Detail specification for 125 mA Medical x - ray machine :

Fluoroscopy,Digestive track spot film radiography,General radiography,
Filter-ray device radiography
Unit Configuration
Control,HT generator unit,Ht cable,X-ray tube unit,Diagnostic table,Column
MAIN CHARACTERIDTICS
1Single table and single tube
2Design according to the electric mechanism of middle-size machine , The function is reasonable
3The high-tension system is of split structure. Equipped with afullwave rectification high-voltage generator and independent X-ray tube unit, with large output power and reliable and stable operation
4Supply voltage (V), roentgenoscopy , radiography (kv) and stepless adjust able
5Equipped with the manostat for filament of X-ray tube and the spacecharge compensator as to ensure the stable and accurate output
6Equipped with the capacity limitation and portection circuit and Kv mA S interlock limitation and protection
7Adopt the digial circuit timer, grade according to R10 priority coefficient and can control time exactly,
8Diagmafic table is of electric back rotation and is equipped with vibrating filter-ray device
9The spot film device of luminescent serene can hold the film jecket of various sizes and can make the photography of full-film and two sectional films separateiy
10The column post hast has the bottom track only, which is easy while installation

Optics System

Outer Diameter of Tip:5mm-8mm

Outer Diameter of tube:5mm-8mm

Working Length:500mm-2000mm

Total Length:634mm-2034mm

Weight:370g-500g

Packing:326mm×237mm×70mm

Side View Tip:6mm(Optional)

Battery:3aaa

Side View Details

Field Of View:90°

Direction Of View:30°/45°/60°

Focal Range:30mm-150mm

Insertion Tube & Light Source SPECs
1. Image Sensor: CMOS Image Sensor
2. Resolution (Dynamic / Static): 320(H)*240(V)
3. Size Tip (Insertion Tube) Diameter: 5.5mm
4. Insertion Tube Length: 1-30M
5. Frame Rate: -30 fps
6. S/N Ratio: 42dB
7. Exposure: Automatic
8. White Balance: Fix
9. Field of View (FOV): 57/91°
10. Depth of Field (DOF): 2 cm to infinity
11. Light Source: 4 White LEDs

System SPECS
1. Power: DC5V
2. Display: 3.5"TFT LCD Monitor 320*240 Pixels
3. Interface: Mini USB 1.1/ AV out/ AV in/
4. Battery: Rechargeable Li-Polymer Battery (3.7V)
5. Video Out Format: NTSC
6. Recording Medium: SD card (capacity can be up to 32G)
7. Compression Format: MPEG4
8. Still Image Storage Format: JPEG (640*480)
9. Video Recording Format: AVI (320*240)
10. Language: English /Optional 7 language

Insertion Tube & Light Source SPECs
1. Image Sensor: CMOS Image Sensor
2. Resolution (Dynamic / Static): 320(H)*240(V) / 640(H)*480(V)
3. Size Tip (Insertion Tube) Diameter: 5.5mm
4. Insertion Tube Length: 1-3 meter
5. Frame Rate: -30 fps
6. S/N Ratio: 42dB
7. Exposure: Automatic
8. White Balance: Fix
9. Field of View (FOV): 57°
10. Depth of Field (DOF): 2 cm to Infinite
11. Light Source: 4White LEDs

System SPECS
1. Power: DC5V
2. Display: 3.5"TFT LCD Monitor 320*240 Pixels
3. Interface: Mini USB 1.1/ AV out/ AV in/
4. Battery: Rechargeable Li-Polymer Battery (3.7V)
5. Video Out Format: NTSC & PAL
6. Recording Medium: SD card (capacity can be up to 2G)
7. Compression Format: MPEG4
8. Still Image Storage Format: JPEG (640*480)
9. Video Recording Format:avi (320*240)
10. Language: English(Default)+7 other languages

System SPEC
Camera outer diameter: 10mm
Cable length: 80cm
Cable outer Diameter: 9mm
Image Sensor: 1/6 VGA Color CMOS sensor
Monitor size: 2.5inch LCD
Video format: PAL/NTSC
Resolution: 640(H)*480(V)
S/N Ratio: 52db
Depth of field (DOF):5cm to Infinite
Field of View (FOV): 57degree
Light source: 4LEDs
Power: 4  AA dry batteries
Working temperature: (-2 to +55)

 

One person transport/operation, Inspect pipelines, manholes, vessels, tanks, sewer treatment plants, or other entries that are difficult to reach or the restricted area). Can be widely used in industry and the public security or police areas.

One person transport/operation, Inspect pipelines, manholes, vessels, tanks, sewer treatment plants, or other entries that are difficult to reach or the restricted area). Can be widely used in industry, the public security or police and Anti-terrorism areas.

*It can regulate the length of the telescopic stick, put the high-magnification, high-definition video camera into the pipe or other space, the internal situation will be clear at a glance

*HID(High Intensity Discharge) LED light provide maximum lighting capabilities under all pipe conditions and a full range of 27 optical zoom camera to check up to 50 meters in depth. Suitable for inspection of 100 mm diameter ~ 2 meters of the pipeline, can clearly observe the crack pipe, plug the internal situation.

* Portable Video Inspection Camera with a package of video inspection system controller, integrated operational control, video storage, output, PC directly record label, LCD display and other functions

* All the components installed in a safety box, (Weight: 25kg Mesurement: 1200*440*170mm)carrying and ease to installation.

** Large capacity lithium battery, can continuous work 2 hours after recharger(with charger). Equipped with spare battery can work 6 hours.

* 6 meter telescopic aluminum alloy light stick(5PCS\0.6kg/PC. Length: 1m/PC) and fast connection to extend the leveraged design to detect a wider range(Optional 3 PCS, Max. 9m)

* Controller design shoulder bag, battery, display and control of all into account, the operation is very convenient to carry

Technical Data.
1.27X optical zoom, Auto-focus
2. Resolution: 480 horizontal lines
3. Min Sensitivity: 0.1 LUX
4. High Brightness LED lamp, up to 10, 000 hours life
5. Standard 9-meter lightweight aluminum alloy pole (optional 10 meters length is available)
6. Video image and storage, digital output directly, PC record directly
7. Battery or AC power source

Options: Wireless video transmission module, video glasses, Mini-Computer
 

Product Information:

Small Body

350XT ground occupied area is only 0.36 ㎡, which is probably suitable for any small dark room. You don't need to worry about space issue.

High Auto Control

350XT is an auto film processing device controlled by a micro computer. To easily set processing data, adjusting of temperature and speed is set by two groups of potentiometer on control board. Functions like chemical replenish, ready for film processing, solution low-level indicator and every type of alarm, can be automatically realized through LED indicators of control panel. It is easy to understand and operate. Indicators on control panel would let you know all working status at any time. When chemical temperature reaches set value, what you do is only to put a film in and machine will automatically enter working status and make the processing.

Save Chemicals

Develop and fix volume of 350XT is only 5 liters which may largely reduce new chemicals replacement cycle and keep chemical effectiveness at a good status. To reduce air oxidation to chemicals, a special designed anti-oxidation cover is placed in chemical tank. It largely reduces air oxidation to chemical solution and meanwhile it reduces oxidized chemical’s pollution to air in working room.

Hi-efficient Dryer

There is a hot-air duct-mode dryer system of hi-efficiency and squeeze roller of hi-performance in 350XT dryer section. This guarantees the high performance of dyer required by mass processing of film in a high-temperature environment.

High Working Reliability

This machine has state of the art and matured design in film-transport rack’s structure, roller transport, electronic control, hot-air dryer, chemical replenish and circulation. It has a long life period for usage. Film jam, scratches and film not dried will not occur.

Film Output Selectable

Two modes are designed for 350XT’s film output way, they are:
(1) Front film output mode: in this mode the entire machine is placed in dark room for processing operation. Film will be out on the top of machine after processing.
(2) Rear film output mode: what you do is only to adjust a group of guide in dryer exit to the status of rear-film-output, and make an 8×48cm hole in the dark room and separation wall, mount the film collector below the hole. Film output is collected in light room.

Fast Processing Speed

350XT is designed according to hi-speed requirement on film processing. Fastest whole processing time of machine can be at 90 sec, suitable for any urgent diagnosis or hospital that may require fast processing.

Cost Effective

350XT market sale price is lower. It applies for organization that processes 30～150 pieces everyday. Chemical, power and water consumption of this machine is low. Usage cost of whole machine is 25%～40% lower than similar processor, so it applies for the one with less film processing volume, one hospital with several machines, and the hospital or department that one working room is configured with several machines.

Easy Maintenance

Easy maintenance is well considered during 350XT’s design. Besides features of small machine body, light weight, easy to move, the machine’s racks from develop to dryer can be all easily released out and washed by water for maintenance. Electrical control part is enclosed and mounted below entrance feeding box. By opening external cover of this E-box, you may do the maintenance easily on every electronic component inside.

Energy Saving

Max power consumption of 350XT whole machine is only 2.2 KW, water consumption per minute is only 2 liters which will be automatically opened when processing film. If no film processing, water flow and dryer heating system, etc, will automatically enter standby and energy saving mode.

Product Information:

Fast Speed yet Smart Body

When 450XM fastest develop time is at 20 sec (whole processing time 90 sec), it is able to process 180 pieces of 14×17inch film, and 240 pieces of 10×12inch film (theoretical volume). It fully meets the requirement of any hospital on processing speed.

Complete Auto Control Processing Program

450XM is an advanced complete automatic processing device, controlled by a micro computer. It is able to auto control on chemical’s temperature, replenish, circulation and dryer and you can modify processing program data. Multiple detection systems inside the machine automatically control solution level-low, over-temperature, wash water’s level, status of processing film or no film, with also alarm and display functions provided.

High Processing Quality

For the design of chemical circulation mode and circulation volume, we fully consider the high effectiveness of chemical circulation, with special anti-oxidation cover of chemical configured. And we also integrate precise replenish system of auto detecting processing area and hi-precision roller transport system for film. Thus working performance and processing quality of whole machine get an advanced and excellent level.

Film Output Selectable

Two modes are designed for 450XM’s film output way, they are:
(1) Front film output mode: in this mode the entire machine is placed in dark room for processing operation. Film will be out on the top of machine after processing.
(2) Rear film output mode: what you do is only to adjust a group of guide in dryer exit to the status of rear-film-output, and make an 8×48cm hole in the dark room and separation wall, mount the film collector below the hole. Film output is collected in light room.

Easy Maintenance

Easy maintenance is considered during 450XM’s design. Besides features of small machine body, light weight, easy to move, the machine’s racks from develop to dryer can be all easily released out and washed by water for maintenance. Electrical control part is enclosed and mounted below entrance feeding box. By opening external cover of this E-box, you may do the maintenance easily on every electronic component inside.

Hi-efficient Dryer

450XM’s high processing speed is thanks to hot-air duct-mode dryer system of hi-efficiency and squeeze roller of hi-performance in dryer’s inlet. This guarantees the high performance of dyer required by mass processing of film in a high-temperature environment.

Advanced and Reliable Roller Transport System

450XM rack design applies advanced roller film-transport technology and Huqiu brand-new hi-precision roller manufacture technique. This assures the reliability and hi-quality requirement during film processing.

High Working Reliability

Design and manufacture of 450XM absorbed similar product’s merits and combined with over 20 years of Huqiu’s professional experience in manufacture processing device. It is a new generation and advanced medical film processing. This machine has state of the art and matured design in film-transport rack’s structure, roller rotation, single microcomputer, hot-air dryer, complete auto chemical replenish and circulation. It has a long life period for usage. Film jam, scratches and film not dried will not occur.