The AX-4-10A Intelligent Burnout Furnace is used in dentistry, it is updated from manual burnout furnaces. Most traditional burnout furnaces have a one-level temperature control, which are not accurate, and the speed and rate of the temperature increase and the temperature preservation time cannot be controlled. However, this intelligent burnout furnace has a multi-level temperature control, thus it does not need to be operated manually. The temperature increases and preserves automatically, and the temperature and time control are very accurate.The time relay function enables the machine to started after 1-96 hours (4 days).

Voltage:220V/50Hz±10%
Power: 4000W
Maximum temperature:1200
Chamber size:30×20×12cm
Dimensions:75×46×71cm
Package size:83×54×88cm
Weight:120kg

AX-AWM1 Dental Argon-arc Welding System is a necessary tool used in dental laboratory. This equipment has the same function and lower cost compared with the laser welding machine. Five commonly-used model to weld different materials such as Co-Cr alloy, gold-Co-Cr alloy, ferroferrite and other metal materials used in orthodontics are available.

Besides its small size, safe, stable and noiseless features, this machine is also easy to operate and neednt maintenance. It doesnt take too much room, on the contrary, a standard worktable is enough. Thanks to the free adjustment of power and pulse time the welding point can be accurately positioned. The machine is equipped with pancratic lens and double-eye microscope. The LCD electronic shutter can effectively protect the users eyes. If no operation for 5 fives, the power and the pulse time will be automatically adjusted into Ortho model in order to avoid damaging the welding material.

Voltage:220V/50Hz±10%
Max. input current:4.5A
Degree of protection:IP21
Gas supply pressure:≥0.1Mpa
Welding voltage:40V
Welding current:5A∼600A
Welding time:3ms∼30ms
Max. welding frequency:1Hz
Max. argon consumption:5L/min

The operator tool be use for dental technician in dental laboratory or dental clinic.

package size:27*23*54cm

weight:120kg

The Dental Press and Polymerization Unit is a combination of dental press and polymerization unit. It skips the complicated working steps and makes working experience much more easier. With this machine, clamps for polymerization unit and dental press will no long be needed. This durable machine will not have problem if used with proper care, therefore the cost of manufacturing is lowered.

Voltage: 220V/50Hz±10%
Rated Power: 600W
Rated pressure:2000kg--3500kg
Motor power:6W
Dimensions:28×14×40cm
Weight: 10kg

The Automatic Polymerization Forming Unit is an newly developed equipment that has entered dental laboratories and changing the working environment, making it much more easier for dental technicians to do their jobs. This machine is a user-friendly machine. No boiling and pressing is needed, it featured: automatic pressure, automatic heating, high efficiency and environmental friendly, which makes it superier comparing to the traditional boiling method.
It is a high-tech equipment with easy operations. Simply put flasks which are ready on its platform, screw it down with the handle, after that remove the flask and remove unecessary materials on the flask. Then put the flask on the platform again and turn on the power, turn to the automatic mode, adjust positions (upper and lower position, two flasks for each position), set the timer to 20-25 minutes. After about 40 minutes the pressure, heating, keep warm and pressure release processes will be done, and the dentures will be ready. Low price, high efficiency, low power consumption are its main features.

Advantages:

This machine is safe to use, no need to be guarded by users. Users can just leave it working unguarded after adjusting the programs.

• Low power consumption. Its power rating is 600W; 900W which enables the machines to consume less water, electric and gas energy.
• Easy operations for dental laboratory technicians. The heating time of 20-25 minutes are need for making both big and small dentures.
• This machine can be looked as two separate machine: the dental press, which is used to press the dentures and remove the unnecessary materials; and polymeriation unit, which is used to polymerize the denture under appropriate temperatures to make it turn solid to make the dentures more durable.

Power supply voltage: 220V/50Hz±10%
Rated Power: 900W
Rated pressure:2000kg--3500kg
Motor power:6W
Dimensions:75×31×19cm
Weight: 15kg

The AX-MTB Model Milling Machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor, a durable alloy grinding head, a power switch and an indicator light.

Voltage:220V/50Hz±10%
Power:140W
Grinding head:C 625 M06
Dimensions:26×21×25cm
Package size: 32×29×33cm
Weight8.5kg

The Ultrasonic Cleaner can be used to clean all kinds of metal and plastic equipments,glassware and ceramics.The strong ultrasonic power makes it possible to clean the tiny places and gaps which sponges and brushes cannot reach.This ultrasonic cleaner is digital,and it has a large chamber,it is also equipped with cleaning nets inside.

Power supply voltage:220V/50Hz±10%

Power:50W

Ultrasonic frequency:60kHz

Chamber capacity:5.5*18*8.6cmcm

This product can magnify 12 times which enables them to see the defects in their work-pieces easily. This magnifier lamp can help dental technicians to do their melting, polishing and burnishing jobs which require precision.

Voltage:220V/50Hz±10%
Power:12W
Magnification:12 times
Package size:39×17×13cm
Weight:1.6kg

The AX-2006 Duplicating Machine is used for melting and mixing agar in restorative dentistry, it is a necessary equipment for duplicating molds. This machine is upgraded from the AX-2002 Agar Mixer, the digital controlling system makes it more convenient.

Voltage:220V/50Hz±10%
Motor rotational speed:40rpm
Heating power:500W
Amount of agar:3Kg-5Kg
Dimensions:37×29×52cm
Package size:45×35×60cm
Weight:21kg