AI-2 infant incubator (luxury)
 
Function features of infant incubator:
-- Microprocessor based servo controlled temperature system
-- Alarms functions of infant incubator:
　　 Power failure;
　　 over temperature;
　　 temperature deviation;
　　 temperature sensor failure;
　　 fan failure;
-- Humidity in infant incubator is adjustable continuously
-- A keypad lock prevent inadvertent changes the setting
-- Integral timer to record therapy time
-- Skin temperature sensor failure protect function avoid over temperature
-- Air temperature, skin temperature, timer and heat power separately displayed by LED
-- >37°C temperature setting
-- Silence/reset button for alarms
-- Trough for pulling and pushing ,which is convenient to add water and wash in infant incubator
-- Fan with low noise and long life-span
-- Temperature deviation and over temperature could be amended in infant incubator front panel directly
-- A second thermal cut-off function for more safety
-- The infant bed inclination angle is adjustable
-- six operating windows,two sides operating windows can be swiveled
-- Heater is electrically cut-out if air temperature inside infant incubator exceed 40°C
-- Cabinet with three drawers, silence castors
 
Standard configuration of infant incubator:
   Main body(including the transparent hood,control system,infant bed,water trough),skin temperature sensor,I.V.pole, mattress, cabinet, castors.
 
Optional parts of infant incubator:
　Phototherapy up side unit;
　phototherapy from up and down sides;
　RS232(485)connector; Tray/pole;
　Infant bed pulled from side door;
　Infant bed pulled from side and front door;
　Double wall hood.
 
 Technical data of infant incubator:
　-- Power supply : AC 110/220V 60/50Hz
　-- Power input : ≤420VA
 
Operating conditions of infant incubator:
　-- Environment temperature: 20°C~30°C
　-- Environment relative humidity: 30%~75%RH
　-- Environment air velocity of flow: <0.3m/s
　-- Air Temperature control range： 25°C~38°C
　-- Skin temperature control range:32°C~38.5°C
　-- Skin temperature sensor accuracy: +0.3°C
　-- Temperature fluctuation: +0.5°C
　-- Uniformity of mattress temperature: ≤0.8°C
　-- Warm-up time: ≤45min
　-- Internal noise level: ≤55dB
　-- Infant incubator bed tilt angle : +10º
　-- Mattress size: 65cm(L)×37cm(W)
　-- Trough capacity: 1200ml
　-- Air filter:0.5um
 
Package:
Each unit is packed in two wooden crate
　--Size (control unit and cabinet):120×70×96cm
　　 G.W.:110Kg
　-- Hood: 97×56×63cm
　　 G.W.:40Kg
 
Transport and storage:
Environment Temp:-10°C--+70°C
Environment Relative Humidity: ≤80%
Atmospheric Pressure: 500--1060Hpa