Functions and features:
(1) Operation modes: Flow rate controlled infusion mode. Volume and Time controlled infusion mode, Total intravenous anesthesia infusion (TIVAI)mode.
A) flow rate controlled infusion mode: Control by flow rate: Seven flow rate units: Ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
B) Volume and Time Controlled Infusion: Control by the desired volume and time. C) Total intravenous anesthesia infusion (TIVAI) mode: Controlled by the first dose, the time need for the initial infusing dose and the maintain infusion rate.
(3) KVO function: Automatically start KVO when infusion stopped.
(4) Alarm and Warns: When AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged etc. It will send alarms.
(5) Available syringe: All kinds of 10ml, 20ml, 50(60)ml syringes.
(6) Modular design, designed for both stationary and mobile use freely. The pumps can be assembled to a unit to save room or mounted independently.

SPECIFICATIONS:
Range of Flow rate: 10ml syringe: 0.1~300ml/h; 20ml syringe: 0.1~600ml/h; 50(60)ml syringe: 0.1~1200ml/h;
Suitable Syringe: All the standard 10ml, 20ml, 50(60)ml syringes. Accuracy: +/-3% Bolus rate: 300ml/h
 

Introduction:
XB-800 Syringe Pump syringe pump is routine use equipment for hospital emergent treatment, cure and nursing. It adopts the new technology of microcomputer with compact structure. It has multi-intelligent alarm functions, could use disposable syringe of many kinds of, strong functions and use convenient. It is especially suitable for exact micro infusion or quick infusion for long time. This product is use for push the syringe to control the liquid amount into patient body for medical institution.
1. Work Condition
1.1 Ambient temperature: +5c---- 40c
1.2 Relative humidity: 20%~90%
1.3 Power supply: AC220V 22V, 50Hz
1.4 Built-in batteries: 12V, 1.2h/A (Undervoltage value ≤ 10.5V)
It can be used for 2 hours continuously after 24 hours full charged.
1.5 Atmospheric Pressure: 860hpa~1060hpa
1.6 Storage Temperature: -40c~+55c
2. Basic Parameters
2.1 Dimensions (mm): 320 (L)/145(W)/120(H)
2.2 Weight: Approximately 3 kg
2.3 Power Consumption: ≤19.8VA
2.4 Compatible Syringe Size: 10ml, 20ml, 30ml, 50ml Disposable
2.5 Infusion Flow Selection: 0.1~199.9ml/h, original value is 0.1ml/h
2.6 Infusion Range: 0.1~999.9ml, original value is 0.1ml
2.7 Occlusion Pressure: 40K~70K pa
2.8 Flow Rate Precision: 5%(0.1ml/h≤Flow Rate≤50ml/h)
/3%(50ml/h≤Flow Rate≤199.9ml/h)
2.9 Alarm: Self-Test, Occlusion, Nearly Finish, Finish, Low battery,
Standby, Move
2.10 Functions: Syringe's Type Test, Transfusion amount display, Flow rate display, Power display, Auto-Alarm, KVO function

After power off, the electrical memory function keeps for five years
(Only effective for setting content)

 

Vet infusion pumps, vet syringe pumps, vet anaesthesia pump, syringes, infusion sets and so on vet use medical equipments; Human use infusion pump, human use syringe pump and so on medical equipments in China, our head office is located in Hunan province, China, and has branches in Shenzhen and Changsha, have our own R&D dept. And sales teams, we welcome OEM, ODM and custom-tailor according to your actual requirements.

XB-900 Vet Infusion Pump

CHARACTERISTICS:
1>2 control ways: Can be used in either drop counting control way or volumetric control way ml/h or drops/min
2>High speed: 1ml/h~1000ml/h or 1 drop/min ~250 drop/min.
3>3 levels of occlusion value: High, middle and low.
4>Hard based free-flow protection: Avoid any free flow or leakage, prevent any danger to patients.
5>Drops detector: Can detect the drops infused, automatically detect the IV line type and ensure the accuracy for any IV line.
6>Applicable IV Sets: Any standard IV sets.
7>Rechargeable internal battery.
8>Visible and audible alarm: When any malfunction, error, air-on-line, occlusion, error flow rate and so on.
9>KVO function: After infusion is complete, the pump automatically switches to the smallest flow to prevent creating the thrombus.
10>Bolus function: When during infusion, press a key to infuse at the rate of 400ml/h.

 

Product introduction
XB-1302 stackable syringe pump is designed for delivery of anesthetics drugs by target-controlled infusion according to pharmacokinetics and pharmacodynamics and the experience in clinical use. It makes use of the integration of the technology of micro-processor control and precise manufacture. It is available for performing an intravenous analgesia infusion.
Functions and Features:
(1) Operation modes: Plasma target controlled infusion mode, Effect site target controlled infusion mode, Flow rate controlled infusion mode.
A) Plasma target controlled Infusion mode enables users to set the target plasma concentration, Effect site target Controlled Infusion mode enables users to set the target effect site concentration. The pump delivers drugs to maintain the desired concentration according to the pharmacokinetic model. The Infusion rates are altered automatically
B) Flow rate controlled infusion mode: It enables the users to control the infusion by setting the flow rate. There are seven flow rate units of available such as ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
(2) Closed-loop Target-Controlled Infusion: Connected to a specified anesthetic depth monitor (Aspect A2000/3000 BIS monitor) with RS232, the pump can adjust the target plasma or effect site concentration automatically according to the feedback from the monitor.
(3) Bolus function: Help patients to past the stimulative phase safely and steadily.
(4)KVO function: Automatically start the KVO(keep the vein open) infusion when the normal infusion stopped.
(5)Alarm and Warns: When something abnormal occurs, the pump can give out alarming and warning information such as AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged etc.
(6)Available syringe: All kinds of syringe whose standard capacity is in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting. And the infusion accuracy can be guaranteed.
(7)Modular design, designed for both stationary and mobile use freely. The pumps can be assembled to a unit to save room or it mounted independently.

SPECIFICATIONS:
Range of Flow rate:
10ml syringe: 0.1~300ml/h;
20ml syringe: 0.1~600ml/h;
50(60)ml syringe: 0.1~1200ml/h;
Suitable Syringe: All the syringe in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting.
Accuracy: +/-3% (on condition that the total infusion capacity is more than 5.0ml and the infusion rate is more than 2.0ml/h and the syringe extension set have been purged)
Bolus rate: 300ml/h
Display: A large screen (192*64 pixel), rotary setting with convenient operation interface.

Operating conditions:
Ambient temperature: +5~+40 C;
Relative humidity (RH): 30 %~75 %
Power supply:
AC: 100V~245V\50 +/-1Hz
Battery: 14.4V battery can use for more than 3 hours after charged for 10 hours.
Atmospheric pressure: 860~1060hPa
Dimension (mm): 214(L)*134(W)*94(H)
Weight: 2.2kg
Safety Classification: Class II and Type CF
 

Infusion pump & syringe pump top manufacturer, welcome to contact Ms Anne for further.
1> Flow rate: 1ml/h~1000ml/h or 1 drops/min ~250 drops/min.
2> 2 work modes: Liquid volume mode and drops mode, ml/h or drops/min.
3> 3 levels of occlusion value: Adjustable from high, meddle and low.
4> Free-flow protection: Prevent any free flow or leakage.
5> Reasonable and unique structure and design prevent bringing any air bubble and air bubble alarm error.
6> Drop detector: Automatically demarcate the accuracy of any IV set, accordingly improve the infusion accuracy.
7> Can use any standard of IV set, automatically remember this IV line type.
8> Rechargable battery.
9> Visible and audible alarms for any malfunction, air-on-line, operation error, unnormal flow rate and so on.
 

Vet infusion pumps, vet syringe pumps, vet anaesthesia pump, syringes, infusion sets and so on vet use medical equipments; Human use infusion pump, human use syringe pump and so on medical equipments in China, our head office is located in Hunan province, China, and has branches in Shenzhen and Changsha, have our own R&D dept. And sales teams, we welcome OEM, ODM and custom-tailor according to your actual requirements.

XB-900 Vet Infusion Pump
CHARACTERISTICS:
1>2 control ways: Can be used in either drop counting control way or volumetric control way ml/h or drops/min
2>High speed: 1ml/h~1000ml/h or 1 drop/min ~250 drop/min.
3>3 levels of occlusion value: High, middle and low.
4>Hard based free-flow protection: Avoid any free flow or leakage, prevent any danger to patients.
5>Drops detector: Can detect the drops infused, automatically detect the IV line type and ensure the accuracy for any IV line.
6>Applicable IV Sets: Any standard IV sets.
7>Rechargeable internal battery.
8>Visible and audible alarm: When any malfunction, error, air-on-line, occlusion, error flow rate and so on.
9>KVO function: After infusion is complete, the pump automatically switches to the smallest flow to prevent creating the thrombus.
10>Bolus function: When during infusion, press a key to infuse at the rate of 400ml/h.

 v XB-1000 infusion pump is a combination of microelectronic technology and modern nursing, an important outcome of microcomputer applied to clinical nursing. It can control the speed and general quantity of infusion precisely and continuously over long hours on a large scale, which can completely meeting the various requirements of modern clinic treatment on different occasions and is now widely used in hospitals, clinics and nursing.
v Double CPU can monitor one and another, this pump can long-time, precisely, large scope and continuously control the infusion volume and speed, can meet the different requirements of all clinics or wards.
v No need special infusion sets, can applicable for all brands of infusion sets according to the standard of GB8368-2005, and it will automatically calibrate the accuracy via the drop detector for the current infusion set.
v XB-1000 infusion pump is widely used in clinics, wards and nursing where patients need intravenous infusion at steady speed or continuous & precise infusion, such as ICU, CUU, pediatrics, gynecology and obstetrics, internal medicine, surgery, operating room, first aid room and so on dept.
v It is also the conventional equipment for first aid, treatment and
v nursing in hospitals.
Clinical Application Scope:
v It's used in hospitals where patients need intravenous injection at steady speed or continuous and precise injection for liquid or drugs, widely used in ICU, CCU, first-aid, department of Pediatrics, Gynecology, Nursing, Surgery and so on, most of all department in hospital, clinical and nursing station.
 

1>2 control ways: drop counting control way or volumetric control way ml/h or drops/min
2>High speed: 1ml/h~1000ml/h or 1 drop/min ~250 drop/min.
3>3 levels of occlusion value: High, middle and low.
4>Hard based free-flow protection:
5>Applicable IV Sets: Any standard IV sets.
6>Rechargeable internal battery.
7>Visible and audible alarm: 8>KVO function: After infusion is complete, the pump automatically switches to the smallest flow to prevent creating the thrombus.
9>Bolus function: When during infusion, press a key to infuse at the rate of 400ml/h.