Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: ≤600VA
Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: < 45 min
Noise level: ≤55dBA
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer0~9999 hour 59 minutes
Accumulative error of blue light timing≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38
Deviation alarm: air temperature control ±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight83Kg
Net Weight69Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: ≤600VA
Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: < 45 min
Noise level: ≤55dBA
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer0~9999 hour 59 minutes
Accumulative error of blue light timing≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38
Deviation alarm: air temperature control ±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight83Kg
Net Weight69Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: ≤600VA
Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: < 45 min
Noise level: ≤55dBA
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer0~9999 hour 59 minutes
Accumulative error of blue light timing≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38
Deviation alarm: air temperature control ±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight83Kg
Net Weight69Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: ≤600VA
Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: < 45 min
Noise level: ≤55dBA
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer0~9999 hour 59 minutes
Accumulative error of blue light timing≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38
Deviation alarm: air temperature control ±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight83Kg
Net Weight69Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V,50HZ
Power input: ≤600VA
Temperature control range25~37
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: < 45 min
Noise level: ≤55dBA
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer0~9999 hour 59 minutes
Accumulative error of blue light timing≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38
Deviation alarm: air temperature control ±3
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight83Kg
Net Weight69Kg
Measurement1085mm×640mm×1080mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

Brief introduction:
servo-controlled by micro-computer; double wall hood an reduce the heating losing and the effect of outer heat resource; automatic curtain can reduce the heat losing ; inclination of infant bed can be adjusted; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp and auxiliary temperature are displayed separately; >37 temperature setting; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; whole aluminum water tank, and it can be filled with water or discharge; RS 232 connector, data output.

Standard configure:
Hood, infant bed, temperature controller, skin temperature sensor, water tank, air filter, Guardrail, I.V. Pole, cabinet.
Technical specification:
Power supply : AC220V,50HZ
Power input: 600VA
Air Temperature control range25~37 can override to 39
Skin Temperature control range34~37 can override to 38
Sensor precision: ≤0.3
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: ≤30min
Noise level: ≤55dBA
Inclination of bassinet: 0°~5°

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater (except for the low deviation alarm), meanwhile, the skin temperature indication window can indicate the alarm code. For the alarm 1-6, the relevant light is on, and for the alarm 7, all alarming lights are on; all alarm sound can be cancelled except for the power failure alarm and the system alarm.
Over-temp alarm: when the air temperature control ≤38(setting temperature is less than 37 ), or≤40(setting temperature is more than 37)skin temperature control ≤40;
Upper Deviation alarm: air temperature control +3.0, skin temperature control +1.0
Lower Deviation alarm: air temperature control -3.0, skin temperature control -1.0
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight70Kg
Net Weight 59Kg
Measurement1085mm×640mm×915mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

Brief introduction:
servo-controlled by micro-computer; double wall hood an reduce the heating losing and the effect of outer heat resource; automatic curtain can reduce the heat losing ; inclination of infant bed can be adjusted; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp and auxiliary temperature are displayed separately; >37 temperature setting; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; whole aluminum water tank, and it can be filled with water or discharge; RS 232 connector, data output.

Standard configure:
Hood, infant bed, temperature controller, skin temperature sensor, water tank, air filter, Guardrail, I.V. Pole, cabinet.
Technical specification:
Power supply : AC220V,50HZ
Power input: 600VA
Air Temperature control range25~37 can override to 39
Skin Temperature control range34~37 can override to 38
Sensor precision: ≤0.3
Changing of temperature: ≤0.5
Uniformity of temperature: ≤0.8
Temperature rising time: ≤30min
Noise level: ≤55dBA
Inclination of bassinet: 0°~5°

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater (except for the low deviation alarm), meanwhile, the skin temperature indication window can indicate the alarm code. For the alarm 1-6, the relevant light is on, and for the alarm 7, all alarming lights are on; all alarm sound can be cancelled except for the power failure alarm and the system alarm.
Over-temp alarm: when the air temperature control ≤38(setting temperature is less than 37 ), or≤40(setting temperature is more than 37)skin temperature control ≤40;
Upper Deviation alarm: air temperature control +3.0, skin temperature control +1.0
Lower Deviation alarm: air temperature control -3.0, skin temperature control -1.0
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package
Gross Weight70Kg
Net Weight 59Kg
Measurement1085mm×640mm×915mm

Notice
Some technical data of this model can be changed properly in standard permission range according to the standard and users requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.

I. Applications:
It is a necessary apparatus for scientific researches, being applicable to storage of strains and culture of organisms in the fields of medical treatment, public health, pharmaceuticals, biology and agricultural science.
II. Features:
1..Intelligent temperature controller is based microprocessor with PID parameters controlling function .Digital display of set and actual temperatures. High temperature controlling accuracy and reliability.
2. There is a layer of toughtoned-glass door with sealing rubber as the inner lay of the outer door for convenient observation of the in-incubator conditions during is without affecting in-incubator temperature .
3. The working chamber use mirror stainless steel and the arc roundish are easy to clean.

Technical Datas:

1. Main Voltage:   220V, 50Hz

2.Temperature Control range:   RT+5~65

3.Temperature Fluctuation:   ± 0.5

4.Consumption Power:   250W

5.Dimensions of the working chamber:  400 x 400 x 500mm

I. Applications:
It is a necessary apparatus for scientific researches, being applicable to storage of strains and culture of organisms in the fields of medical treatment, public health, pharmaceuticals, biology and agricultural science.
II. Features:
1..Intelligent temperature controller is based microprocessor with PID parameters controlling function .Digital display of set and actual temperatures. High temperature controlling accuracy and reliability.
2. There is a layer of toughtoned-glass door with sealing rubber as the inner lay of the outer door for convenient observation of the in-incubator conditions during is without affecting in-incubator temperature .
3. The working chamber use mirror stainless steel and the arc roundish are easy to clean.

Technical Datas:

1. Main Voltage:   220V, 50Hz

2.Temperature Control range:   RT+5~65

3.Temperature Fluctuation:   ± 0.5

4.Consumption Power:   200W

5.Dimensions of the working chamber:  350 x 350 x 410mm