1. Disposable Syringes.
2ml ( 21 G x 1" / 22 G x 1 " / 23 G x 1" / 24 G x 1" )
3ml ( 21 G x 1" / 22 G x 1 " / 23 G x 1" / 24 G x 1" ).
5ml ( 21 G x 1" / 22 G x 1 " / 23 G x 1" / 24 G x 1" ).
10ml( 22 G x 1&1/2 " / 21 G x 1&1/2" )
20ml( 20 G x 1&1/2 " / 21 G x 1&1/2" )
50ml With out needle .Ribbon packing .
2.Hypodermic Needles.
size: 16G, 18 G , 19 G, 20 G , 21 G, 22 G , 23 G , 24 G , 25 G , 26 G. 27G

Surgical Instrument--Infusion Pump (SK-600IB)
Technical Parameters:
Model: SK-600IB
Bolus: 600ml/h
Flow Rate Range: 1-2000ml/h
Volume Limit: 1-9999ml
Accuracy: + / - 5%
KVO Flow Rate: 1ml/h, keep vein open (KVO) rate
Power Supply: AC100-240V, 50/60Hz, 25VA
Max Power Consumption:
25W, can run for more than 5 hours continuously after fully recharged.

Battery Recharge:

When the pump is connected to the AC power, the battery will autimatically recharge (about 8-14 hours to recharge fully. )

Displayed Information:

Flow rate, voloum limit, accumulated voloum, power indicator light, bed No., air, occlusion, empty.

Alarm Information:

Infusion completion, occlusion, air bubble, low battery, control abnormal, No AC power supply, installation error.

Max Size of Outer Shell: 120*140*190mm (length*width*height)

Max Weight: Less than 2.5kg

Classification: Type BF

Outer Shell Material: ABS Plastic

Operation Condition:

Environment temperature +5 - +40, atmosphere pressure 86-106KPa, related humidity 20%-90%.

Storage and Transport Condition:

Environment temperature -15 - +50, atmosphere pressure 86-106kpa, related humidity 20%-90%.

Applicable Infusion Pipe: All standard infusion pipe.
 

Infusion Pump (SK-600I)
Features & Functions:

1. Unique door-free structure design. It makes this medical equipment easier and more convenient to operate.

2. Unique infusion supervision function. Key in a bed number and the infusion supervision management system at the nurse station will simultaneously display the infusion progress or alarm information of the patient of this bed number.

3. Air detector and pressure sensor can precisely detect tube air bubbles and blocking situation followed with an immediate alarm signal.

4. Application of double CPU, making the infusion process safer and more reliable.

Technical parameters:

Maximum size of outer shell: 120x140x190mm

Maximum weight: <2.0 kg

Power: (city electricity) 50/60Hz AC85-265V

Fuse: 220v2A*2, 12V2A*2

Maximum power consumption: 25VA, running more than five hours after being charged

Applicable infusion pipe: All standard IV sets

Feasible infusion speed range: 1-600ml/h

Infusion increment: 1ml/h

Feasible preset infusion volume limit: 1~9999ml

Accumulated infusion volume display: 1~9999ml

Infusion precision: +/-5%

Intravenous infusion speed: 1ml/h KVO rate

Alarm function:

Infusion completion; Occlusion; Low battery; Installation error; Infusion pipe air bubble; Liquid exhaustion.

Screen display:

Rate VOL; Limit Battery capacity; Accumulated infusion quantity; Battery charging indication;
AC power indication; Infusion completion; Occlusion alarm; Infusion pipe air bubble; Bed number.

Battery: Rechargeable lithium polymer battery, 7.4V, 1600mA

Electromagnetic compatibilitY(EMC): Complies with EN60601-1-2

Storage condition: Environment temperature- 5~50º Pressure 70~106kPa, relative humidity 30%~90%

Electrical safety: Comply with EN60601-1 for medical equipment and EN60601-1-2
 

Surgical Instrument--Infusion Pump (SK-600IB)
Technical Parameters:
Model: SK-600IB
Bolus: 600ml/h
Flow Rate Range: 1-2000ml/h
Volume Limit: 1-9999ml
Accuracy: + / - 5%
KVO Flow Rate: 1ml/h, keep vein open (KVO) rate
Power Supply: AC100-240V, 50/60Hz, 25VA

Max Power Consumption:

25W, can run for more than 5 hours continuously after fully recharged.
Battery Recharge:
When the pump is connected to the AC power, the battery will autimatically recharge (about 8-14 hours to recharge fully. )
Displayed Information:
Flow rate, voloum limit, accumulated voloum, power indicator light, bed No., air, occlusion, empty.
Alarm Information:
Infusion completion, occlusion, air bubble, low battery, control abnormal, No AC power supply, installation error.
Max Size of Outer Shell: 120*140*190mm (length*width*height)
Max Weight: Less than 2.5kg
Classification: Type BF
Outer Shell Material: ABS Plastic
Operation Condition:

Environment temperature +5 - +40, atmosphere pressure 86-106KPa, related humidity 20%-90%.
Storage and Transport Condition:
Environment temperature -15 - +50, atmosphere pressure 86-106kpa, related humidity 20%-90%.
Applicable Infusion Pipe: All standard infusion pipe.

Infusion Pump (SK-600I)
Features & Functions:
1. Unique door-free structure design. It makes this medical equipment easier and more convenient to operate.
2. Unique infusion supervision function. Key in a bed number and the infusion supervision management system at the nurse station will simultaneously display the infusion progress or alarm information of the patient of this bed number.
3. Air detector and pressure sensor can precisely detect tube air bubbles and blocking situation followed with an immediate alarm signal.
4. Application of double CPU, making the infusion process safer and more reliable.

Technical parameters:
Maximum size of outer shell: 120x140x190mm
Maximum weight: <2.0 kg
Power: (city electricity) 50/60Hz AC85-265V
Fuse: 220v2A*2, 12V2A*2
Maximum power consumption: 25VA, running more than five hours after being charged
Applicable infusion pipe: All standard IV sets
Feasible infusion speed range: 1-600ml/h
Infusion increment: 1ml/h
Feasible preset infusion volume limit: 1~9999ml
Accumulated infusion volume display: 1~9999ml
Infusion precision: +/-5%
Intravenous infusion speed: 1ml/h KVO rate

Alarm function:

Infusion completion; Occlusion; Low battery; Installation error; Infusion pipe air bubble; Liquid exhaustion.

Screen display:

Rate VOL; Limit Battery capacity; Accumulated infusion quantity; Battery charging indication;
AC power indication; Infusion completion; Occlusion alarm; Infusion pipe air bubble; Bed number.

Battery: Rechargeable lithium polymer battery, 7.4V, 1600mA

Electromagnetic compatibilitY(EMC): Complies with EN60601-1-2

Storage condition: Environment temperature- 5~50º Pressure 70~106kPa, relative humidity 30%~90%

Electrical safety: Comply with EN60601-1 for medical equipment and EN60601-1-2

XB-1102 Anaesthesia Syringe Pump
Product introduction:
XB-1102 Anaesthesia Syringe Pump is a kind of intellectualized automatic infusion devices, which is designed for delivery of anesthetic drugs by target-controlled infusion mode according to the pharmacokinetics and the experience in clinical use. It makes use of the integration of the technology of micro-processor control and precise manufacture. It is available for performing an intravenous analgesia infusion. It is Applicable to all the inpatient surgical anesthesia and endoscopic examination, sedation of ICU patients etc. It is characterized by accurate infusing, sufficient function and simple operation.

Functions and Features:
(1) Operation modes: Plasma target controlled infusion mode, Effect site target controlled infusion mode and Flow rate controlled infusion mode.
A) Plasma target controlled Infusion mode enables the users to set the target plasma concentration, Effect site target Controlled Infusion mode enables the users to set the target effect site concentration. The pump delivers drugs to maintain the desired concentration according to the pharmacokinetic model. The Infusion rates are altered automatically.
B) Flow Rate Controlled Infusion mode: It enables the users to control the infusion by setting the flow rate. There are seven flow rate units of available such as ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
(2) Available drugs: Fentanyl, Alfentanil, Sufentanil, Midazolam, Propofol, Etomidate, Vecuronium, Atracurium, Rocuronium, Remifentanil, Ketamine.
(3) Automatic compensation for drug when the infusion is paused and maintain the Plasma or Effect site concentration required.
Advanced intelligence, recovery time forecast function, which helps the doctors to stop the infusion at the right time.
(4) RS-232 communication: It enables the history data to be transmitted from pump to PC.
(5) Alarm and Warns: When something abnormal occurs, the pump can give out alarming and warning information such as AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged etc.
(6) Syringe available: All kinds of syringe whose standard capacity is in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting. And the infusion accuracy can be guaranteed.

SPECIFICATIONS:

Range of Flow rate:
10ml syringe: 0.1~300ml/h;
20ml syringe: 0.1~600ml/h;
50(60)ml syringe: 0.1~1200ml/h;
Suitable Syringe: All the syringe in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting.
Accuracy: +/-3% (on condition that the total infusion capacity is more than 5.0ml and the infusion rate is more than 2.0ml/h and the syringe extension set have been purged)
Display: A Large Screen(240*180pixel), rotary setting with convenient operation interface.
Non-volatile memory: The pump memories all the setup parameters and history data of the last infusion.

Operating conditions: >
Ambient temperature: +5~+40C
Relative humidity (RH): 30 %~75 %
Power supply:
AC: 100V~245V\50 +/-1Hz
Battery: 14.4V battery can use for more than three hours after charged for 10 hours.
Atmospheric pressure: 860~1060hPa
Dimension (mm): 336(L)*153(W)*132(H)
Weight: 2.5kg
Safety Classification: Class II and Type
 

XB-1101 syringe pump is a kind of intellectualized automatic infusion device which is designed for delivery of vein by a constant flow rate. The product can be applied to clinical application of intravenous Injection. It is characterized by precision of dosage rate, sufficient function and simple operation.

Functions and Features:
(1) Operation modes: Flow rate controlled infusion mode, volume and time controlled infusion mode.
A) flow rate controlled infusion mode: There are seven flow rate units of available such as ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
B) Volume and Time Controlled Infusion mode: It enables the users to control the infusion by setting the desired volume and the desired time to be infused, it will be the assistance to the traditional manual injection.
(2) Bolus function: Help patients to past the stimulative phase safely and steadily.
(3) KVO function: Automatically start the KVO(keep the vein open) infusion when the normal infusion stopped.
(4) Non-volatile memory: The pump memories all the setup parameters and history data of the last infusion.
(5) Alarm and Warns: When something abnormal occurs, the pump can give out alarming and warning information such as AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged etc.
(6) Available syringe: All kinds of syringe whose standard capacity is in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting. And the infusion accuracy can be guaranteed.

Infusion pump & syringe pump top manufacturer, welcome to contact Ms Sunny for further.

1> Flow rate: 1ml/h~1000ml/h or 1 drops/min ~250 drops/min.
2> 2 work modes: Liquid volume mode and drops mode, ml/h or drops/min.
3> 3 levels of occlusion value: Adjustable from high, meddle and low.
4> Free-flow protection: Prevent any free flow or leakage.
5> Reasonable and unique structure and design prevent bringing any air bubble and air bubble alarm error.
6> Drop detector: Automatically demarcate the accuracy of any IV set, accordingly improve the infusion accuracy.
7> Can use any standard of IV set, automatically remember this IV line type.
8> Rechargable battery.
9> Visible and audible alarms for any malfunction, air-on-line, operation error, unnormal flow rate and so on.

SPECIFICATIONS:
Range of Flow rate: 10ml syringe: 0.1~300ml/h;
20ml syringe: 0.1~400ml/h;
50(60)ml syringe: 0.1~600ml/h;
Accuracy: +/-3% (on condition that the total infusion capacity is more than 5.0ml and the infusion rate is more than 2.0ml/h and the syringe extension set have been purged)
Bolus rate: 300ml/h
Display: A large screen (128*64 pixel), rotary setting with convenient operation interface.
Operating conditions:
Ambient temperature: +5~+40C
Relative humidity (RH): 30 %~75 %
Power supply:
AC: 100V~245V\50 +/-1Hz
Battery: 14.4V battery can use for more than 3 hours after charged for 10 hours.
Atmospheric pressure: 860~1060hPa
Dimension (mm): 336(L)*153(W)*132(H)
Weight: 2.5kg
Safety Classification: Class II and Type C

Top manufacturer of infusion pump, welcome to contact Ms Sunny for further.
1> Flow rate: 1ml/h~1000ml/h or 1 drops/min ~250 drops/min.
2> 2 work modes: Liquid volume mode and drips mode, ml/h or drops/min.
3> 3 levels of occlusion value: Adjustable from high, meddle and low.
4> Free-flow Fprotection: Prevent any free flow or leakage.
5> Reasonable and unique structure and design prevent bringing any air bubble and air bubble alarm error.
6> Drop detector: Automatically demarcate the accuracy of any IV set, accordingly improve the infusion accuracy.
7> Can use any standard of IV set, automatically remember this IV line type.
8> Rechargable battery.
9> Visble and audible alarms for any malfunction, air-on-line, operation error, unnormal flow rate and so on.