LED Curing Light (II)
Place of Origin     China>>Shandong
Brand Name     UNICOM-OPTICS or Neutral English

Name:LED Curing Light Class: Curing Light Models:DS-1704
Product Description
Light source: 5W LED
Blue light intensity: 800---1000 mW/cm2
Operation mode: SET: 10/15/20 s 3S: 3 s strong light
Turbo light guide: enhanced greatly curing effect
Specially one button of 3 s intense light for dental cosmetology of erose tooth
Have a sound reminded
Rechargeable battery: each charge use more than 100 times

Quen Lin uses extremely high luminosity LED to work within almost photosensitive polymerized composites.
The light wavelength is between 440~480mm.
QL-7 LED Curing light made by Quen Lin possess high quality, light weight and elegant appearance.
Please read the instruction manual at length before using this specialized product.

1. Plug the transformer into the outlet, and connect the transformer power output connector with the LED power input connector.
2.Take off the rubber cover from the fiber probe. Put the filter on the fiber probe (concavity faces the fiber probe)
3.Press the switch to turn on/off the LED curing Light; Press the mode adjusting button to change the mode (F1: General mode, F2:Ramp mode, F3: pulse mode, just press the button and the mode will change from F1 F2 F3 F1……loose the button as the mode change to what you want); press the timer adjusting button to set the timer (5~25 sec, press the button and loose it as the timer change to what you want)

SDFB-Av Dental LED Curing Light:

Characteristics:



1. Light source: 5W LED.

2. Blue light intensity: 700---1000 mW/cm2.

3. Wave length: 420---480 nm.

4. Turbo light guide: Enhanced greatly curing effect.

5. Power supply: AC. / DC. 12 V / 10 W.



Main Technical Parameters:

1. Power consumption ≤ 10 W.

2. Spectrum character: Wavelength range: 420 --- 480 nm.

3. Operation time: 10s: gradually light 2 s + intense light 8s.

4. Turbo light guide: Ф9.8 ---> 7.5 mm, disinfectable.

5. Depth of solidifying resin for 10s: no less than 5 mm.

6. Power supply: AC./DC.12 V / Frequency: 50/60 Hz.

7. Size : ∮2.1 cm x23 cm.

8. Weight : 150g.


AC Adapter: (optional accessories)
　
Input: ac. 100--240 v / 50-60 Hz.

Output: 12v / 1.5A.

SDFB-A6&A8 Dental LED Curing Light:

Characteristics:



1. Light source: 5W LED

2. Blue light intensity: 800---1000 mW/cm2

3. Operation mode: SET: 10/15/20s/3s strong light

4. Turbo light guide: Enhanced greatly curing effect

5. Specially one button of 3s intense light for dental cosmetology of erose tooth

6. Power supply: FB-A6: Ac 100-240V; FB-A8: Ac 12 V(connect to dental unit)



Main Technical Parameters:

　1. Power consumption ≤8.5 W

　2. Spectrum character:420- 480nm

　3. Operation time: 　
1) 10s: gradually light 2s + intense light 8s; 　　
2)　15s: gradually light 3s + intense light 12s; 　
3) 20 s : gradually light 4s + intense light 16s;
4) 3s : intense light 3 s (for dental cosmetology of erose tooth)
　
4. Turbo light guide : Ф9.8 --->Ф7.5 mm
　
5. Depth of solidifying resin for 10s: no less than 6 mm
　
6. Automatically shut down time: 30s

7. Power supply :
FB-A6 : Ac 100-240V frequency: 50/60 Hz
FB-A8 : Dc or Ac 12 V / 1.5 A frequency: 50/60 Hz
　
8. Size of host unit : ∮2.3 cm x23.5 cm
　
9. Weight of host unit : 170g

Feature:

1. Convenient for operation

2. Small size, cordless and light weighted.

3. Powerful Output

4. Light intensity can reach 1500mW/cm2

5. 3 varieties of modes

   With push of the button, it also includes a timer setting of 5 or 20 seconds
 
   and 3 varieties of modes : strong light, gradually light and Pulse.

6. Can be used worldwide

Specification:

1. The recharge input voltage is 110V-240V, which is suitable for all country.

2. Weight: 220g

3. Light intensity: min 900mW/cm2, max 1500mW/cm2

4. Battery: rechargeable Li-on battery(after charging it can  be used for 80-100 times)

5. Wave length: 420nm - 480nm

6. Power voltage: AC 110 - 230 V / 50 - 60 Hz

What's includes

1. 1x Power unit

2. 1x Optical fiber

3. 1x Charger

4. 1x light proof screen

5. 1x Introduction bool