilution Ratio: WBC / HGB 1: 500
RBC / PLT 1: 50000
Sample volume: Periphery/whole blood: 20μl

 Parameters: PH, Nitrite, Ascorbic Acid, Protein, Specific Gravity, Blood, Bilirubin, Urobilinogen, Ketone, Leucocytes, Calcium, Creatinine, Microalbumin
Principle: Dual-wavelength reflectance photometry
Wavelength: 550nm, 620nm, 720nm
Throughput: 420 samples/hour
Memory capacity: 1000 results
Strip: Uritest 10G\11G\13G urine reagent strips

Features:
Easy maintenance design for daily cleaning
High test speed, up to 420 tests per hour, ideal for extensive sample laboratory
Fully automatic operation for ready-to-test
Internal calibration for sensitivity of strips
Cold light source facility with long life and high stability
Barcode reader & touch screen optional
URIT UQ-10 & UQ-11 Urinalysis Control

* Test items: pH, Nitrite, Specific gravity, Ascorbic Acid, Blood, Glucose, Bilirubin, Urobilinogen, Ketone, Leucocytes, Protein.
* Principle: Spherical integrator and dual-wavelength reflectance photometer.
* Two test modes: Normal mode, 60samples/hour,
Continuous mode, 120samples/hour.
*Memory capacity: 1000 samples.
*Strip: Uritest 10A/11A/13G urine reagent strip
* Dimension: 290mm x 200mm x 100mm
Characteristics:
*Low cost, smaller volume, easy to use
*Cold light source, less interference and long life
*Uritest series urine reagent strips for your selection
*Internal thermal printer and external printer applicable.
*Standard RS232 interfacing to host computer.
*Barcode reader applicable

 Uritest series of urine reagent strip for your free selection.
The addition Ascorbic Acid item increase the reliability of the measurement.
Internal graphic thermal printer with character of low noise, high speed and long service life. That is more than 50, 000 samples. Outer printers are also supported.
Larger LCD screen, in-built microcomputer, allow more function menus
RS232 interface, interfacing to the computer is convenient.
Automatically remove the waste reagent strip.
On-line software is available.

 Uritest series of urine reagent strip for your free selection
The addition Ascorbic Acid item increase the reliability of the measurement

Internal graphic thermal printer with character of low noise, high speed and long service life. That is more than 50, 000 samples. Outer printers are also supported.

LCD screen, microcomputer
RS232 interface, interfacing to the computer is convenient

Automatically remove the waste reagent strip
On-line software is available
Maybe the cheapest urine anylyzer who has the self-motion removing reagent strips function.

 ·Uritest series of urine reagent strip for your free selection

·The addition Ascorbic Acid item increase the reliability of the measurement
·Low noise and long life thermal printer

·Touch LCD screen, microcomputer
·RS232 interface and printer interface connect with computer and out printer

·remove the waste reagent strip
·On-line software is available

 Features
Free choice for reagent
Grating as dispersive element
10.4 color LCD in English

Main specifications
Light source: Halogen-tungsten lamp (12 V/30W)
Wavelength range(nm): 330---800nm (continuous adjustment)
Spectrum band: ≤6nm
Absorbency range: -0.3Abs---3.0Abs
Temperature control: Room temperature or 25 or 30 or 37
Sample-volume: 100ul--2000ul
Testing method:
A) Linear end point
B) Non-linear end point (standard curve)
C) Two-points (time fixing)
D) Kinetics
E) Single and double wavelength
F) Absorbency
G) Blank sample
Fixedly store 67 items, up to 200 item parameter
Printer: Built-in thermal printer; Paper width: 110mm
Cuvette: Flowing; 10mm; 32ul
Standard RS-232 interface
Power supply: 220V± 15%, 50Hz ± 2%

Specifications for Biochemistry Analyzer (2280):
Optics:  8 fixed interference filters (340, 380, 405, 492, 510, 546, 578, 630nm)
Light source: Long life halogen lamp, 12V, 20W
Reading cell: A continuous flow-cell: Internal volume 33 ul, usual reading volume 500 ul. Peltier effect temperature control: 37º C± 0.1º .
Reagent capacity: Three reagent disks, each disk can hold 17 different reagents, 51 reagents supported totally.

Sample & reaction plate: Round rotating plate, with 45 positions for sample or standard cups. 37º C thermostat controlled. 4 replaceable multi-cell sectors (24 cells each). 96 reaction cells totally.
Zeroing: Automatic
Calibration: Automatic; 1-45 (optional) or standard protein-based calibration solution
Range of absorbency: 0 - 2.5 Abs
Linearity: <1%
CV: <1%
Power supply: 220V, 50Hz (optional 115V, 60Hz)
Power: 140W
External Interface: Two-way RS-232
Dimensions: 370x650x670mm
Weight: 38Kg
Printer: 24 pin stylus printer, inkjet printer or laser printe

 Light source: Halogen-tungsten lamp (12 V/30W)
Wavelength range (nm): 330---800nm
Spectrum band: ≤6nm
Absorbency range: -0.3Abs-3.0Abs
Sample volume: 100ul-2000ul
Testing method:
A) Linear end point
B) Non-linear end point (standard curve)
C) Two-points (time-fixed method)
D) Kinetics
E) Double wavelength
F) Absorbency
G) Sample blank
Item storage: More than 200 item parameters
Printer: Built-in thermal printer (cab be connected to outer printer)
Sample dosage: 1-50ul (according to demand of the reagent)
Cuvette: Flowing, 32ul, 10mm
Interface: RS-232
Power supply: 220V± 10%, 50Hz

 Light source: Halogen-tungsten lamp (12 V/30W)
Wavelength range (nm): 330---800nm (continuous adjustment)
Spectrum band: ≤6nm
Absorbency range: -0.3Abs-3.0Abs
Temperature control: Room temperature or 25º C 30º C or 37º C
Sample volume: 100ul-2000ul
Testing method:
A) Linear end point
B) Non-linear end point (standard curve)
C) Two-points (time fixing)
D) Kinetics
E) Single and double wavelength
F) Absorbency
G) Blank sample
Fixedly Store 67 items, up to 200 item parameters
Display: 240 x 128 LCD
Printer: Built-in thermal printer; Paper width: 110mm
Cuvette: Flowing, 32ul, 10mm
Standard RS-232 interface
Power supply: 220V± 15%, 50Hz ± 2%